| 1. |
- Lozano, Rafael, et al.
(författare)
-
Measuring progress from 1990 to 2017 and projecting attainment to 2030 of the health-related Sustainable Development Goals for 195 countries and territories: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - : Elsevier. - 1474-547X .- 0140-6736. ; 392:10159, s. 2091-2138
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Efforts to establish the 2015 baseline and monitor early implementation of the UN Sustainable Development Goals (SDGs) highlight both great potential for and threats to improving health by 2030. To fully deliver on the SDG aim of “leaving no one behind”, it is increasingly important to examine the health-related SDGs beyond national-level estimates. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD 2017), we measured progress on 41 of 52 health-related SDG indicators and estimated the health-related SDG index for 195 countries and territories for the period 1990–2017, projected indicators to 2030, and analysed global attainment. Methods: We measured progress on 41 health-related SDG indicators from 1990 to 2017, an increase of four indicators since GBD 2016 (new indicators were health worker density, sexual violence by non-intimate partners, population census status, and prevalence of physical and sexual violence [reported separately]). We also improved the measurement of several previously reported indicators. We constructed national-level estimates and, for a subset of health-related SDGs, examined indicator-level differences by sex and Socio-demographic Index (SDI) quintile. We also did subnational assessments of performance for selected countries. To construct the health-related SDG index, we transformed the value for each indicator on a scale of 0–100, with 0 as the 2·5th percentile and 100 as the 97·5th percentile of 1000 draws calculated from 1990 to 2030, and took the geometric mean of the scaled indicators by target. To generate projections through 2030, we used a forecasting framework that drew estimates from the broader GBD study and used weighted averages of indicator-specific and country-specific annualised rates of change from 1990 to 2017 to inform future estimates. We assessed attainment of indicators with defined targets in two ways: first, using mean values projected for 2030, and then using the probability of attainment in 2030 calculated from 1000 draws. We also did a global attainment analysis of the feasibility of attaining SDG targets on the basis of past trends. Using 2015 global averages of indicators with defined SDG targets, we calculated the global annualised rates of change required from 2015 to 2030 to meet these targets, and then identified in what percentiles the required global annualised rates of change fell in the distribution of country-level rates of change from 1990 to 2015. We took the mean of these global percentile values across indicators and applied the past rate of change at this mean global percentile to all health-related SDG indicators, irrespective of target definition, to estimate the equivalent 2030 global average value and percentage change from 2015 to 2030 for each indicator. Findings: The global median health-related SDG index in 2017 was 59·4 (IQR 35·4–67·3), ranging from a low of 11·6 (95% uncertainty interval 9·6–14·0) to a high of 84·9 (83·1–86·7). SDG index values in countries assessed at the subnational level varied substantially, particularly in China and India, although scores in Japan and the UK were more homogeneous. Indicators also varied by SDI quintile and sex, with males having worse outcomes than females for non-communicable disease (NCD) mortality, alcohol use, and smoking, among others. Most countries were projected to have a higher health-related SDG index in 2030 than in 2017, while country-level probabilities of attainment by 2030 varied widely by indicator. Under-5 mortality, neonatal mortality, maternal mortality ratio, and malaria indicators had the most countries with at least 95% probability of target attainment. Other indicators, including NCD mortality and suicide mortality, had no countries projected to meet corresponding SDG targets on the basis of projected mean values for 2030 but showed some probability of attainment by 2030. For some indicators, including child malnutrition, several infectious diseases, and most violence measures, the annualised rates of change required to meet SDG targets far exceeded the pace of progress achieved by any country in the recent past. We found that applying the mean global annualised rate of change to indicators without defined targets would equate to about 19% and 22% reductions in global smoking and alcohol consumption, respectively; a 47% decline in adolescent birth rates; and a more than 85% increase in health worker density per 1000 population by 2030. Interpretation: The GBD study offers a unique, robust platform for monitoring the health-related SDGs across demographic and geographic dimensions. Our findings underscore the importance of increased collection and analysis of disaggregated data and highlight where more deliberate design or targeting of interventions could accelerate progress in attaining the SDGs. Current projections show that many health-related SDG indicators, NCDs, NCD-related risks, and violence-related indicators will require a concerted shift away from what might have driven past gains—curative interventions in the case of NCDs—towards multisectoral, prevention-oriented policy action and investments to achieve SDG aims. Notably, several targets, if they are to be met by 2030, demand a pace of progress that no country has achieved in the recent past. The future is fundamentally uncertain, and no model can fully predict what breakthroughs or events might alter the course of the SDGs. What is clear is that our actions—or inaction—today will ultimately dictate how close the world, collectively, can get to leaving no one behind by 2030.
|
|
| 2. |
- Alizadeh, Mahmoud, et al.
(författare)
-
A new Block-Structure Modeling Technique for RF Power Amplifiers in a 2×2 MIMO System
- 2017
-
Ingår i: 2017 13th International Conference on Advanced Technologies, Systems and Services in Telecommunications, TELSIKS 2017 - Proceeding. - Nis, Serbia : IEEE. - 9781538618004 ; , s. 224-227
-
Konferensbidrag (refereegranskat)abstract
- A new block-structure behavioral model is proposed for radio frequency power amplifiers in a 2×2 multiple-input multiple-output system including input cross-talk. The proposed model forms kernels of blocks of different nonlinear order that correspond to the significant frequency response of measured frequency domain Volterra kernels. The model can therefore well describe the input-output relationships of the nonlinear dynamic behavior of PAs. The proposed model outperforms conventional models in terms of model errors.
|
|
| 3. |
- Alizadeh, Mahmoud, et al.
(författare)
-
A two-tone test for characterizing nonlinear dynamic effects of radio frequency amplifiers in different amplitude regions
- 2016
-
Ingår i: Measurement. - : Elsevier BV. - 0263-2241 .- 1873-412X. ; 89, s. 273-279
-
Tidskriftsartikel (refereegranskat)abstract
- A new two-tone test method for radio frequency power amplifiers is presented. The test signal is a two-tone probing-signal superimposed on large-signals of different amplitude. The amplifier is, thus, excited in different amplitude regions. The amplitude and phase of the 3rd order intermodulation (IM) products are measured vs. frequency spacing and probing-signal amplitude in each region. The IM magnitude is a measure of the nonlinearity, while the frequency dependence and asymmetry are measures of the memory effects in the different regions. A Doherty and a class-AB amplifier were tested. For both amplifiers the IM magnitude increased by ∼15 dB from the lowest to the highest amplitude region. For the Doherty amplifier the behavior of the IM products vs. frequency spacing was similar in all regions, indicating similar memory effects. For the class-AB amplifier the IM vs. frequency spacing was significantly different in the different regions, which indicates different memory effects.
|
|
| 4. |
- Alizadeh, Mahmoud, et al.
(författare)
-
Basis Function Decomposition Approach in Piece-Wise Modeling for RF Power Amplifiers
- 2018
-
Ingår i: 6th Telecommunications forum TELFOR 2018. - Belgrade, Serbia : Telecommunications society. - 9781538671719 - 9781538671726 - 9781538671702
-
Konferensbidrag (refereegranskat)abstract
- In this paper, a new approach is proposed to decompose the basis functions in a piece-wise modeling technique for nonlinear radio frequency (RF) power amplifiers. The proposed technique treats the discontinuity problem of the model output at the joint points between different operating points, whereas preserves the linear and nonlinear properties of the original model within each region. Experimental results show that the proposed technique outperforms the conventional piece-wise model in terms of model errors.
|
|
| 5. |
- Alizadeh, Mahmoud, et al.
(författare)
-
Behavioral modeling and digital pre-distortion techniques for RF PAs in a 3 x 3 MIMO system
- 2019
-
Ingår i: International journal of microwave and wireless technologies. - : Cambridge University Press. - 1759-0795 .- 1759-0787. ; 11:10, s. 989-999
-
Tidskriftsartikel (refereegranskat)abstract
- Modern telecommunications are moving towards (massive) multi-input multi-output (MIMO) systems in 5th generation (5G) technology, increasing the dimensionality of the systems dramatically. In this paper, the impairments of radio frequency (RF) power amplifiers (PAs) in a 3 x 3 MIMO system are compensated in both the time and the frequency domains. A three-dimensional (3D) time-domain memory polynomial-type model is proposed as an extension of conventional 2D models. Furthermore, a 3D frequency-domain technique is formulated based on the proposed time-domain model to reduce the dimensionality of the model, while preserving the performance in terms of model errors. In the 3D frequency-domain technique, the bandwidth of the system is split into several narrow sub-bands, and the parameters of the model are estimated for each sub-band. This approach requires less computational complexity, and also the procedure of the parameters estimation for each sub-band can be implemented independently. The device-under-test consists of three RF PAs including input and output cross-talk channels. The proposed techniques are evaluated in both behavioral modeling and digital pre-distortion (DPD) perspectives. The experimental results show that the proposed DPD technique can compensate the errors of non-linearity and memory effects in the both time and frequency domains.
|
|
| 6. |
- Alizadeh, Mahmoud, et al.
(författare)
-
Behavioural modelling and digital pre-distortion techniques for RF PAs in a 3x3 MIMO system
- 2018
-
Ingår i: International journal of microwave and wireless technologies. - 1759-0795 .- 1759-0787.
-
Tidskriftsartikel (refereegranskat)abstract
- Modern telecommunications are moving towards (massive) multi-input multi-output systems in 5th generation (5G) technology, increasing the dimensionality of the system dramatically. In this paper, the impairments of radio frequency (RF)power amplifiers (PAs) in a 3x3 MIMO system are compensated in both time and frequency domains. A three-dimensional(3D) time-domain memory polynomial-type model is proposed as an extension of conventional 2D models. Furthermore, a 3D frequency-domain technique is formulated based on the proposed time-domain model to reduce the dimensionality of the model, while preserving the performance in terms of model errors. In the 3D frequency-domain technique, the bandwidth of a system is split into several narrow sub-bands, and the parameters of the system are estimated for each subband. This approach requires less computational complexity, and also the procedure of the parameters estimation for each sub-band can be implemented independently. The device-under-test (DUT) consists of three RF PAs including input and output cross-talk channels. The proposed techniques are evaluated in both behavioural modelling and digital pre-distortion(DPD) perspectives. The results show that the proposed DPD technique can compensate the errors of non-linearity and memory effects by about 23.5 dB and 7 dB in terms of the normalized mean square error and adjacent channel leakage ratio, respectively.
|
|
| 7. |
- Alizadeh, Mahmoud
(författare)
-
Characterisation, Modelling and Digital Pre-DistortionTechniques for RF Transmitters in Wireless Systems
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Wireless systems have become an inevitable part of modern technologies serving humankind. The rapid growth towards large dimensional systems, e.g. 5th generation (5G) technologies, incurs needs for improving the performance of the systems and considering aspects to make them as far as possible environmentally friendly in terms of power efficiency, cost, and so on. One of the key parts of every wireless communication system is the radio frequency (RF) power amplifier (PA), which consumes the largest percentage of the total energy. Hence, accurate models of RF PAs can be used to optimize their design and to compensate for signal distortions. This thesis starts with two methods for frequency-domain characterisation to analyse the dynamic behaviour of PAs in 3rd-order non-linear systems. Firstly, two-tone signals superimposed on large-signals are used to analyse the frequency-domain symmetry properties of inter-modulation (IM) distortions and Volterra kernels in different dynamic regions of RF PAs in a single-input single-output (SISO) system. Secondly, three-tone signals are used to characterise the 3rd-order self- and cross-Volterra kernels of RF PAs in a 3 × 3 multiple-input multiple-output (MIMO) system. The main block structures of the models are determined by analysing the frequency-domain symmetry properties of the Volterra kernels in different three-dimensional (3D) frequency spaces. This approach significantly simplifies the structure of the 3rd-order non-linear MIMO model.The following parts of the thesis investigate techniques for behavioural modelling and linearising RF PAs. A piece-wise modelling technique is proposed to characterise the dynamic behaviour and to mitigate the impairments of non-linear RF PAs at different operating points (regions). A set of thresholds decompose the input signal into several sub-signals that drive the RF PAs at different operating points. At each operating point, the PAs are modelled by one sub-model, and hence, the complete model consists of several sub-models. The proposed technique reduces the model errors compared to conventional piece-wise modelling techniques.A block structure modelling technique is proposed for RF PAs in a MIMO system based on the results of the three-tone characterisation technique. The main structures of the 3rd- and higher-order systems are formulated based on the frequency dependence of each block. Hence, the model can describe more relevant interconnections between the inputs and outputs than conventional polynomial-type models.This thesis studies the behavioural modelling and compensation techniques in both the time and the frequency domains for RF PAs in a 3 × 3MIMO system. The 3D time-domain technique is an extension of conventional 2D generalised memory polynomial (GMP) techniques. To reduce the computational complexity, a frequency-domain technique is proposed that is efficient and feasible for systems with long memory effects. In this technique, the parameters of the model are estimated within narrow sub-bands. Each sub-band requires only a few parameters, and hence the size of the model for each sub-band is reduced.
|
|
| 8. |
- Alizadeh, Mahmoud, et al.
(författare)
-
Characterization of Volterra Kernels for RF Power Amplifiers Using a Two-Tone Signal and a Large-Signal
- 2018
-
Ingår i: 2018 International Conference on Communications, COMM 2018 - Proceedings. - : Institute of Electrical and Electronics Engineers (IEEE). - 9781538623510 - 9781538623503 - 9781538623497 ; , s. 351-356
-
Konferensbidrag (refereegranskat)abstract
- The 3rd-order Volterra kernels of a radio frequency (RF) power amplifier (PA) are characterized using a large-signal and a two-tone probing-signal. In this technique, the magnitude and phase asymmetries of the kernels of the PA excited by the probing-signal are analyzed in different amplitude regions of the large-signal. The device under test is a class-AB PA operating at 2.14 GHz. The maximum sweeping frequency space of the probing-signal is 20 MHz. The results indicate that the Volterra kernels of the PA show different behaviors (frequency dependency and asymmetry) in different regions.
|
|
| 9. |
- Alizadeh, Mahmoud, et al.
(författare)
-
Measurement and Analysis of Frequency-Domain Volterra Kernels of Nonlinear Dynamic 3 x 3 MIMO Systems
- 2017
-
Ingår i: IEEE Transactions on Instrumentation and Measurement. - : IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. - 0018-9456 .- 1557-9662. ; 66:7, s. 1893-1905
-
Tidskriftsartikel (refereegranskat)abstract
- Multiple-input multiple-output (MIMO) frequencydomain Volterra kernels of nonlinear order 3 are experimentally determined in bandwidth-limited frequency regions. How the effect of higher nonlinear orders can be reduced and how this affects the estimated errors are discussed. The magnitude and the phase of the kernels are Kramers-Kronig consistent. The self-kernels and cross-kernels have different symmetries, and the kernels are therefore determined and analyzed in different regions in the 3-D frequency space. By analyzing the properties along certain paths in the 3-D frequency space, the block structures for the respective kernels are determined. These block structures contain the significant blocks of the general block structures for the third-order kernels. The device under test is an MIMO transmitter for radio frequency signals.
|
|
| 10. |
- Alizadeh, Mahmoud, et al.
(författare)
-
Measurement and analysis of frequency-domainVolterra kernels of nonlinear dynamic 3x3 MIMO systems
- 2016
-
Ingår i: IEEE Transactions on Instrumentation and Measurement. - : IEEE Press. - 0018-9456 .- 1557-9662.
-
Tidskriftsartikel (refereegranskat)abstract
- Multiple-input multiple-output (MIMO) frequency-domain Volterra kernels of nonlinear order 3 are experimentally determined in bandwidth-limited frequency regions. How the effect of higher nonlinear orders can be reduced and how this affects the estimated errors are discussed. The magnitude and phase of the kernels areKramers-Kronig consistent. The self- and cross-kernels have different symmetries and the kernels are therefore determined and analyzed in different regions in the 3D frequency space. By analyzing the properties along certain paths in the 3D frequency space, the block structures for the respective kernels are determined. These block structures contain the significant blocks of the general block structures for third-order kernels. The device under test is a MIMO transmitter for radio frequency signals.
|
|
