| 1. |
- An, Hongbin, et al.
(författare)
-
A method of manufacturing microfluidic contact lenses by using irreversible bonding and thermoforming
- 2018
-
Ingår i: Journal of Micromechanics and Microengineering. - : IOP PUBLISHING LTD. - 0960-1317 .- 1361-6439. ; 28:10
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we present the development of microfluidic contact lenses, which is based on the advantages of wearable microfluidics and can have great potential in the ophthalmology healthcare field. The development consists of two parts; the manufacturing process and the usability tests of the devices. In the manufacturing process, we firstly extended silane coupling and surface modification to irreversibly bond plastic membranes with microchannel-molded silicone rubber, to form the plastic-PDMS plane assemblies, and then molded the plane into a contact lens by thermoforming. We systematically investigated the effects of thermoforming factors, heating temperatures and the terrace die's sphere radius on channels by using the factorial experiment design. In addition, various tests were conducted to verify the usability of the devices. Through blockage and leakage tests, the devices were proved to be feasible, with no channel-blockages and could stand high pressures. Through a wearing test, the contact lenses were confirmed to be harmless on the living body. Furthermore, by performing the manipulating test, the device was proved to be liquid-controllable. These works provide a foundation for the applications of microfluidic contact lenses in ophthalmology.
|
|
| 2. |
- An, Hongbin, et al.
(författare)
-
Microfluidic contact lenses for unpowered, continuous and non-invasive intraocular pressure monitoring
- 2019
-
Ingår i: Sensors and Actuators A-Physical. - : Elsevier BV. - 0924-4247 .- 1873-3069. ; 295, s. 177-187
-
Tidskriftsartikel (refereegranskat)abstract
- Intraocular pressure (IOP) is a crucial physiological indicator of the visual system and play a key role in the diagnosis and treatment of glaucoma. However, the current handheld single measurement tools for IOP sensing cannot meet the future demands for glaucoma management. Thus, here we present the microfluidic contact lens sensors that could provide unpowered, continuous and non-invasive IOP monitoring. The microfluidic contact lens is comprised of a sensing layer of the micropatterned soft-elastomer and a hard plastic reference layer. The devices use the annular sensing chamber filled with the dyed liquid and a sensing microchannel as the IOP transducer. Resulting from the volume variance of the sensing chamber and caused by the deformation of the sensing layer under pressure, the IOP signal is detected as the displacement change of the dyed liquid's interface in the sensing channel, and in which, the displacement change can be optically observed by using the smart-phone camera. Based on the silicone rubber model eyeball, the sensing mechanism of the devices with different design parameters (the position of the sensing chambers and the dimension of the sensing channels) are explored by using the theoretical analyses and experimental investigations. The characteristics of these microfluidic contact lens sensors are tested, in which, the maximum sensitivity of the device (with the sensing chamber of 8.5 mm in diameter and the sensing channel of 100 x 40 um in size) can be achieved to 0.708 mm/mmHg in a working range of 0 (4) over tilde0 mmHg. Also, cyclical tests were conducted and indicated that the devices had a good reversibility and Long-term stability. Furthermore, the device (with the sensing chamber of 5.0 mm in diameter and the sensing channel of 150 x 40 urn in size) was test on the porcine eyes ex vivo, showing a sensitivity of 0.2832 mm/mmHg in a range of 8 (3) over tilde2 mmHg and, the device had a good reproducibility to its IOP change. This work provides a promising approach for unpowered, continuous and non-invasive monitoring of IOP.
|
|
