1. |
- Farooqui, Maaz, 1987-, et al.
(författare)
-
Sound attenuation in ducts using locally resonant periodic aluminum patches
- 2016
-
Ingår i: Journal of the Acoustical Society of America. - : Acoustical Society of America (ASA). - 0001-4966 .- 1520-8524. ; 139:6, s. 3276-3286
-
Tidskriftsartikel (refereegranskat)abstract
- In recent years, the control of low frequency noise has received a lot of attention for several applications. Traditional passive noise control techniques using Helmholtz resonators have size limitations in the low frequency range because of the long wavelength. Promising noise reductions, with flush mounted aluminum patches with no size problems can be obtained using local resonance phenomenon implemented in acoustic metamaterial techniques. The objective of this work is to introduce locally resonant thin aluminum patches flush mounted to a duct walls aiming at creating frequency stop bands in a specific frequency range. Green's function is used within the framework of interface response theory to predict the amount of attenuation of the local resonant patches. The two-port theory and finite elements are also used to predict the acoustic performance of these patches. No flow measurements were conducted and show good agreement with the models. The effect of varying the damping and the masses of the patches are used to expand the stop bandwidth and the effect of both Bragg scattering and the locally resonant mechanisms was demonstrated using mathematical models. The effect of the arrays of patches on the effective dynamic density and bulk modulus has also been investigated.
|
|
2. |
- Farooqui, Maaz, 1987-, et al.
(författare)
-
Validation of low frequency noise attenuation using locally resonant patches
- 2016
-
Ingår i: Journal of the Acoustical Society of America. - : Acoustical Society of America (ASA). - 0001-4966 .- 1520-8524.
-
Tidskriftsartikel (refereegranskat)abstract
- Since conventional silencers in acoustic ducts have problems of size limitations at low frequencies and being prone to high backpressure, locally resonant aluminum patches are introduced in acoustic duct walls aiming at creating frequency stop bands in the low frequency region (below 1 KHz). With these flush mounted patches, promising noise reductions, with no such drawbacks, can be obtained, building on local resonance phenomenon implemented in acoustic metamaterials techniques. The objective of the current paper is to experimentally validate the performance of an array of flexible side-wall-mounted patches inside ducts. The experimental results are compared with Analytical Green's function method as well as Numerical Finite Element Method and a close agreement was found. The results show that the presence of the patches singly or periodically can play a prominent role in designing any acousticbandgap materials. The effect of the arrays of patches on the effective dynamic density and bulk modulushas also been investigated.
|
|
3. |
- Okda, Sherif, et al.
(författare)
-
Testing of the Aerodynamic Characteristics of an Inflatable Airfoil Section
- 2020
-
Ingår i: Journal of Aerospace Engineering. - 1943-5525 .- 0893-1321. ; 33:5
-
Tidskriftsartikel (refereegranskat)abstract
- Inflatable structures are characterized by being light and easy to manufacture and deploy. Hence, they find many applications in aerospace and aeronautical engineering. In this paper, an inflatable segment with a The National Advisory Committee for Aeronautics (NACA) 0021 airfoil cross-section is designed, fabricated, and tested. The geometrical accuracy of the manufactured inflatable segment is measured using laser scanning. Measurements show that the average normalized error of the chord length and thickness are 2.97% and 0.554%, respectively. The aerodynamic behavior of the inflatable segment is then tested in a wind tunnel at different wind speeds and angles of attack. Lift forces are measured using a six-component balance, while the drag forces are calculated from the wake measurements. The lift and drag coefficients of the inflatable section are compared to those of a standard NACA 0021 airfoil. Finally, flow visualization is examined at different angles of attack using two methods: smoke and tufts. Both methods show that flow separation starts at 15° and full stall occurs at 25°. Results indicate that inflatables can find more applications in the design and construction of aerodynamic structures, such as wings.
|
|