| 1. |
- Ajalloueian, Fatemeh, et al.
(författare)
-
A bedside collagen-PLGA nanofibrous construct for autologous transplantation of minced bladder mucosal
- 2012
-
Ingår i: Journal of Tissue Engineering and Regenerative Medicine. - : Hindawi Limited. - 1932-6254. ; 6:suppl 1, s. 128-128
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Introduction: Bladder regeneration using minced bladder mucosa is an alternative to costly and time-consuming conventional in vitro culturing of urothelial cells. In this method, the uroepithelium expands in vivo and the patient body appears as an incubator. With our preliminary successes, designing an appropriate scaffold that supports in vivo cell expansion and surgical handling in a clinical setting was our aim. This study, investigates cell expansion in a hybrid construct of collagen/poly (lactic-co-glycolide)(PLGA).Materials and methods: An electrospun PLGA mat was placed on a semi-gel collagen inside a mold and covered with a second collagen layer. After gel formation, minced particles of pig bladder mucosa were seeded on the hybrid construct and then processed by plastic compression (PC). The scaffolds were incubated for 2, 4 and 6 weeks in vitro for further studies.Results: Tensile tests show an increase in tensile strength of 0.6 ± 0.1 MPa in PC collagen to 3.6 ± 1.1 MPa in hybrid construct. Morphological studies, histological staining and SEM show that the construct has kept its integrity during the time and proliferated urothelial cells have reached confluence after 4 weeks and a multi-layered urothelium after 6 weeks.Conclusion: We have designed a mechanically robust scaffold that permits surgical handling and tissue expansion in vivo. The construct is easy-to-use for clinical application in an ordinary surgical operating theater for bladder regeneration.
|
|
| 2. |
- Ajalloueian, Fatemeh, et al.
(författare)
-
Bladder biomechanics and the use of scaffolds for regenerative medicine in the urinary bladder
- 2018
-
Ingår i: Nature reviews. Urology. - : Springer Science and Business Media LLC. - 1759-4812 .- 1759-4820. ; 15:3, s. 155-174
-
Forskningsöversikt (refereegranskat)abstract
- The urinary bladder is a complex organ with the primary functions of storing urine under low and stable pressure and micturition. Many clinical conditions can cause poor bladder compliance, reduced capacity, and incontinence, requiring bladder augmentation or use of regenerative techniques and scaffolds. To replicate an organ that is under frequent mechanical loading and unloading, special attention towards fulfilling its biomechanical requirements is necessary. Several biological and synthetic scaffolds are available, with various characteristics that qualify them for use in bladder regeneration in vitro and in vivo, including in the treatment of clinical conditions. The biomechanical properties of the native bladder can be investigated using a range of mechanical tests for standardized assessments, as well as mathematical and computational bladder biomechanics. Despite a large body of research into tissue engineering of the bladder wall, some features of the native bladder and the scaffolds used to mimic it need further elucidation. Collection of comparable reference data from different animal models would be a helpful tool for researchers and will enable comparison of different scaffolds in order to optimize characteristics before entering preclinical and clinical trials.
|
|
| 3. |
- Ajalloueian, Fatemeh, et al.
(författare)
-
Constructs of electrospun PLGA, compressed collagen and minced urothelium for minimally manipulated autologous bladder tissue expansion
- 2014
-
Ingår i: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 35:22, s. 5741-5748
-
Tidskriftsartikel (refereegranskat)abstract
- Bladder regeneration based on minced bladder mucosa in vivo expansion is an alternative to in vitro culturing of urothelial cells. Here, we present the design of a hybrid, electrospun poly(lactic-co-glycolide) (PLGA) - plastically compressed (PC) collagen scaffold that could allow in vivo bladder mucosa expansion. Optimisation of electrospinning was performed in order to obtain increased pore sizes and porosity to consolidate the construct and to support neovascularisation and tissue ingrowth. Tensile tests showed an increase in average tensile strength from 0.6 MPa for PC collagen to 3.57 MPa for the hybrid construct. The optimised PLGA support scaffold was placed between two collagen gels, and the minced tissue was distributed either on top or both on top and inside the construct prior to PC; this was then cultured for up to four weeks. Morphology, histology and SEM demonstrated that the construct maintained its integrity throughout cell culture. Cells from minced tissue migrated, expanded and re-organised to a confluent cell layer on the top of the construct after two weeks and formed a multilayered urothelium after four weeks. Cell morphology and phenotype was typical for urothelial mucosa during tissue culture. (C) 2014 Elsevier Ltd. All rights reserved.
|
|
| 4. |
- Ajalloueian, Fatemeh, et al.
(författare)
-
Emulsion Electrospinning as an Approach to Fabricate PLGA/Chitosan Nanofibers for Biomedical Applications
- 2014
-
Ingår i: BioMed Research International. - : Hindawi Publishing Corporation. - 2314-6133 .- 2314-6141. ; :475280
-
Tidskriftsartikel (refereegranskat)abstract
- Novel nanofibers from blends of polylactic-co-glycolic acid (PLGA) and chitosan have been produced through an emulsion electrospinning process. The spinning solution employed polyvinyl alcohol (PVA) as the emulsifier. PVA was extracted from the electrospun nanofibers, resulting in a final scaffold consisting of a blend of PLGA and chitosan. The fraction of chitosan in the final electrospun mat was adjusted from 0 to 33%. Analyses by scanning and transmission electron microscopy show uniform nanofibers with homogenous distribution of PLGA and chitosan in their cross section. Infrared spectroscopy verifies that electrospun mats contain both PLGA and chitosan. Moreover, contact angle measurements show that the electrospun PLGA/chitosanmats are more hydrophilic than electrospun mats of pure PLGA. Tensile strengths of 4.94 MPa and 4.21 MPa for PLGA/chitosan in dry and wet conditions, respectively, illustrate that the polyblend mats of PLGA/chitosan are strong enough for many biomedical applications. Cell culture studies suggest that PLGA/chitosan nanofibers promote fibroblast attachment and proliferation compared to PLGA membranes. It can be assumed that the nanofibrous composite scaffold of PLGA/chitosan could be potentially used for skin tissue reconstruction.
|
|
| 5. |
- Ajalloueian, Fatemeh, et al.
(författare)
-
Investigation of Human Mesenchymal Stromal Cells Cultured on PLGA orPLGA/Chitosan Electrospun Nanofibers
- 2015
-
Ingår i: Journal of Bioprocessing & Biotechniques. - : OMICS Publishing Group. - 2155-9821. ; 5:6
-
Tidskriftsartikel (refereegranskat)abstract
- We compared the viability, proliferation, and differentiation of human Mesenchymal Stromal Cells (MSC)after culture on poly(lactic-co-glycolic acid) (PLGA) and PLGA/chitosan (PLGA/CH) hybrid scaffolds. We appliedconventional and emulsion electrospinning techniques, respectively, for the fabrication of the PLGA and PLGA/CH scaffolds. Electrospinning under optimum conditions resulted in an average fiber diameter of 166 ± 33 nmfor the PLGA/CH and 680 ± 175 nm for the PLGA scaffold. The difference between the tensile strength of thePLGA and PLGA/CH nanofibers was not significant, but PLGA/CH showed a significantly lower tensile modulusand elongation at break. However, it should be noted that the extensibility of the PLGA/CH was higher than thatof the nanofibrous scaffolds of pure chitosan. As expected, a higher degree of hydrophilicity was seen with PLGA/CH, as compared to PLGA alone. The biocompatibility of the PLGA and PLGA/CH scaffolds was compared usingMTS assay as well as analysis by scanning electron microscopy and confocal microscopy. The results showed thatboth scaffold types supported the viability and proliferation of human MSC, with significantly higher rates on PLGA/CH nanofibers. Nonetheless, an analysis of gene expression of MSC grown on either PLGA or PLGA/CH showed asimilar differentiation pattern towards bone, nerve and adipose tissues.
|
|
| 6. |
- Ajalloueian, Fatemeh, et al.
(författare)
-
One-Stage Tissue Engineering of Bladder Wall Patches for an Easy-To-Use Approach at the Surgical Table
- 2013
-
Ingår i: Tissue Engineering. Part C, Methods. - : Mary Ann Liebert Inc. - 1937-3384 .- 1937-3392. ; 19:9, s. 688-696
-
Tidskriftsartikel (refereegranskat)abstract
- We present a method for producing a cell-scaffold hybrid construct at the bedside. The construct is composed of plastic-compressed collagen together with a poly(e-caprolactone) (PCL)-knitted mesh that yields an integrated, natural-synthetic scaffold. This construct was evaluated by seeding of minced bladder mucosa, followed by proliferation in vitro. High mechanical strength in combination with a biological environment suitable for tissue growth was achieved through the creation of a hybrid construct that showed an increased tensile strength (17.9 +/- 2.6 MPa) when compared to plastic-compressed collagen (0.6 +/- 0.12 MPa). Intimate contact between the collagen and the PCL fabric was required to ensure integrity without delamination of the construct. This contact was achieved by surface alkaline hydrolysis of the PCL, followed by adsorption of poly(vinyl) alcohol. The improvement in hydrophilicity of the PCL-knitted mesh was confirmed through water contact angle measurements, and penetration of the collagen into the mesh was evaluated by scanning electron microscopy (SEM). Particles of minced bladder mucosa tissue were seeded onto this scaffold, and the proliferation was followed for 6 weeks in vitro. Results obtained from phase contrast microscopy, SEM, and histological staining indicated that cells migrated from the minced tissue particles and reorganized on the scaffold. Cells were viable and proliferative, with morphological features characteristic of urothelial cells. Proliferation reached the point at which a multilayer with a resemblance to stratified urothelium was achieved. This successful method could potentially be used for in vivo applications in reconstructive urology as an engineered autologous tissue transplant without the requirement for in vitro culture before transplantation.
|
|
| 7. |
- Sarigiannidou, Krystalia, et al.
(författare)
-
Interfacial Properties of Pea Protein Hydrolysate: The Effect of Ionic Strength
- 2022
-
Ingår i: Colloids and Interfaces. - : MDPI AG. - 2504-5377. ; 6:4
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of a tryptic hydrolysis as well as the effect of ionic strength (0–0.4 M NaCl) was investigated on the oil/water interfacial properties of soluble pea protein hydrolysate (SPPH) at neutral pH and room temperature (20 ± 0.01 °C). SEC-MALS and SDS-Page analysis showed that tryptic hydrolysis created a lower molecular weight polypeptide mixture, whereas FTIR analysis and DSC thermograms demonstrated a more disordered and flexible structure. The bulk properties of SPPH were studied in terms of hydrodynamic diameter and turbidity, where higher particle size (+ ~13 nm) and turbidity were observed at 0.4 M NaCl. Regarding the interfacial properties, the surface activity of SPPH improved by increasing ionic strength, with maximum interfacial pressure (14.28 mN/m) at 0.4 M NaCl. Nevertheless, the addition of NaCl negatively affected the elasticity and strength of the interfacial film, where the sample without salt exhibited the highest dilatational and shear storage modulus in all the frequencies considered.
|
|
