| 1. |
- Abitbol, Tiffany, et al.
(författare)
-
Nanocellulose-Based Hybrid Materials for UV Blocking and Mechanically Robust Barriers
- 2020
-
Ingår i: ACS Applied Bio Materials. - : American Chemical Society (ACS). - 2576-6422. ; 3:4, s. 2245-2254
-
Tidskriftsartikel (refereegranskat)abstract
- Nanocellulose (NC)-based hybrid coatings and films containing CeO2 and SiO2 nanoparticles (NPs) to impart UV screening and hardness properties, respectively, were prepared by solvent casting. The NC film-forming component (75 wt % of the overall solids) was composed entirely of cellulose nanocrystals (CNCs) or of CNCs combined with cellulose nanofibrils (CNFs). Zeta potential measurements indicated that the four NP types (CNC, CNF, CeO2, and SiO2) were stably dispersed in water and negatively charged at pH values between 6 and 9. The combination of NPs within this pH range ensured uniform formulations and homogeneous coatings and films, which blocked UV light, the extent of which depended on film thickness and CeO2 NP content, while maintaining good transparency in the visible spectrum (∼80%). The addition of a low amount of CNFs (1%) reduced the film hardness, but this effect was compensated by the addition of SiO2 NPs. Chiral nematic self-assembly was observed in the mixed NC film; however, this ordering was disrupted by the addition of the oxide NPs. The roughness of the hybrid coatings was reduced by the inclusion of oxide NPs into the NC matrix perhaps because the spherical oxide NPs were able to pack into the spaces between cellulose fibrils. We envision these hybrid coatings and films in barrier applications, photovoltaics, cosmetic formulations, such as sunscreens, and for the care and maintenance of wood and glass surfaces, or other surfaces that require a smooth, hard, and transparent finish and protection from UV damage.
|
|
| 2. |
|
|
| 3. |
- Aguirre, Miren, et al.
(författare)
-
Hybrid acrylic/CeO2 nanocomposites using hydrophilic, spherical and high aspect ratio CeO2 nanoparticles
- 2014
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 2:47, s. 20280-20287
-
Tidskriftsartikel (refereegranskat)abstract
- A dispersion of CeO2 nanoparticles and nanorods stabilized with nitrilotriacetic acid (NTA) and a 4,4'-azobis(4-cyanovaleric acid) (V-501) initiator has been used to initiate the emulsion polymerization of acrylic monomers, yielding stable hybrid CeO2 nanoparticle-nanorod/polyacrylate latexes for the first time. Films cast from these hybrid latexes are transparent due to the very homogenous distribution of the polymer compatibilized CeO2. Furthermore, it has been proven that the UV-Vis absorption capacity of the hybrid latexes is enhanced with the incorporation of the nanorods.
|
|
| 4. |
- Ahniyaz, Anwar, et al.
(författare)
-
Preparation of iron oxide nanocrystals by surfactant-free or oleic acid-assisted thermal decomposition of a Fe(III) alkoxide
- 2008
-
Ingår i: Journal of Magnetism and Magnetic Materials. - : Elsevier BV. - 0304-8853 .- 1873-4766. ; 320:6, s. 781-787
-
Tidskriftsartikel (refereegranskat)abstract
- A new non-hydrolytic, alkoxide-based route was developed to synthesize iron oxide nanocrystals. Surfactant-free thermal decomposition of the iron 2-methoxy-ethoxide precursors results in the formation of uniform iron oxide nanocrystals with an average size of 5.6 nm. Transmission electron microscope study shows that the nanocrystals are protected against aggregation by a repulsive surface layer, probably originating from the alkoxy-alkoxide ligands. Addition of oleic acid resulted in monodisperse nanocrystals with an average size of 4 nm. Mössbauer analysis confirmed that the nanocrystals mainly consisted of maghemite. Analysis of the magnetic hysteresis loop measurements and the zero field and field cooled measurements displayed an excellent fit to established theories for single-domain superparamagnetic nanocrystals and the size of the magnetic domains correlated well to the crystallite size obtained from transmission electron microscope.
|
|
| 5. |
- Ahniyaz, Anwar, et al.
(författare)
-
Progress in solid-state high voltage lithium-ion battery electrolytes
- 2021
-
Ingår i: Advances in Applied Energy. - : Elsevier BV. - 2666-7924. ; 4
-
Tidskriftsartikel (refereegranskat)abstract
- Developing high specific energy Lithium-ion (Li-ion) batteries is of vital importance to boost the production of efficient electric vehicles able to meet the customers’ expectation related to the electric range of the vehicle. One possible pathway to high specific energy is to increase the operating voltage of the Li-ion cell. Cathode materials enabling operation above 4.2 V are available. The stability of the positive electrode-electrolyte interface is still the main bottleneck to develop high voltage cells. Moreover, important research efforts are devoted to the substitution of graphite anodes with Li metal: this would improve the energy density of the cell dramatically. The use of metallic lithium is prevented by the dendrite growth during charge, with consequent safety problems. To suppress the formation of dendrites solid-state electrolytes are considered the most promising approach. For these reasons the present review summarizes the most recent research efforts in the field of high voltage solid-state electrolytes for high energy density Li-ion cells.
|
|
| 6. |
|
|
| 7. |
- Alvarez-Asencio, Ruben, et al.
(författare)
-
Solventless synthesis of cerium oxide nanoparticles and their application in UV protective clear coatings
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 10:25, s. 14818-14825
-
Tidskriftsartikel (refereegranskat)abstract
- Colloidal dispersions of cerium oxide nanoparticles are of importance for numerous applications including as catalysts, chemical mechanical polishing agents and additives for UV protective and anticorrosion coatings. Here, concentrated oleate-coated cerium oxide nanoparticles (CeO2 NPs) with a uniform size have been produced by solventless thermolysis of cerium-oleate powder under low pressure at 320 °C and subsequently dispersed in hexane. Unlike any previously reported colloidal synthesis process for ceria nanoparticles, this process does not involve any toxic high boiling point organic solvent that requires subsequent removal at high cost. Although the process is very simple, highly concentrated cerium oxide nanoparticles with more than 17 wt% solid content and 70% of the theoretical yield can be easily obtained. Moreover, the size, shape and crystallinity of cerium oxide nanoparticles can be tailored by changing the thermal decomposition temperature and reaction time. Moreover, the new synthesis route developed in this study allows the synthesis of clean and dispersible ceria nanoparticles at a relatively low cost in a single step. The prepared ceria nanoparticles have an excellent UV absorption property and remain transparent to visible light, thus having the potential to replace potentially hazardous organic compounds in UV absorbing clear coatings. As a proof of concept, the prepared dispersions of cerium oxide nanoparticles in hexane were formulated into a solvent borne binder base to develop clear UV protecting coatings for light sensitive substrates. The general synthesis strategy presented in this study is generally applicable for the low-cost production of a concentrated dispersion of metal oxide nanoparticles with minimal environmental impact.
|
|
| 8. |
|
|
| 9. |
- Booth, Andy, et al.
(författare)
-
Freshwater dispersion stability of PAA-stabilised cerium oxide nanoparticles and toxicity towards Pseudokirchneriella subcapitata
- 2015
-
Ingår i: Science of the Total Environment. - : Elsevier BV. - 0048-9697 .- 1879-1026. ; 505, s. 596-605
-
Tidskriftsartikel (refereegranskat)abstract
- An aqueous dispersion of poly (acrylic acid)-stabilised cerium oxide (CeO2) nanoparticles (PAA-CeO2) was evaluated for its stability in a range of freshwater ecotoxicity media (MHRW, TG 201 and M7), with and without natural organic matter (NOM). In a 15day dispersion stability study, PAA-CeO2 did not undergo significant aggregation in any media type. Zeta potential varied between media types and was influenced by PAA-CeO2 concentration, but remained constant over 15days. NOM had no influence on PAA-CeO2 aggregation or zeta potential. The ecotoxicity of the PAA-CeO2 dispersion was investigated in 72h algal growth inhibition tests using the freshwater microalgae Pseudokirchneriella subcapitata. PAA-CeO2 EC50 values for growth inhibition (GI; 0.024mg/L) were 2-3 orders of magnitude lower than pristine CeO2 EC50 values reported in the literature. The concentration of dissolved cerium (Ce3+/Ce4+) in PAA-CeO2 exposure suspensions was very low, ranging between 0.5 and 5.6μg/L. Free PAA concentration in the exposure solutions (0.0096-0.0384mg/L) was significantly lower than the EC10 growth inhibition (47.7mg/L) value of pure PAA, indicating that free PAA did not contribute to the observed toxicity. Elemental analysis indicated that up to 38% of the total Cerium becomes directly associated with the algal cells during the 72h exposure. TOF-SIMS analysis of algal cell wall compounds indicated three different modes of action, including a significant oxidative stress response to PAA-CeO2 exposure. In contrast to pristine CeO2 nanoparticles, which rapidly aggregate in standard ecotoxicity media, PAA-stabilised CeO2 nanoparticles remain dispersed and available to water column species. Interaction of PAA with cell wall components, which could be responsible for the observed biomarker alterations, could not be excluded. This study indicates that the increased dispersion stability of PAA-CeO2 leads to an increase in toxicity compared to pristine non-stabilised forms.
|
|
| 10. |
- Dobryden, Illia, et al.
(författare)
-
Bio-Based Binder Development for Lithium-Ion Batteries.
- 2023
-
Ingår i: Materials. - 1996-1944. ; 16:16
-
Tidskriftsartikel (refereegranskat)abstract
- The development of rechargeable lithium-ion battery (LIB) technology has facilitated the shift toward electric vehicles and grid storage solutions. This technology is currently undergoing significant development to meet industrial applications for portable electronics and provide our society with "greener" electricity. The large increase in LIB production following the growing demand from the automotive sector has led to the establishment of gigafactories worldwide, thus increasing the substantial consumption of fossil-based and non-sustainable materials, such as polyvinylidene fluoride and/or styrene-butadiene rubber as binders in cathode and anode formulations. Furthermore, the use of raw resources, such as Li, Ni, and Mn in cathode active materials and graphite and nanosilicon in anodes, necessitates further efforts to enhance battery efficiency. To foster a global sustainable transition in LIB manufacturing and reduce reliance on non-sustainable materials, the implementation of bio-based binder solutions for electrodes in LIBs is crucial. Bio-based binders such as cellulose, lignin, alginate, gums, starch, and others can address environmental concerns and can enhance LIBs' performance. This review aims to provide an overview of the current progress in the development and application of bio-based binders for LIB electrode manufacturing, highlighting their significance toward sustainable development.
|
|
