| 1. |
- Annaduzzaman, Md., et al.
(författare)
-
Tubewell platform color as a screening tool for arsenic in shallow drinking water wells in Bangladesh
- 2016
-
Ingår i: Arsenic Research and Global Sustainability - Proceedings of the 6th International Congress on Arsenic in the Environment, AS 2016. - : CRC Press/Balkema. - 9781138029415 ; , s. 632-633
-
Konferensbidrag (refereegranskat)abstract
- The development of a simple and low cost technique for determination of arsenic (As) in drinking water wells is an urgent need to accelerate As mitigation policy. The aim of this study was to evaluate the potentiality of tubewell platform color as low-cost, quick and convenient screening tool for As. The result shows strong correlation between the development of red color stain on tubewells platform and As enrichment in the corresponding tubewells water compared to WHO (10 μg/L) and BDWS (50 μg/L), with 99% certainty. The red color stain in the platform indicates 98% sensitivity with WHO (10 μg/L) and BDWS (50 μg/L). With regard to WHO and BDWS, the corresponding efficiency of the platform color as screening tool for As are 97.3% and 97%. This study suggests that platform color can be potentially used for screening tubewells, help users switch to tube wells with low As and facilitate sustainable As mitigation efforts in developing countries.
|
|
| 2. |
- Annaduzzaman, Md, et al.
(författare)
-
Arsenic and manganese in shallow tubewells : validation of platform color as a screening tool in Bangladesh
- 2018
-
Ingår i: Groundwater for Sustainable Development. - : Elsevier B.V.. - 2352-801X. ; 6, s. 181-188
-
Tidskriftsartikel (refereegranskat)abstract
- This study aimed to evaluate the potential of handpump tubewell platform color as a low-cost, quick and convenient screening tool for As and Mn in drinking water tubewells. For this study, groundwater samples and corresponding tubewell platform pictures were collected from 272 shallow tubewells in Matlab Upazila of South-Eastern Bangladesh. The result shows that arsenic concentration within the surveyed (n = 272) tubewells, 99% (n = 269) exceeded the World Health Organization (WHO) guideline value of 10 µg/L, and 98% (n = 267) exceeded the Bangladesh drinking water standards (BDWS) of 50 µg/L. In relation to the platform color concept, within 233 (total 272) red colored platform tubewells, 230 (99%) exceeded the WHO guideline value of 10 µg/L, and 229 (98%) tubewells exceeded BDWS of 50 µg/L. This result shows a strong correlation between the development of red color stain on tubewell platform and As concentrations in the corresponding tubewell water. This study suggests that red-colored platform can be used for primary identification of tubewells with an elevated level of As and thus could prioritize sustainable As mitigation management in developing countries where water comes from reductive shallow aquifers. This study did not confirm the potential for Mn screening, as red discoloration by Fe oxides was found to mask the black discoloration of Mn oxides. It is recommended to further investigate this screening tool in regions with a higher well-to-well variability of As contaminations, as in the presented study As was found >10ug/L in 99% of the tubewells.
|
|
| 3. |
- Annaduzzaman, Md., et al.
(författare)
-
Characterization of a chitosan biopolymer and arsenate removal for drinking water treatment
- 2014
-
Ingår i: One Century of the Discovery of Arsenicosis in Latin America (1914-2014). - : CRC Press. - 9781138001411 ; , s. 745-747
-
Konferensbidrag (refereegranskat)abstract
- Chitosan biopolymer with a deacetylation degree of 85%, was assessed for its capability to adsorb As(V) from drinking water by batch experiments. To characterize the chitosan biopolymer, chitosan was analyzed by FTIR and SEM. The results showed that chitosan is an effective and promising sorbent for As(V) from drinking water. From the batch tests, results showed a maximum adsorption of 355 μg/L of As(V) with 1.18 μg g-1 adsorption capacity at pH 6. The kinetic data, obtained at pH 6 could be fitted with pseudo-second order equation (adsorption capacity: 0.923 μg g-1) and the process was suitably described by a Freundlich (R2 = 0.9933) model than by a Langmuir model (R2 = 0.9741). The results above indicated that chitosan is a very favorable sorbent for As(V) removal from aqueous solution.
|
|
| 4. |
|
|
| 5. |
- Annaduzzaman, Md, 1986-
(författare)
-
Chitosan biopolymer as an adsorbent for drinking water treatment : Investigation on Arsenic and Uranium
- 2015
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In many countries over the world (including Sweden), metal toxicity in freshwater resources causes a severe drinking water quality problem and poses a threat to the environment and human health. Among the different toxic metals in the water resources of Sweden, arsenic and uranium are the biggest threats to health. These elements, over long time consumption, may even lead to cancer and/or neurological disorder. Most of the wells are installed in crystalline and sedimentary bedrock and the received water comes from water bearing fractures in the bedrock. The handling of such water is an issue and there is a need to reduce the arsenic and uranium exposure by improving processes and technologies. It is a very serious problem demanding a safe, sustainable and eco-friendly arsenic and uranium removal technology prior to drinking water supply. Different treatment systems are available, but many of them are not suitable due to their high cost, operation complexity and waste management issues. Through this study, chitosan biopolymer the second largest abundant polysaccharide on earth after cellulose, was verified as a potential adsorbent for arsenic(V) and uranium(VI) removal from water solution. Adsorbent characterizations were also conducted by XRD, FTIR, SEM, UV-visible spectrum and TGA/DTA investigations. Bench-scale batch experiments were conducted using chitosan biopolymer (DDA-85%) as an adsorbent to determine the arsenic(V) and uranium(VI) removal efficiency, by allowing four important effective parameters e.g. chitosan dosages, pH, contact time and contaminant concentration. The adsorption data at optimum conditions were fitted with Langmuir, Freundlich and Dubinin-Radushkhevic (D-R) isotherm and Lagergren pseudo-first-order and pseudo-second-order kinetic model to investigate the adsorption process. The characterization of materials assured the presence of effective amino, hydroxyl, and carboxyl groups of chitosan. Another advanntage is that the materials are bio-degradable. The results show that the arsenic(V) and uranium(VI) removal efficiency was 100% and 97.45% after 300 minutes with optimum pH of 6.0 and 7.0 respectively. The optimum adsorbent dosages and initial concentration were 60 and 80g/L and 100 and 250 µg/L respectively. The adsorption process was suitably described by Freundlich isotherm (R2 = 0.9933) and Langmuir isotherm (R2 = 0.9858) correspondingly for arsenic(V) uranium(VI) compared to other isotherms. This is an important indicator of homogeneous monolayer adsorption of metals. For both of arsenic(V) and uranium(VI), pseudo-second-order explained the adsorption kinetics better than pseudo-first-order and the second-order kinetic regression coefficient (R2) were 0.9959 and 0.9672 correspondingly. Connecting to the above mentioned results, it can be summed up that the chitosan biopolymer (DDA 85%) can be used as an inexpensive, sustainable and environment-friendly treatment option for arsenic(V) and uranium(VI) contaminated drinking water.
|
|
| 6. |
|
|
| 7. |
- Annaduzzaman, Md., et al.
(författare)
-
Tubewell platform color : A low-cost and rapid screening tool for arsenic and manganese in drinking water
- 2013
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Presence of high level of geogenic arsenic (As) in groundwater is one of the major and adverse drinking water quality problem all over the world, especially in Southeast Asia, where groundwater is the prominent drinking water source. Bangladesh is already considered as one of the most As affected territories, where As contamination in the groundwater is key environmental disasters. Recently besides As, presence of high level of manganese (Mn) in drinking water has also got attention due to its neurological effect on children. It becomes very essential to formulate a reliable safe drinking water management policy to reduce the health threat caused by drinking As and Mn contained groundwater. The development of a simple low cost technique for the determination of As and Mn in drinking water wells is an important step to formulate this policy. The aim of this study was to evaluate the potentiality of tubewell platform color as low-cost, quick and convenient screening tool for As and Mn in drinking water wells (n=272) in a highly arsenic affected area on Matlab, Southeastern Bangladesh.The result shows strong correlation between the development of red color stain on tubewell platform and As enrichment in the corresponding tubewell water compared to WHO drinking water guideline (10 μg/L) as well as Bangladesh drinking water standard (BDWS) (50 μg/L), with certainty values of 98.7% and 98.3% respectively. The sensitivity and efficiency of red colored platforms to screen high As water in tubewells are 98% and 97% respectively at 10 μg/L, whereas at cut-off level of 50μg/L both sensitivity and efficiency values are 98%. This study suggests that red colored platform could be potentially used for primary identification of tubewells with elevated level of As and thus could prioritise sustainable As mitigation management in developing countries. Due to lack of tubewells with black colored platform in the study area, the use of platform color concept for screening of Mn enriched water in the wells have not been tested significantly, which requires further study.Acknowledgements: This study was carried out with support from the Liuuaeus-Palme Academic Exchange Programme supported by International Programs Office (IPK) and the KTH led joint collaborative action research project on Sustainable Arsenic Mitigation- SASMIT (Sid Contribution 750000854).
|
|
| 8. |
- Pramanik, B. K., et al.
(författare)
-
Effect of biological and coagulation pre-treatments to control organic and biofouling potential components of ultrafiltration membrane in the treatment of lake water
- 2016
-
Ingår i: Environmental technology. - : Informa UK Limited. - 0959-3330 .- 1479-487X. ; , s. 1-9
-
Tidskriftsartikel (refereegranskat)abstract
- Biological aerated filter (BAF), sand filtration (SF), alum and Moringa oleifera coagulation were investigated as a pre-treatment for reducing the organic and biofouling potential component of an ultrafiltration (UF) membrane in the treatment of lake water. The carbohydrate content was mainly responsible for reversible fouling of the UF membrane compared to protein or dissolved organic carbon (DOC) content. All pre-treatment could effectively reduce these contents and led to improve the UF filterability. Both BAF and SF markedly led to improvement in flux than coagulation processes, and alum gave greater flux than M. oleifera. This was attributed to the effective removal and/or breakdown of high molecular weight (MW) organics by biofilters. BAF led to greater improvement in flux than SF, due to greater breakdown of high MW organics, and this was also confirmed by the attenuated total reflection-Fourier transform infrared spectroscopy analysis. Coagulation processes were ineffective in removing biofouling potential components, whereas both biofilters were very effective as shown by the reduction of low MW organics, biodegradable dissolved organic carbon and assimilable organic carbon contents. This study demonstrated the potential of biological pre-treatments for reducing organic and biofouling potential component and thus improving flux for the UF of lake water treatment.
|
|
