1. |
- Andrae, Anders, 1973, et al.
(författare)
-
Uncertainty estimation by Monte Carlo Simulation applied to Life Cycle Inventory of Cordless Phones and Microscale Metallization Processes
- 2004
-
Ingår i: IEEE Transactions on Electronics Packaging Manufacturing. ; 27:4, s. 233-245
-
Tidskriftsartikel (refereegranskat)abstract
- This paper focuses on uncertainty analysis, that is, how the input data uncertainty affects the output data uncertainty in small but realistic product systems is modeled. The motivation for the study is to apply the Monte Carlo simulation for uncertainty estimation in life cycle inventory and environmental assessment of microelectronics applications. This paper addresses the question whether there is an environmental advantage of using DECT phones instead of GSM phones in offices. The paper also addresses the environmental compatibility of Electrochemical Pattern Replication (ECPR) compared to classical photolithography based microscale metallization (CL) for pattern transfer. Both environmental assessments in this paper consider electricity consumption and CO2 emissions. The projects undertaken are two comparative studies of DECT phone/GSM phone and ECPR/CL respectively. The research method used was probabilistic uncertainty modelling with a limited number of inventory parameters used in the MATLAB tool. For the DECT/GSM study the results reflects the longer DECT technical life which is an environmental advantage. For the Electrochemical Pattern Replication (ECPR)/classical photolithography based microscale metallization (CL) study the results reflects the fewer number of process steps and the lower electricity consumption needed by the ECPR to reach the functional unit. The difference in results is large enough to be able to draw conclusions, as the processes with the highest electricity consumption within the system boundaries have been determined. Based on earlier work a straightforward method to include uncertainty for input life cycle inventory data is used to quantify the influence of realistic errors for input data in two microelectronic applications. The conclusion is that the ECPR technology is more electricity efficient than CL in producing one layer of copper on a silicon wafer having a diameter of 20.32 cm. The conclusion is that the longer technical life of a cordless DECT phone is reflected in an electricity/CO2 comparison with a GSM phone, if use in an office is considered. Reasonable uncertainty intervals used for the input life cycle inventory data for the studied DECT/GSM and ECPR/CL system does affect the outcome of calculation of emission of CO2 but not to the degree that conclusions are not valid.Different uncertainty intervals and probability distributions could apply for different types of data and the interrelated input data dependence should be investigated. Today there exist very few life cycle inventory (LCI) data with the range of uncertainty for input and output elements. It must be emphasized that the upcoming LCI databases should have standard deviation characterized LCI data just as the Swiss ecoinvent LCI database.More inventory parameters and probability distributions characteristic for microsystems could be included and error analysis should be applied to future life inventory methodology, especially for future packaging concepts such as System-In-a-Package and System-On-a-Chip comparisons.
|
|
2. |
|
|
3. |
- Andrae, Anders, 1973, et al.
(författare)
-
Application of Simplified Methods for Partial Environmental Assessment of Microelectronics Soldering Materials and Processes in Small and Medium Sized Enterprises
- 2005
-
Ingår i: International Journal of Life Cycle Assessment. ; 10:5
-
Tidskriftsartikel (refereegranskat)abstract
- As a consequence of the environmental regulations becoming stricter for companies within the microelectronics business area, alternative materials and processes with lower environmental performance will have to come in use. These new materials and processes should be process validated, and environmentally assessed. The Swedish microelectronics manufacturers do not use environmental assessment tools to determine if one alternative is "greener" than the other, as they have neither time nor legislative pressure. Instead, they refer to ´lists´ regarding limitations in the use of forbidden chemicals, and compare the ´lists´ with material safety data sheets. IVF in Sweden had the task of co-ordinating a governmentally financed project of which one of the goals was to advise producers, of microelectronics, on how to compare different material/process alternatives when introducing Pb-free soldering manufacturing technology. The scope of this paper is the evaluation of simplified and partial environmental assessment methods for microelectronics soldering. The problem addressed was the identified scarce understanding and under-use of environmental assessment methodologies in the small and medium sized enterprises in the Swedish electronics industry. A subtask was to analyse if it would be possible to perform a useful evaluation in one working day.A literature study revealed that several methods exist for environmental assessment, but most of them were assessed to be too complicated for the purpose of the present study. Two methods were introduced in the project; a qualitative Checklist Method (CM), and the quantitative Toxic Potential Indicator (TPI) that was used as a screening approach. The methods were tested at a microelectronics manufacturer to find out the applicability and the easiness of use. The checklist was applied to two wave soldering concepts and the TPI was applied to two Sn-Pb solder pastes and two Pb-free solder pastes. The CM generates information that can be used in the identification of qualitative environmental aspects, and the TPI provides fast but coarse results. It was possible for the company to perform this limited environmental assessment in one working day, as the amount of available input information is fairly limited. The participating microelectronics manufacturers in this study have confirmed this. The companies will use fast, understandable and rapidly introducible methods. The TPI was easy to use practically, but the input data available was regarded as too rough to distinguish among similar solder pastes. Anyway, by using the methods described in this paper, it would be possible to perform the assessment in one working day. It was perceived as worthwhile for the CM, and also to some degree for the TPI, despite data gaps for flux constituents. It is recommended that the flux constituents of solder pastes are risk evaluated to provide data for indicator tools like the TPI. The CM and the TPI should also be evaluated in industry sectors other than the microelectronics sector. This is needed to generally answer whether there are useful and systematic methods of environmental risk evaluation in product development. In a broader view, it should be researched what barriers are hindering small and medium sized enterprises to invest more in design for environment.
|
|
4. |
|
|
5. |
- Andrae, Anders, 1973, et al.
(författare)
-
Development of a generic data collection model for upstream processes in life cycle inventory of electronic products
- 2002
-
Ingår i: Proceedings of First International Conference on Design And Manufacturing for Sustainable Development. - 1860583962 ; , s. 241-253
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Considerations of cost, high speed, high reliability, high manufacturability and environmental compatibility have to be taken into account in future product development of electronic products. To simulate the environmental compatibility, for example a Life Cycle Assessment (LCA) can be performed. An electronic product usually consists of hundreds to thousands of electronic and mechanical components. To perform an LCA is very time consuming if a Life Cycle Inventory (LCI) is done for every single component. This is not needed because the unit processes in the upstream product system in some cases are the same for the ingoing components. In this paper a generic model for LCI is developed and applied to one product system (a business telephone). In this model, the components are divided into main groups and then into sub-groups that result in process modules for unit processes that are similar for the ingoing components. There already exist some models that describe the LCI of electronic products in other ways. This model takes the LCI strategy for the manufacturing phase one step further by identifying which processes constitute part of the common denominator of the upstream product system and proposes which ones should be inventoried first. The developed model makes it possible to obtain a higher resolution and level of understanding compared to earlier models with respect to both components and processes.
|
|
6. |
|
|
7. |
|
|
8. |
|
|
9. |
- Andrae, Anders, 1973, et al.
(författare)
-
Life Cycle Assessment of a telecommunications exchange
- 2000
-
Ingår i: Journal of Electronics Manufacturing. ; 10:3, s. 147-160
-
Tidskriftsartikel (refereegranskat)abstract
- This paper describes a comparative life cycle assessment (LCA) of a new Business Communication 10 (BC10) and an old Business Communication 8 (BC8) model of the private branch exchange Modular Digital 110 (MD 110), designed and sold by Ericsson Enterprise AB (EE) and produced by Flextronics, in this case for the European Union (EU) market. LCA is a technique for assessing the environmental aspects and potential impact associated with a products whole life cycle from the cradle to the grave. The study meets the requirements of the standards International Organisation for Standardisation (ISO) 14040:1997 English (E), ISO 14041:1998 E and the draft standards ISO/Draft International Standard (DIS) 14042 and ISO/DIS 14043 and was critically reviewed by Henrik Wenzel, Instituttet for ProduktUdvikling (The Institute for Product Development, IPU) in Denmark. The modelling of the system includes manufacturing (hardware and EEs organisation), use stage (electricity consumption), end-of-life (recycling processes) and transports. Electronic devices are modelled in depth (16 groups of components) and data from over 40 suppliers have been collected. EEs organisation (development, marketing & sales, supply, installation, service and maintenance) is modelled for use of offices and business travelling. The following main conclusions of the project are based on results for potential contributions to the environmental impact categories acidification, global warming and eutrophication, which were chosen to be the most relevant. The environmental impact improvements of the new model compared to the old are approximately 10%, and the uncertainty of the results is judged to be smaller than the difference between the systems.The use stage and the manufacturing stage give the largest impacts, both for the new and the old model. In the manufacturing stage, the hardware production clearly dominates. EEs organisation is secondly most important and hardware transport is least important. This is due to more environmental load from service and business travelling in the organisation than environmental load arising from the distribution of the product. The results predominantly reflect energy use, whereas toxicological aspects could not be reliably assessed due to lack of data and reliable methods and needs separate attention. The technology improvements shown for BC10 compared to BC8 only describe design improvements made by EE, and do not take into account potential technology production improvements made by component suppliers.
|
|
10. |
- Andrae, Anders, 1973, et al.
(författare)
-
Significance of intermediate production processes in life cycle assessment of electronic products assessed using a generic compact model
- 2005
-
Ingår i: Journal of Cleaner Production. ; 13:13-14, s. 1269-1279
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper a generic model for life cycle inventory (LCI) data collection is presented and applied to a product system of a digital system telephone (DST). It is also shown that intermediate unit processes (IUPs) are of global warming importance. Compared to earlier efforts in the field of environmental life-cycle assessment of electronic products, the developed model enables a more partitioned LCA result, with respect to both components and processes. In our model the components are first divided into main groups and then into sub-groups. This division results in process modules for unit processes, some of which are similar for the ingoing components, thus reducing the computational effort. The model is demonstrated for a cradle-to-gate calculation focusing on greenhouse gas emissions. Using scenario analysis for integrated circuits and printed wiring boards, the possible contribution from IUPs was analysed.
|
|