| 1. |
- Park, Seung Hyun, et al.
(författare)
-
Nonpharmaceutical interventions reduce the incidence and mortality of COVID-19: A study based on the survey from the International COVID-19 Research Network (ICRN)
- 2023
-
Ingår i: Journal of Medical Virology. - : WILEY. - 0146-6615 .- 1096-9071. ; 95:2
-
Tidskriftsartikel (refereegranskat)abstract
- The recently emerged novel coronavirus, "severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2)," caused a highly contagious disease called coronavirus disease 2019 (COVID-19). It has severely damaged the worlds most developed countries and has turned into a major threat for low- and middle-income countries. Since its emergence in late 2019, medical interventions have been substantial, and most countries relied on public health measures collectively known as nonpharmaceutical interventions (NPIs). We aimed to centralize the accumulative knowledge of NPIs against COVID-19 for each country under one worldwide consortium. International COVID-19 Research Network collaborators developed a cross-sectional online survey to assess the implications of NPIs and sanitary supply on the incidence and mortality of COVID-19. The survey was conducted between January 1 and February 1, 2021, and participants from 92 countries/territories completed it. The association between NPIs, sanitation supplies, and incidence and mortality were examined by multivariate regression, with the log-transformed value of population as an offset value. The majority of countries/territories applied several preventive strategies, including social distancing (100.0%), quarantine (100.0%), isolation (98.9%), and school closure (97.8%). Individual-level preventive measures such as personal hygiene (100.0%) and wearing facial masks (94.6% at hospitals; 93.5% at mass transportation; 91.3% in mass gathering facilities) were also frequently applied. Quarantine at a designated place was negatively associated with incidence and mortality compared to home quarantine. Isolation at a designated place was also associated with reduced mortality compared to home isolation. Recommendations to use sanitizer for personal hygiene reduced incidence compared to the recommendation to use soap. Deprivation of masks was associated with increased incidence. Higher incidence and mortality were found in countries/territories with higher economic levels. Mask deprivation was pervasive regardless of economic level. NPIs against COVID-19 such as using sanitizer, quarantine, and isolation can decrease the incidence and mortality of COVID-19.
|
|
| 2. |
- Gevari, Moein Talebian, et al.
(författare)
-
Engineered Lateral Roughness Element Implementation and Working Fluid Alteration to Intensify Hydrodynamic Cavitating Flows on a Chip for Energy Harvesting
- 2020
-
Ingår i: Micromachines. - : MDPI. - 2072-666X. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrodynamic cavitation is considered an effective tool to be used in different applications, such as surface cleaning, ones in the food industry, energy harvesting, water treatment, biomedical applications, and heat transfer enhancement. Thus, both characterization and intensification of cavitation phenomenon are of great importance. This study involves design and optimization of cavitation on chip devices by utilizing wall roughness elements and working fluid alteration. Seven different microfluidic devices were fabricated and tested. In order to harvest more energy from cavitating flows, different roughness elements were used to decrease the inlet pressure (input to the system), at which cavitation inception occurs. The implemented wall roughness elements were engineered structures in the shape of equilateral triangles embedded in the design of the microfluidic devices. The cavitation phenomena were also studied using ethanol as the working fluid, so that the fluid behavior differences in the tested cavitation on chip devices were explained and compared. The employment of the wall roughness elements was an effective approach to optimize the performances of the devices. The experimental results exhibited entirely different flow patterns for ethanol compared to water, which suggests the dominant effect of the surface tension on hydrodynamic cavitation in microfluidic channels.
|
|
| 3. |
- Shafaghi, Ali Hosseinpour, et al.
(författare)
-
On cavitation inception and cavitating flow patterns in a multi-orifice microfluidic device with a functional surface
- 2021
-
Ingår i: Physics of fluids. - : AMER INST PHYSICS. - 1070-6631 .- 1089-7666. ; 33:3
-
Tidskriftsartikel (refereegranskat)abstract
- During the last decade, hydrodynamic cavitation has been implemented in various applications such as energy harvesting and biomedical applications. Facile hydrodynamic cavitation methods are required for fulfilling the requirements in these applications. In this study, a new generation microfluidic device containing eight parallel micro-orifices with a new design was fabricated and tested with the purpose of intensifying the cavitating flows and early cavitation inception. The roughness elements in the micro-orifices facilitated cavitation inception. This study presents a general perspective of occurrence of different cavitating flow patterns in microscale and addresses the ambiguities about the conditions for the formation of a specific flow pattern. Cavitation inception occurred with the appearance of small bubbles emerging from roughness elements at a rather low upstream pressure in the open loop experimental setup. A reduction in the cavitation number resulted in the formation of different flow patterns such as cavitation clouds, twin cavities, sheet cavities, and bubbly flows. Having several flow patterns with different intensities all together within a single microfluidic device is the main advantage of the proposed device over the state of the art microfluidic devices. Generation of flow patterns with various released energy levels makes this proposed device a unique multi-functional platform, which can be implemented to a lab on a chip platform for applications such as nanoparticle synthesis and wound healing.
|
|
| 4. |
- Shafaghi, Ali Hosseinpour, et al.
(författare)
-
On the Effect of the Respiratory Droplet Generation Condition on COVID-19 Transmission
- 2020
-
Ingår i: Fluids. - : MDPI. - 2311-5521. ; 5:3
-
Tidskriftsartikel (refereegranskat)abstract
- Coronavirus (COVID-19) is a highly infectious viral disease and first appeared in Wuhan, China. Within a short time, it has become a global health issue. The sudden emergence of COVID-19 has been accompanied by numerous uncertainties about its impact in many perspectives. One of major challenges is understanding the underlying mechanisms in the spread of this outbreak. COVID-19 is spread similar to the majority of infectious diseases through transmission via relatively large respiratory droplets. The awareness of the dispersal of these droplets is crucial in not only improving methods for controlling the dispersion of COVID-19 droplets, but also in discovering fundamental mechanisms of its transmission. In this study, a numerical model is developed to study the motion of droplets expelled through the respiratory system. Based on the source of these droplets, different sizes of droplets such as large ones and aerosols, which behave differently in the environment, can be generated. In this regard, diverse sources of droplets, namely breathing, coughing, and sneezing, are considered in this analysis. Besides, the time for a single droplet to fall from a height of 1.8 m is also obtained. The results reveal that the traditional distances suggested by different sources for keeping the social distance are not enough, which is linked to different nature of the droplet generation.
|
|
| 5. |
- Abbasiasl, Taher, et al.
(författare)
-
A Flexible Cystoscope Based on Hydrodynamic Cavitation for Tumor Tissue Ablation
- 2022
-
Ingår i: IEEE Transactions on Biomedical Engineering. - : Institute of Electrical and Electronics Engineers (IEEE). - 0018-9294 .- 1558-2531. ; 69:1, s. 513-524
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: Hydrodynamic cavitation is characterized by the formation of bubbles inside a flow due to local reduction of pressure below the saturation vapor pressure. The resulting growth and violent collapse of bubbles lead to a huge amount of released energy. This energy can be implemented in different fields such as heat transfer enhancement, wastewater treatment and chemical reactions. In this study, a cystoscope based on small scale hydrodynamic cavitation was designed and fabricated to exploit the destructive energy of cavitation bubbles for treatment of tumor tissues. The developed device is equipped with a control system, which regulates the movement of the cystoscope in different directions. According to our experiments, the fabricated cystoscope was able to locate the target and expose cavitating flow to the target continuously and accurately. The designed cavitation probe embedded into the cystoscope caused a significant damage to prostate cancer and bladder cancer tissues within less than 15 minutes. The results of our experiments showed that the cavitation probe could be easily coupled with endoscopic devices because of its small diameter. We successfully integrated a biomedical camera, a suction tube, tendon cables, and the cavitation probe into a 6.7 mm diameter cystoscope, which could be controlled smoothly and accurately via a control system. The developed device is considered as a mechanical ablation therapy, can be a solid alternative for minimally invasive tissue ablation methods such as radiofrequency (RF) and laser ablation, and could have lower side effects compared to ultrasound therapy and cryoablation.
|
|
| 6. |
- Abbasiasl, Taher, et al.
(författare)
-
Effect of intensified cavitation using poly (vinyl alcohol) microbubbles on spray atomization characteristics in microscale
- 2020
-
Ingår i: AIP Advances. - : American Institute of Physics (AIP). - 2158-3226. ; 10:2
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, cavitating flows inside a transparent cylindrical nozzle with an inner diameter of 0.9 mm were visualized, and the effect of cavitation on atomization characteristics of emerging sprays was investigated. Different patterns of cavitating flows inside the nozzle were visualized using a high-speed camera. In-house codes were developed to process the captured images to study the droplet size distribution and droplet velocity in different flow regimes. The results show that cavitating flows at the microscale have significant effects on atomization characteristics of the spray. Two working fluids, namely, water and poly(vinyl alcohol) microbubble (PVA MB) suspension, were employed. Accordingly, the injection pressures were detected as 690 kPa, 1035 kPa, and 1725 kPa for cavitation inception, supercavitation, and hydraulic flip flow regimes in the case of water, respectively. The corresponding pressures for the aforementioned patterns for PVA MB suspension were 590 kPa, 760 kPa, and 1070 kPa, respectively. At the microscale, as a result of a higher volume fraction of cavitation bubbles inside the nozzle, there is no large difference between the cavitation numbers corresponding to cavitating and hydraulic flip flows. Although the percentage of droplets with diameters smaller than 200 μm was roughly the same for both cases of water and PVA MB suspension, the Sauter mean diameter was considerably lower in the case of PVA MBs. Moreover, higher droplet velocities were achieved in the case of PVA MBs at lower injection pressures.
|
|
| 7. |
- Aghdam, Araz Sheibani, et al.
(författare)
-
A New Method for Intense Cavitation Bubble Generation on Layer-by-Layer Assembled SLIPS
- 2019
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- The importance of surface topology for the generation of cavitating flows in micro scale has been emphasized during the last decade. In this regard, the utilization of surface roughness elements is not only beneficial in promoting mass transportation mechanisms, but also in improving the surface characteristics by offering new interacting surface areas. Therefore, it is possible to increase the performance of microfluidic systems involving multiphase flows via modifying the surface. In this study, we aim to enhance generation and intensification of cavitating flows inside microfluidic devices by developing artificial roughness elements and trapping hydrophobic fluorinated lubricants. For this, we employed different microfluidic devices with various hydraulic diameters, while roughness structures with different lengths were formed on the side walls of microchannel configurations. The surface roughness of these devices was developed by assembling various sizes of silica nanoparticles using the layer-by-layer technique (D2). In addition, to compare the cavitating flow intensity with regular devices having plain surfaces (D1), highly fluorinated oil was trapped within the pores of the existing thin films in the configuration D2 via providing the Slippery Liquid-Infused Porous Surface (D3). The microfluidic devices housing the short microchannel and the extended channel were exposed to upstream pressures varying from 1 to 7.23 MPa. Cavitation inception and supercavitation condition occured at much lower upstream pressures for the configurations of D2 and D3. Interestingly, hydraulic flip, which rarely appears in the conventional conical nozzles at high pressures, was observed at moderate upstream pressures for the configuration D2 proving the air passage existence along one side of the channel wall.
|
|
| 8. |
- Amin, Kawa, et al.
(författare)
-
Evidence for eosinophil and IL-17 mediated inflammation in allergic rhinitis
- 2020
-
Ingår i: Clinical and Molecular Allergy. - : Springer Science and Business Media LLC. - 1476-7961. ; 18
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The aim was to determine the level of inflammatory cytokines, eosinophil cationic protein and IgE in allergic rhinitis (AR) patients.Subjects and methods: Blood samples were taken from 88 AR patients and 88 healthy controls (HC). Each sample was analysed for eosinophil counts by flow cytometry, IgE by ECLIA, ECP, IL-17, and IL-33 by using ELISA test.Results: There was no significant difference between AR patients and the control group in age and gender. Levels of eosinophils, IgE, ECP, IL-17, IL-33 and the total symptom scores were significantly higher in AR patients than the HC (P = 0.0001). Serum ECP correlated with IL-17 (P = 0.041, r = 0.42), IL-33 (P = 0.0001, r = 080), and IgE levels (P = 0.017, r = 0.45) in the R patients. There was no correlation between IL-17 and IL-33. There was a correlation between symptom scores and eosinophils (P = 0.026, r = 0.52), and IgE (P = 0.001, r = 0.60) in the patients. No correlation was observed between symptom scores and ECP, IL-17, and IL-33 in the AR patient.Conclusions: Patients with AR have significant higher serum levels of ECP, IL-17, and IL-33 than healthy controls. This indicates that these markers could be used to in order to diagnose AR and to monitor disease. Inhibitory molecules to IL-17 and IL-33 may be considered as novel treatment strategies.
|
|
| 9. |
- Amin, Kawa, et al.
(författare)
-
Hepatic Immune Response to Environmental Carcinogens
- 2018
-
Ingår i: Pharmacognosy Magazine. - : EManuscript Technologies. - 0973-1296 .- 0976-4062. ; 14:58, s. 548-553
-
Tidskriftsartikel (refereegranskat)abstract
- Aim: Environmental carcinogenic substances contribute to increasing incidence of hepatocellular carcinoma (HCC). We employed a sensitive method for the detection of DNA damage combined with analysis of the immune response to gain better knowledge how environmental carcinogens mediate pathology.Materials and Methods: Rat hepatocytes were isolated and stimulated with carcinogenic substances for the assessment of DNA damage. The mycotoxin aflatoxin B-1 (AFB(1)), two heterocyclic amines from the cooking of meat amino-3-methylimidazo[4,5-f] quinoline (IQ) and 3-amino-1-methyl-5H-pyr ido-(4,3-b)-indole (TRP-P-2), and protein extract from the fungus Lactarius necator were assayed. Unscheduled DNA synthesis in hepatocytes was measured by the incorporation of radioactive thymidine during DNA repair. Stimulation of hepatocyte/immune cell preparation with the substances and measurement of IFN gamma release at different time points determined their ability to induce an inflammatory response.Results: DNA repair in the hepatocytes was induced in response to 10(-7) M AFB(1) and 10(-9) M IQ. TRP-P-2 did not induce DNA repair; however, at 10(-4) M, the fungus extract did this. Furthermore, liver-resident immune cells responded with differential production of IFN gamma over time in response to stimulation by all the carcinogens, with AFB(1) being the most potent. TRP-P-2 showed the most significant reduction in IFN gamma response over time.Conclusion: DNA damage in hepatocytes induced by environmental substances was detected at low molecular concentrations. The system did provide novel evidence for hepatic carcinogenicity by the fungus L. necator. Analysis of the response by liver-resident immune cells to the substances suggested that highly mutagenic substances induce prolonged inflammatory response.
|
|
| 10. |
- Gevari, Moein Talebian, et al.
(författare)
-
Deagglomeration of nanoparticle clusters in a "cavitation on chip" device
- 2020
-
Ingår i: AIP Advances. - : AIP Publishing. - 2158-3226. ; 10:11
-
Tidskriftsartikel (refereegranskat)abstract
- Due to the potential of significant energy release in cavitating flows, early cavitation inception and intensification of cavitating flows are of great importance. To use this potential, we investigated the deagglomeration of nanoparticle clusters with the implementation of hydrodynamic cavitation in a microfluidic device. For this purpose, a microfluidic device with a micro-orifice geometry was designed and fabricated using standard microfabrication processes. The system was tested with distilled water in the assembled experimental setup. The flow patterns were characterized using the cavitation number and inlet pressure. Titania nanoparticles were utilized to prepare nanoparticle suspensions. The suspensions were heated to allow agglomeration of nanoparticles. The system was operated with the new working fluid (nanoparticle clusters) at different inlet pressures. After characterizing flow patterns, the flow patterns were compared with those of pure water. The deagglomeration effects of hydrodynamic cavitation on nanoparticle clusters showed the possibility to apply this method for the stabilization of nanoparticles, which paves way to the implementation of nanoparticle suspensions to thermal fluid systems for increased energy efficiency as well as to drug delivery. Our results also indicate that the presence of nanoparticles in the working fluid enhanced cavitation intensity due to the increase in the number of heterogeneous nucleation sites.
|
|
