| 1. |
- Satizabal, Claudia L., et al.
(författare)
-
Genetic architecture of subcortical brain structures in 38,851 individuals
- 2019
-
Ingår i: Nature Genetics. - : Nature Publishing Group. - 1061-4036 .- 1546-1718. ; 51:11, s. 1624-
-
Tidskriftsartikel (refereegranskat)abstract
- Subcortical brain structures are integral to motion, consciousness, emotions and learning. We identified common genetic variation related to the volumes of the nucleus accumbens, amygdala, brainstem, caudate nucleus, globus pallidus, putamen and thalamus, using genome-wide association analyses in almost 40,000 individuals from CHARGE, ENIGMA and UK Biobank. We show that variability in subcortical volumes is heritable, and identify 48 significantly associated loci (40 novel at the time of analysis). Annotation of these loci by utilizing gene expression, methylation and neuropathological data identified 199 genes putatively implicated in neurodevelopment, synaptic signaling, axonal transport, apoptosis, inflammation/infection and susceptibility to neurological disorders. This set of genes is significantly enriched for Drosophila orthologs associated with neurodevelopmental phenotypes, suggesting evolutionarily conserved mechanisms. Our findings uncover novel biology and potential drug targets underlying brain development and disease.
|
|
| 2. |
- Andersson, Agneta, et al.
(författare)
-
DNA-streckkodning av marina växtplankton : Ett nytt verktyg i miljöövervakningen
- 2024
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Växtplankton utgör grunden i den marina näringsväven och används världen över för att bestämma miljöstatus i hav och sjöar. De ingår exempelvis som en kvalitetsfaktor i EU:s vattendirektiv och havsmiljödirektiv. Det finns långa tidsserier av växtplanktonövervakning där analyserna utförts med mikroskopi. Det sker nu en snabb internationell utveckling av DNA-metoder för att övervaka växtplankton. Målsättningen med detta projekt var att utveckla en praktisk och robust DNA analysmetod som kan implementeras i svensk marin miljöövervakning. Vårt tillvägagångssätt var att följa med på ordinarie marina miljöövervakningsexpeditioner under ett års tid (2019–2020) och ta parallella havsvattenprov för så kallad DNA-streckkodning av växtplankton. Sammanlagt tog vi prov vid 19 övervakningsstationer som var spridda från Bottenviken i norr till Skagerrak i söder. Provtagningsfrekvensen var cirka 1 gång per månad. Praktiska metoder utarbetades för fältprovtagning, DNA-extraktion, sekvensering, bioinformatisk analys och taxonomisk annotering. Vi har även tagit fram system för datahantering hos nationell datavärd och gett förslag på en ny datatyp för nationellt datavärdskap för marinbiologi och oceanografi vid Svenskt Oceanografiskt Datacentrum (https://sharkweb. smhi.se/hamta-data/). En viktig del har varit att jämföra resultaten av DNA-streckkodning och mikroskopi. Resultaten visar att DNA-streckkodning ger ungefär dubbelt så högt biodiversitetsmått än mikroskopering, även om det skiljer sig åt mellan olika grupper av växtplankton. För att undersöka om DNA-streckkodning kan användas för kvantitativ analys tillsatte vi en intern standard till proverna bestående av syntetiskt DNA, men eftersom resultatet varierade så behöver man arbeta vidare med detta. Den relativa fördelningen av vanliga eukaryota växtplanktongrupper visade sig ha relativt bra överensstämmelse mellan DNA-streckkodning och mikroskopimåttet kolbiomassa, medan biovolym och abundans skiljde sig åt mer. DNA-streckkodning visade sig ge detaljerade utbredningsmönster av skadliga alger, till exempel för släktet Prymnesium bland häftalgerna (Coccolithophyceae). Vi har inom projektet kunnat utvärdera ekologiska drivkrafter för växtplanktonsamhällets diversitet och artsammansättning, genom att miljöövervakningen mäter många fysikalisk-kemiska parametrar. Både salthalt och närsalter visade sig ha stor inverkan på växtplanktonsamhällets sammansättning och diversitet. Sammanfattningsvis ser vi att den framtagna DNA-streckkodningsmetoden skulle vara ett bra komplement till den etablerade växtplanktonövervakningen.
|
|
| 3. |
- Andersson, Mattias, 1985, et al.
(författare)
-
Dielectric strength of γ-radiation cross-linked, high vinyl-content polyethylene
- 2015
-
Ingår i: European Polymer Journal. - : Elsevier BV. - 0014-3057. ; 64, s. 101-107
-
Tidskriftsartikel (refereegranskat)abstract
- We explore γ-radiation cross-linking of high vinyl-content low-density polyethylene (LDPE) and its potential use as a high-voltage insulation material. Of the three investigated resins containing 1, 0.5 and 0.17 vinyl groups per 1000 carbons, respectively, only the highest vinyl-content material featured a sufficiently high gel content of more than 70% and hot-set elongation below 175%, when cross-linked with a γ-radiation dose of at least 68 kGy. Differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS) reveal that neither the crystallinity nor the lamellar thickness of the highest vinyl-content LDPE are negatively affected by γ-radiation cross-linking. As a result, we find that the dielectric strength, as characterized by electrical tree initiation experiments, can be maintained upon γ-radiation cross-linking.
|
|
| 4. |
- Andersson, Peter, 1981-, et al.
(författare)
-
Coincidence spectroscopy for increased sensitivity in radionuclide monitoring
- 2022
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The majority of the energy in a nuclear explosion is released in the immediate blast and the initial radiation accounts. The remaining fraction is released through radioactive decay of the explosion's fission products and neutron activation products over a longer time span. This allows for the detection of a nuclear explosion by detecting the presence of residual decay. Radionuclide monitoring stations for detection of radioactive emissions to the atmosphere is thereby an important tool in the verification of compliance with nuclear disarmament treaties. In particular, the globally spanning radionuclide station network of the International Monitoring System (IMS) has been implemented for verification of the Comprehensive Nuclear-Test-Ban Treaty.High Purity Germanium (HPGe) detectors are workhorses in radionuclide monitoring. The detection of characteristic gamma rays can be used to disclose the presence of signature nuclides produced innuclear weapon tests. A particular development that has potential to improve the sensitivity of radionuclide monitoring is the coincidence technique where decaying nuclides that emit several coincident gamma rays can be detected at much smaller activity concentrations than with conventional gamma spectroscopy.In this project, dedicated gamma-gamma coincidence detectors are being developed, utilizing electronically segmented HPGe detectors. These detectors are expected to be highly sensitive to low-activity samples of nuclides that present coincident emissions of gamma rays. In this paper we present the concept, define performance parameters, and explore the performance of such detectors to a subset of radionuclides of particular CTBT relevance. In addition, we discuss the path forward in developing a next generation gamma-gamma coincidence spectroscopy system of segmented HPGe.
|
|
| 5. |
- Andersson Trojer, Markus, 1981, et al.
(författare)
-
Charged microcapsules for controlled release of hydrophobic actives. Part III: The effect of polyelectrolyte brush- and multilayers on sustained release
- 2013
-
Ingår i: Physical Chemistry Chemical Physics. - : Royal Society of Chemistry (RSC). - 1463-9084 .- 1463-9076. ; 15:17, s. 6153-6165
-
Tidskriftsartikel (refereegranskat)abstract
- Poly(methyl methacrylate) microspheres have been prepared by the internal phase separation method using either of the three conventional dispersants poly(vinyl alcohol) (PVA), poly(methacrylic acid) (PMAA), or the amphiphilic block copolymer poly(methyl methacrylate)-block-poly(sodium methacrylate). The block copolymer based microsphere, which has a polyelectrolyte brush on the surface, was surface modified with up to two poly(diallyldimethylammonium chloride)-poly(sodium methacrylate) bilayers. The microspheres were loaded with the hydrophobic dye 2-(4-(2-chloro-4-nitrophenylazo)-N-ethylphenylamino)ethanol (Disperse Red 13) and its release from aqueous dispersions of microspheres with the different surface compositions was measured by spectrophotometry. The burst fraction, burst rate and the diffusion constant were determined from a model combining burst and diffusive release. Out of the three dispersants, the block copolymer gave the slowest release of the dye, with respect to both burst release and diffusive release. A very pronounced further reduction of the diffusion constant was obtained by applying polyelectrolyte multilayers on top of the microspheres. However, the diffusion constant was very weakly dependent on further polyelectrolyte adsorption and one polyelectrolyte bilayer appeared to suffice.
|
|
| 6. |
- Andersson Trojer, Markus, et al.
(författare)
-
Elastic strain-hardening and shear-thickening exhibited by thermoreversible physical hydrogels based on poly(alkylene oxide)-grafted hyaluronic acid or carboxymethylcellulose
- 2020
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry. - 1463-9076 .- 1463-9084. ; 22:26, s. 14579-14590
-
Tidskriftsartikel (refereegranskat)abstract
- The formation of strongly elastic physical gels based on poly(alkylene oxide)-grafted hyaluronan or carboxymethylcellulose, exhibiting both shear-thickening and strain-hardening have been studied using rheometry and explained using a slightly different interpretation of the transient network theory. The graft copolymers were prepared by a quantitative coupling reaction. Their aqueous solutions displayed a thermoreversible continuous transition from Newtonian fluid to viscoelastic solid which could be controlled by the reaction conditions. The evolution of all material properties of the gel could be categorized into two distinct temperature regimes with a fast evolution at low temperatures followed by a slow evolution at high temperatures. The activation energy of the zero shear viscosity and the relaxation time of the graft inside the interconnecting microdomains were almost identical to each other in both temperature regimes. This suggests that the number of microdomains remained approximately constant whereas the aggregation number inside the microdomains increased according to the binodal curve of the thermosensitive graft.
|
|
| 7. |
- Andersson Trojer, Markus, 1981, et al.
(författare)
-
Quantitative Grafting for Structure-Function Establishment: Thermoresponsive Poly(alkylene oxide) Graft Copolymers Based on Hyaluronic Acid and Carboxymethylcellulose
- 2019
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1525-7797 .- 1526-4602. ; 20:3, s. 1271-1280
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019 American Chemical Society. A series of thermoresponsive graft copolymers, gelling at physiological conditions in aqueous solution and cell growth media, have been synthesized using quantitative coupling between a small set of amino-functionalized poly(alkylene oxide) copolymers (PAO) and the carboxylate of the biologically important polysaccharides (PSa) carboxymethylcellulose and the less reactive hyaluronate. Quantitative grafting enables the establishment of structure-function relationship which is imperative for controlling the properties of in situ gelling hydrogels. The EDC/NHS-mediated reaction was monitored using SEC-MALLS, which revealed that all PAOs were grafted onto the PSa backbone. Aqueous solutions of the graft copolymers were Newtonian fluids at room temperatures and formed reversible physical gels at elevated temperatures which were noncytotoxic toward chondrocytes. The established structure-function relationship was most clearly demonstrated by inspecting the thermogelling strength and the onset of thermogelling in a phase diagram. The onset of the thermogelling function could be controlled by the global PAO concentration, independent of graft ratio.
|
|
| 8. |
- Gårdebjer, Sofie, 1985, et al.
(författare)
-
The impact of interfaces in laminated packaging on transport of carboxylic acids
- 2016
-
Ingår i: Journal of Membrane Science. - : Elsevier BV. - 0376-7388 .- 1873-3123. ; 518, s. 305-312
-
Tidskriftsartikel (refereegranskat)abstract
- The permeability of oleic and acetic acid through low density polyethylene (LDPE) and ethylene acrylic acid (EAA) have been measured using diffusion cells. In addition, the permeability through combinations of LDPE and EAA in the form of laminates with different numbers of layers has been determined. Oleic acid shows an almost 30 times higher permeability compared to acetic acid, which was partly explained by the adsorption of oleic acid to the film surface during the permeability experiment. In addition, the permeability is lower for both oleic and acetic acid in the laminates compared to the pure films. The decreased permeability can be explained by the presence of crystalline domains close to the interface. This is supported by SAXS data which suggests an ordering of polymer chains in the EAA film close to the interface. In summary, the results show that it is possible to create barrier materials with decreased permeability, which is interesting for example in the packaging industry.
|
|
| 9. |
|
|
| 10. |
- Kumar Wagri, Naresh, 1988-
(författare)
-
Assessment of bio-based fuel ash effects on magnesia refractory materials in quicklime production kilns
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Limestone is calcined into quicklime in lime kilns at temperatures above 1000°C. Heat is supplied through combustion inside the kilns, which are insulated with a lining of refractory bricks to mitigate heat loss and to protect the kiln from the hot, chemically aggressive, and mechanically abrasive environment. While magnesia bricks have proven to be effective lining materials, they are still susceptible to extensive wear in lime kilns, especially in the burn zone. Refractory corrosion, in particular, can occur when melted fuel ash infiltrates the refractory materials through pores and small cracks. This resultant wear can lead to high maintenance and operational costs, often due to unplanned kiln shutdowns.To reduce the release of fossil-based carbon dioxide into the atmosphere from lime production kilns, there is a growing interest in introducing bio-based fuels with only relatively minor modifications to the process. Biomass fuels can be sourced from bio-based waste streams from industries or be specifically cultivated for combustion. However, the ash content and properties of bio-based fuels tend to be problematic from an ash chemistry perspective. Therefore, before introducing a new fuel source, it is essential to investigate its potential effects on the kiln lining material. In this thesis work, the interactions between melted olive pomace ash and coal ash with commercially available magnesia refractory materials, primarily composed of periclase (MgO) with minor amounts of spinel (MgAl2O4), were studied. A procedure for quantifying the intrusion depths was described. Refractory samples were exposed to the fuel ashes under a simulated lime kiln atmosphere with high CO2 levels at 1200 and 1400°C for 15 and 60 minutes. Cold crushing strength tests were conducted on refractory samples exposed to coal and olive pomace ash, along with CaO powder, at 1400°C for 96 hours. Additionally, postmortem analyses of spent MgO-based refractory bricks were carried out to investigate their chemical characterization and resistance to slag attack after serving as part of the lining in a quick lime rotary kiln for six months.The morphology and elemental compositions of the exposed samples were examined using scanning electron microscopy and energy-dispersive X-ray spectroscopy. Crystalline phases were investigated with powder X-ray diffraction. Thermodynamic equilibrium calculations were performed to further investigate the ash’s melting behavior in contact with the refractories.The results indicated that the potassium-rich olive pomace ash exhibited a greater tendency to infiltrate compared to the silicon-rich coal ash, while the latter formed a glassy melt layer on top of the refractory samples. The ash slags primarily infiltrated through the porous matrix and grain boundaries of the refractory materials. Also, refractory phases were observed in both types of ashes, indicating migration of refractory constituents. K2MgSiO4 phase was found in the olive pomace ash residues on top of the samples, both for the 1200°C and 1400°C exposures. Similarly, Al6Si2O13 phase was dominant in the residual coal ash, in both the 1200°C and 1400°C exposed samples. None of these phases were present in the original ashes.The results of the postmortem analysis revealed that there was no potassium (K) from the fuel ash present on the hot side of the refractory bricks. However, some K was detected in the middle and back parts of the bricks. On the other hand, some phases, possibly connected to degradation, could be found on the hot side of the bricks, where most of the wear was observed.The crushing strengths increased after exposure for all samples, except for those exposed exclusively to coal ash. One possible explanation for this is that the refractory materials exhibited a sintered structure, as a result of their interaction with the ashes and CaO. However, in the samples exposed to coal ash, forsterite (Mg2SiO4) was identified, which can be considered a corrosion product.
|
|
