| 1. |
- Ståhl, Jan Eric, et al.
(författare)
-
Key Performance Index for Creating an Integrated and Sustainable Academy - A University with the Ability to Meet Future Needs and Challenges Identified in Society and Industry
- 2024
-
Ingår i: Moving Integrated Product Development to Service Clouds in the Global Economy - Proceedings of the 21st ISPE Inc. International Conference on Concurrent Engineering, CE 2014. - 2352-7528 .- 2352-751X. - 9781643685113 - 9781643685106 ; 52, s. 643-659
-
Konferensbidrag (refereegranskat)abstract
- Key performance indexes (KPIs) in various forms have always been used in one way or another in the production and processing of raw materials. The need for KPIs was accentuated with the advent of industrialism in the western world. The way and strategy of manufacturing industrial products has been divided into several so-called developmental transformations. Primarily after the depression of the 1930s and after the Second World War, a way of working and a basic view was gradually created that has resource efficiency and goal achievement as a fundamental idea. This publication describes how KPIs can be used in higher education to create a sustainable academy to meet challenges in industry and society over time. This with a focus on sustainability and continuity as well as a strategic integration between the academy's various missions. These missions consist of teaching, research and collaboration. Furthermore, according to the Higher Education Ordinance, teaching shall rest on a scientific basis and, when appointing senior positions, equal weight shall be attached to the merits that can be linked to teaching and research. In addition to teaching and research, collaboration must be conducted with the surrounding society. Society places increasing demands on the knowledge conveyed in teaching to harmonize with current needs and to prepare for future needs and challenges. A starting point for the publication is that needs and challenges can best be met through a conscious and strategic integration between the academy's various missions. Another aspect that is highlighted in this publication is the importance of strengthening the collaboration between basic subjects and more applied and industry-related subjects, which provides renewal in the applied subjects at the same time as the basic research can be utilized at a higher rate. In an industrial perspective, a more continuous TRL scale is obtained, which provides a more effective implementation of research results. A development path that strengthens the Academy's mission areas is the principle of affiliation of personnel from industry and other sectors of society and increased admission of industrial doctoral students and other external doctoral students. In order to monitor the development of the respective mission areas of academia and its integration, the use of KPIs will be addressed. A discussion of their benefits will be highlighted but also the associated difficulties, especially when conditions change. The conducted literature study shows that there are very few or rather no found publications dealing with KPIs for the integration of the Academy's different missions. KPIs are well developed for higher education in terms of its implementation and associated economics. Corresponding published work related to KPIs in research deals primarily with conventional academic bibliometrics.
|
|
| 2. |
|
|
| 3. |
- Hambäck, Peter A., et al.
(författare)
-
Insekter och spindlar i anlagda våtmarker : Intressanta fynd från en systematisk undersökning i Uppland och södra Halland
- 2022
-
Ingår i: Entomologisk tidskrift. - 0013-886X. ; 143:1-2, s. 47-66
-
Tidskriftsartikel (refereegranskat)abstract
- Wetland area has decreased dramatically compared with preindustrial times, and in manyagricultural areas almost all wetlands have been drained to gain cropland. The trend hasin recent years been reversed because society has realized the many benefits of wetlandfunctions, such as for nutrient retention and flood control. In this study we inventoried 75 wetlands in Uppland and Halland for insects and spiders with Malaise traps, pitfall traps andsuction sampling. Most included wetlands are constructed, because the main purpose was toexamine if these wetlands also can be good for arthropod diversity, but we also included somemore natural wetlands as comparison. In total, we identified more than 25,000 individualsof more than 900 species of Coleoptera, Araneae, Diptera and Heteroptera. We found onenew species for Sweden, Hilara manicata Meigen 1822, and 37 new regional records. Alarge number of species found are considered threatened or else rare. Some wetlands closeto Mälaren were particularly interesting, with three species (Hypsosinga heri (Hahn 1831),Rhaphium antennatum (Charlier 1835) and Bagous robustus Brisout de Barneville 1863)that have no records nearby during recent times. These and other species found in the studyshow that constructed wetlands can provide good habitats for arthropod biodiversity andrare species, particularly if wetland shores are grazed and trampled by cattle.
|
|
| 4. |
- Nilsson, Magnus, et al.
(författare)
-
A 9-band WCDMA/EDGE transceiver supporting HSPA evolution
- 2011
-
Ingår i: [Host publication title missing]. - 0193-6530. ; , s. 366-368
-
Konferensbidrag (refereegranskat)abstract
- The future of cellular radio ICs lies in the integration of an ever-increasing number of bands and channel bandwidths. This paper presents a transceiver together with the associated discrete front-end components. The transceiver supports 4 EDGE bands and 9 WCDMA bands (l-VI and Vlll-X), while the radio can be configured to simultaneously support the 4 EDGE bands and up to 5 WCDMA bands: 3 high bands (HB) and 2 low bands (LB). The RX is a SAW-less homodyne composed of a main RX and a diversity RX. To reduce package complexity with so many bands, we chose to minimize the number of ports by using single-ended RF interfaces for both RX and TX. This saves seve ral package pins, but requires careful attention to grounding. The main RX has 8 LNA ports and the diversity RX has 5, with some LNAs supporting multiple bands. On the TX side, 2 ports are used for all EDGE bands and 4 for the WCDMA bands.
|
|
| 5. |
|
|
| 6. |
- Sarlus, Zmar, 1984-, et al.
(författare)
-
Timing and origin of the host rocks to the Malmberget iron oxide-apatite deposit, Sweden
- 2020
-
Ingår i: Precambrian Research. - : Elsevier. - 0301-9268 .- 1872-7433. ; 342
-
Tidskriftsartikel (refereegranskat)abstract
- The northern Norrbotten region in Sweden hosts abundant iron-oxide apatite (IOA) deposits including Kiirunavaara, the type locality for Kiruna-type deposits, and Malmberget. Felsic and intermediate metavolcanic rocks hosting the Malmberget IOA deposit contain oscillatory zoned zircon which yield magmatic U-Pb SIMS ages of 1885±6 Ma and 1881±6 Ma, respectively. Metamorphic rims on zircon from these rocks yield 1797±7 Ma and 1775±6 Ma, respectively, and record the age of the latest Svecofennian regional metamorphic event in the Gällivare area, tentatively interpreted as regional contact metamorphism. Two granite dikes that cut the ore yield U-Pb zircon emplacement ages of 1790±6 Ma and 1791±7 Ma, respectively, overlapping with the metamorphic overgrowths, and set a lower age limit for ore formation in the Malmberget IOA deposit. Rocks hosting the Malmberget IOA deposit have an alkalic to alkali-calcic affinity with a geochemical signature that favors a continental-arc, transitional to extensional setting. These rocks are suggested to have been generated in a back-arc region, in response to subduction beneath the craton margin retreating to the SW or W. The obtained ages and geochemical signatures of these rocks coincide well with the regionally defined Kiirunavaara group rocks, hosting several other IOA deposits in northern Sweden.
|
|
| 7. |
- Sarlus, Zmar, et al.
(författare)
-
Timing of plutonism in the Gällivare area : mplications for Proterozoic crustal development in the northern Norrbotten ore district, Sweden
- 2018
-
Ingår i: Geological Magazine. - : Cambridge University Press. - 0016-7568 .- 1469-5081. ; 155:6, s. 1351-1376
-
Tidskriftsartikel (refereegranskat)abstract
- Zircon ion probe (secondary-ion mass spectrometry or SIMS) data from a set of intrusive rocks emplaced in the vicinity of major ore bodies, as well as from large igneous intrusions in the Gällivare area, gave the following results: (1) the Dundret ultramafic–mafic layered complex (1883±5 Ma), the Aitik granite (1883±5 Ma), the Nautanen diorite (1870±12 Ma), the Vassaravaara ultramafic–mafic layered complex (1798±4 Ma), the Aitik dolerite (1813±9 Ma), the Bergmästergruvan and Sikträsk syenites (1795±4 Ma and 1801±3 Ma, respectively) and the Naalojärvi granite (1782±5 Ma). These data broadly fall within the ranges 1.89–1.87 Ga (early Svecofennian) and 1.80–1.78 Ga (late Svecofennian), but geochronologically allow further subdivision into pulses at 1885–1880, 1875–1870, 1800 and 1780 Ma. During these events, large layered ultramafic–mafic and felsic plutonic rocks were generated with distinct overlap in time suggesting coeval felsic–mafic magmatism. Results also indicate the presence of inherited c. 1.87 Ga zircon crystals in the plutonic rocks at 1.78 Ga, supporting reworking of the previous crust. These data indicate the importance of mantle-derived mafic underplating in the process of crustal magma generation in the region. The c. 1.88 Ga event that generated ultramafic–mafic layered complexes is tentatively suggested to have played an important role in the formation of the Aitik Cu–Au porphyry system. The later event at c. 1.80 Ga, generating voluminous mafic–felsic units, is suggested to be coupled to the regional iron-oxide-copper-gold (IOCG) overprint.
|
|
| 8. |
- Adegoke, Olutayo, 1979-, et al.
(författare)
-
Influence of laser powder bed fusion process parameters on the microstructure and cracking susceptibility of nickel-based superalloy Alloy 247LC
- 2022
-
Ingår i: Results in Materials. - : Elsevier. - 2590-048X. ; 13
-
Tidskriftsartikel (refereegranskat)abstract
- Microstructures of material conditions of nickel-based superalloy Alloy 247LC fabricated using laser powder bed fusion (L-PBF) were investigated. Experiments designed in a prior study revealed the L-PBF process parameters for which the material conditions displayed a reduced susceptibility to cracking. Certain process parameters produced material conditions with an increased susceptibility to cracking. In this study, the material conditions were investigated in detail to reveal their microstructure and to determine the cause of cracking. The reason for the transition between a reduced to an increased susceptibility to cracking was examined. The results revealed solidification cracking occurred at high-angle grain boundaries. Solidification cracking may have been promoted at high-angle grain boundaries because of the undercooling contribution of the grain boundary energy. Furthermore, Si segregation was observed in the cracks. Thus, the presence of Si most likely promoted solidification cracking. It was observed that a high crack density, which occurred in the high energy density material condition, was associated with a large average grain size. The fact that certain combination of process parameters produced microstructures with a low susceptibility to cracking, indicates that reliable Alloy 247LC material may be printed using L-PBF by employing improved process parameters. © 2022
|
|
| 9. |
- Adegoke, Olutayo, 1979-, et al.
(författare)
-
Influence of laser powder bed fusion process parameters on the microstructure of solution heat-treated nickel-based superalloy Alloy 247LC
- 2022
-
Ingår i: Materials Characterization. - : Elsevier. - 1044-5803 .- 1873-4189. ; 183
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, Alloy 247LC samples were built with different laser powder bed fusion (L-PBF) process parameters. The samples were then subjected to solution heat treatment at 1260 °C for 2 h. The grain size of all the samples increased significantly after the heat treatment. The relationship between the process parameters and grain size of the samples was investigated by performing a design of experiment analysis. The results indicated that the laser power was the most significant process parameter that influenced the grain height and aspect ratio. The laser power also significantly influenced the grain width. The as-built and as-built + heat-treated samples with high, medium, and low energy densities were characterized using a field emission gun scanning electron microscope equipped with an electron backscatter diffraction detector. The micrographs revealed that the cells present in the as-built samples disappeared after the heat treatment. Isolated cases of twinning were observed in the grains of the as-built + heat-treated samples. The disappearance of cells, increase in the grain size, and appearance of twins suggested that recrystallization occurred in the alloy after the heat treatment. The occurrence of recrystallization was confirmed by analyzing the grain orientation spread of the alloy, which was lower and more predominantly <1° in the as-built + heat-treated conditions than in the as-built conditions. The microhardness of the as-built + heat-treated samples were high which was plausible because γ’ precipitates were observed in the samples. However, the L-PBF process parameters had a very low correlation with the microhardness of the as-built + heat-treated samples.
|
|
| 10. |
- Adegoke, Olutayo, et al.
(författare)
-
Influence of laser powder bed fusion process parameters on voids, cracks, and microhardness of nickel-based superalloy alloy 247LC
- 2020
-
Ingår i: Materials. - 1996-1944. ; 13:17
-
Tidskriftsartikel (refereegranskat)abstract
- The manufacturing of parts from nickel-based superalloy Alloy 247LC by laser powder bed fusion (L-PBF) is challenging, primarily owing to the alloy’s susceptibility to cracks. Apart from the cracks, voids created during the L-PBF process should also be minimized to produce dense parts. In this study, samples of Alloy 247LC were manufactured by L-PBF, several of which could be produced with voids and crack density close to zero. A statistical design of experiments was used to evaluate the influence of the process parameters, namely laser power, scanning speed, and hatch distance (inherent to the volumetric energy density) on void formation, crack density, and microhardness of the samples. The window of process parameters, in which minimum voids and/or cracks were present, was predicted. It was shown that the void content increased steeply at a volumetric energy density threshold below 81 J/mm3. The crack density, on the other hand, increased steeply at a volumetric energy density threshold above 163 J/mm3. The microhardness displayed a relatively low value in three samples which displayed the lowest volumetric energy density and highest void content. It was also observed that two samples, which displayed the highest volumetric energy density and crack density, demonstrated a relatively high microhardness; which could be a vital evidence in future investigations to determine the fundamental mechanism of cracking. The laser power was concluded to be the strongest and statistically most significant process parameter that influenced void formation and microhardness. The interaction of laser power and hatch distance was the strongest and most significant factor that influenced the crack density. © 2020 by the authors.
|
|
