| 1. |
- Lundgren, Fredrik, et al.
(författare)
-
PTFE bypass to below-knee arteries : distal vein collar or not? A prospective randomised multicentre study
- 2010
-
Ingår i: European Journal of Vascular and Endovascular Surgery. - : Elsevier BV. - 1078-5884 .- 1532-2165. ; 39:6, s. 747-754
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundPatency and limb salvage after synthetic bypass to the arteries below-knee are inferior to that which can be achieved with autologous vein. Use of a vein collar at the distal anastomosis has been suggested to improve patency and limb salvage, a problem that is analysed in this randomised clinical study.MethodsPatients with critical limb ischaemia undergoing polytetrafluoroethylene (PTFE) bypass to below-knee arteries were randomly either assigned a vein collar or not in two groups – bypass to the popliteal artery below-knee (femoro-popliteal below-knee (FemPopBK)) and more distal bypass (femoro-distal bypass (FemDist)). Follow-up was scheduled until amputation, death or at most 5 years, whichever event occurred first.ResultsIn the FemPopBK and in the FemDist groups, 115/202 and 72/150 were randomised to have a vein collar, respectively. Information was available for 345 of 352 randomised patients (98%).At 3 years, primary patency was 26% (95% confidence interval (CI) 18–38) with a vein collar and 43 (33–58) without a vein collar for femoro-popliteal bypass and 20 (11–38), and 17 (9–33) for femoro-distal bypass, respectively. The corresponding figures for limb salvage were 64 (54–75) and 61 (50–74) for femoro-popliteal bypass, and 59 (46–76) and 44 (32–61) for femoro-distal bypass with and without a vein collar, respectively. Log-rank-test for the whole Kaplan–Meier life table curve showed no statistically significant differences with or without vein collar primary patency: p = 0.0853, p = 0.228; secondary patency: p = 0.317, p = 0.280; limb salvage: p = 0.757, p = 0.187 for FemPopBK and FemDist, respectively. The use of a vein collar did not influence patency or limb salvage.ConclusionThis study failed to show any benefit for vein collar with PTFE bypass to a below-knee artery.
|
|
| 2. |
- Bagni, T., et al.
(författare)
-
Modeling Results of the Quench Behavior of a Nb-Ti Canted-Cosine-Theta Corrector Magnet for LHC
- 2024
-
Ingår i: IEEE transactions on applied superconductivity (Print). - : IEEE. - 1051-8223 .- 1558-2515. ; 34:5
-
Tidskriftsartikel (refereegranskat)abstract
- A newly designed superconducting magnet of the Canted-Cosine-Theta (CCT) type was developed as a result of a collaboration between Swedish universities (Uppsala and Linneaus) and Swedish industries. This magnet was designed to function as a replacement of the present LHC orbit corrector magnets, which are approaching their end of life due to the radiation load. As a result, the new CCT magnet was developed to be more radiation tolerant and to constitute a one-to-one replacement to the currently installed version, which is a 1 m long 70 mm double aperture dipole magnet. The final magnet, which is currently under construction, will be tested at FREIA laboratory at Uppsala University and generate a magnetic field of 3.3 T and an integrated field of 2.8 Tm at about 85 A. To examine the magnet quench behavior and to identify a suitable quench protection system, the 3D electro-magnetic and thermal behavior of the coil was modeled using the RAT-Raccoon software. Based on the simulation results, a Metrosil varistor was selected to protect the magnet during the test. In this article, we report the results of the numerical analysis. The magnet model is equipped with a spot heater to initialize the quench and the temperature and voltages are monitored during the avalanche effect. The simulated current decay and the hot-spot temperature are analyzed with a focus on the impact of quench-back on the magnet protection.
|
|
| 3. |
|
|
| 4. |
- Löfving, Malin, 1979-, et al.
(författare)
-
Design and Application of a Development Map for Aligning Strategy and Automation Decisions in Manufacturing SMEs
- 2023
-
Ingår i: Advances in Production Management Systems. - : Springer. - 9783031436611 - 9783031436628 ; 689 AICT, s. 228-241
-
Konferensbidrag (refereegranskat)abstract
- The research in this paper focused on (i) to increase the knowledge about the strategic role of automation technology and (ii) how automation technology investment decisions can be aligned with the strategy in manufacturing SMEs. This paper describes the design, application, and evaluation of the Strategic Development Map (SDM) in three settings, whereof two manufacturing SMEs. The SDM was also applied in more than 500 SMEs in a Swedish initiative called the Robot Lift. The SDM was derived from existing literature about Toyota management principles and thereafter adapted to the topic. The process of designing, testing, and evaluating the tool was inspired by design science research. It also contains explanations of the outcomes and mechanisms that lead to the successful adaptation and use of the SDM. The SDM provides a structured guidance process to understand the strategic role of automation technology investments in SMEs. This process can support companies towards a deeper understanding of the current state, target state and obstacles and challenges to reach the target with a focus on automation technology investments. The SDM was emphasized by companies and external coaches as very simple to understand and use. Using the SDM increased involvement and knowledge about strategic role of automation technology.
|
|
| 5. |
- Machado, Carla G., et al.
(författare)
-
Industry 4.0 readiness in manufacturing companies : Challenges and enablers towards increased digitalization
- 2019
-
Ingår i: Procedia CIRP. - : Elsevier. ; , s. 1113-1118, s. 1113-1118
-
Konferensbidrag (refereegranskat)abstract
- Digitalization is changing the business environment and companies face challenges to make progress. A first step to support companies is to verify their digital readiness, capabilities, and developing clear plans for improvement. This paper aims to evaluate the digital readiness of seven companies through the application of a self-check tool, followed by a deeper investigation through a case study, to identify reasons, challenges/barriers and enablers towards digitalization. A workshop was conducted to evaluate the use of a self-check tool and collect other analysis. Results include the readiness level and comparison between companies, actions and practices towards increased digitalization.
|
|
| 6. |
- Sladkevicius, Povilas, et al.
(författare)
-
Ultrasound dating at 12-14 weeks of gestation. A prospective cross-validation of established dating formulae in in-vitro fertilized pregnancies.
- 2005
-
Ingår i: Ultrasound in Obstetrics & Gynecology. - : Wiley. - 1469-0705 .- 0960-7692. ; 26:5, s. 504-511
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives To determine the accuracy of established ultrasound dating formulae when used at 12-14 weeks of gestation. Methods One-hundred and sixty-seven singleton pregnancies conceived after in-vitro fertilization (IVF) underwent a dating scan at 12-14 weeks of gestation. Gestational age at the dating scan was calculated by adding 14 days to the number of days between the date of oocyte retrieval and the date of the ultrasound scan. Gestational age according to oocyte retrieval was regarded as the true gestational age. True gestational age was compared to gestational age calculated on the basis of 21 dating formulae based on fetal crown-rump length (CRL) measurements and to three dating formulae based on fetal biparietal diameter (BPD) measurements. In a previous study the three BPD formulae tested here had been shown to be superior to four other BPD formulae when used at 12-14 weeks of gestation. The mean of the differences between estimated and true gestational age and their standard deviation (SD) were calculated for each formula. The SD of the differences was assumed to reflect random measurement error. Systematic measurement error was assumed to exist if zero lay outside the mean difference ± 2SE (SE: standard error of the mean). Results The three best CRL formulae were associated with mean (non-systematic) measurement errors of -0.0, -0.1 and -0.3 days, and the SD of the measurement errors of these formulae varied from 2.37 to 2.45. All but two of the remaining CRL formulae were associated with systematic over- or under-estimation of gestational age, and the SDs of their measurement error varied between 2.25 and 4.86 days. Dating formulae using BPD systematically underestimated gestational age by -0.4 to -0.7 days, and the SDs of their measurement errors varied from 1.86 to 2.09. Conclusions We have identified three BPD formulae that are suitable for dating at 12-14 weeks of gestation. They are superior to all 21 CRL formulae tested here, because their random measurement errors were much smaller than those of the three best CRL formulae. The small systematic negative measurement errors associated with the BPD formulae are likely to be clinically unimportant.
|
|
