| 1. |
- Campillo-Cora, Claudia, et al.
(författare)
-
Assessment of Polluted Soil Remediation Using Bacterial Community Tolerance to Heavy Metals as an Indicator
- 2022
-
Ingår i: agronomy. - : MDPI AG. - 2073-4395. ; 12:10
-
Tidskriftsartikel (refereegranskat)abstract
- The assessment of remediation on metal-polluted soils is usually focused on total and/or bioavailable metal content. However, these chemical variables do not provide direct information about reductions in heavy metals pressure on soil microorganisms. We propose the use of bacterial communities to evaluate the efficiency of three remediation techniques: crushed mussel shell (CMS) and pine bark (PB) as soil amendments and EDTA-washing. A soil sample was polluted with different doses of Cu, Ni, and Zn (separately). After 30 days of incubation, the remediation techniques were applied, and bacterial community tolerance to heavy metals determined. If bacterial communities develop tolerance, it is an indicator that the metal is exerting toxicity on them. Soil bacterial communities developed tolerance to Cu, Ni, and Zn in response to metal additions. After remediation, bacterial communities showed decreases in bacterial community tolerance to Cu, Ni, and Zn for all remediation techniques. For Cu and Ni, soil EDTA-washing showed the greatest reduction of bacterial community tolerance to Cu and Ni, respectively, while for Zn the soil amendment with PB was the most effective remediation technique. Thus, bacterial community tolerance to heavy metals successfully detect differences in the effectiveness of the three remediation techniques.
|
|
| 2. |
- Campillo-Cora, Claudia, et al.
(författare)
-
Bacterial community tolerance to Cu in soils with geochemical baseline concentrations (GBCs) of heavy metals : Importance for pollution induced community tolerance (PICT) determinations using the leucine incorporation method
- 2021
-
Ingår i: Soil Biology and Biochemistry. - : Elsevier BV. - 0038-0717. ; 155
-
Tidskriftsartikel (refereegranskat)abstract
- PICT (Pollution Induced Community Tolerance) to Cu is a useful and sensitive tool to assess the effects of Cu pollution in soils under laboratory conditions. However, in field situations, the absence of reference values, i.e. bacterial community tolerance to Cu baseline from non-polluted soils, make the method uncertain when we want to know if a soil is or is not polluted from a microbiological point of view. In order to shed some light on this topic, the PICT (Pollution Induced Community Tolerance) concept was used to determine the bacterial community tolerance to Cu in uncontaminated soils developed on five different parent materials, using log IC50 as a tolerance index. IC50 was calculated as the amount of Cu that inhibit 50% of bacterial growth (estimated via the leucine incorporation method) in a bacterial suspension extracted from soil. With physico-chemical soil characteristics and type of parent material, a linear multiple regression equation was fitted explaining 80% of the variance in log IC50 values. This equation provides a useful tool to estimate the bacterial community tolerance to Cu baseline in a soil using the general soil characteristics, allowing for the more general use of PICT without the need of reference soils.
|
|
| 3. |
- Campillo-Cora, Claudia, et al.
(författare)
-
Estimation of baseline levels of bacterial community tolerance to Cr, Ni, Pb, and Zn in unpolluted soils, a background for PICT (pollution-induced community tolerance) determination
- 2022
-
Ingår i: Biology and Fertility of Soils. - : Springer Science and Business Media LLC. - 0178-2762 .- 1432-0789. ; 58:1, s. 49-61
-
Tidskriftsartikel (refereegranskat)abstract
- The PICT method (pollution-induced community tolerance) can be used to assess whether changes in soil microbial response are due to heavy metal toxicity or not. Microbial community tolerance baseline levels can, however, also change due to variations in soil physicochemical properties. Thirty soil samples (0–20 cm), with geochemical baseline concentrations (GBCs) of heavy metals and from five different parent materials (granite, limestone, schist, amphibolite, and serpentine), were used to estimate baseline levels of bacterial community tolerance to Cr, Ni, Pb, and Zn using the leucine incorporation method. General equations (n = 30) were determined by multiple linear regression using general soil properties and parent material as binary variables, explaining 38% of the variance in log IC50 (concentration that inhibits 50% of bacterial growth) values for Zn, with 36% for Pb, 44% for Cr, and 68% for Ni. The use of individual equations for each parent material increased the explained variance for all heavy metals, but the presence of a low number of samples (n = 6) lead to low robustness. Generally, clay content and dissolved organic C (DOC) were the main variables explaining bacterial community tolerance for the tested heavy metals. Our results suggest that these equations may permit applying the PICT method with Zn and Pb when there are no reference soils, while more data are needed before using this concept for Ni and Cr.
|
|
| 4. |
- Fernandez-Calvino, David, et al.
(författare)
-
Bacterial pollution induced community tolerance (PICT) to Cu and interactions with pH in long-term polluted vineyard soils
- 2011
-
Ingår i: Soil Biology & Biochemistry. - : Elsevier BV. - 0038-0717. ; 43:11, s. 2324-2331
-
Tidskriftsartikel (refereegranskat)abstract
- Pollution induced community tolerance (PICT) has been suggested as an end-point measurement less affected by confounding environmental factors compared to standard methods of microbial growth, activity and community composition. We evaluated the use of PICT to determine Cu toxicity in vineyard soils polluted with Cu based fungicides (25-1120 mg Cu kg(-1)). These soils also varied in pH (4.3-7.3), organic C (0.31-6.91%) and texture (14-56% silt). PICT was estimated as bacterial community tolerance to Cu measured by the [H-3]leucine incorporation method. Bacterial tolerance to Cu increased 9 times in the most polluted compared to the unpolluted soils. Cu tolerance was also affected to a minor degree by pH, organic C and soil texture. Lower bacterial tolerance was found in soils with high pH and organic C, probably due to Cu becoming less bioavailable in soils with high pH and organic C content. The silt content appeared to increase bacterial tolerance, probably due to fine soil particles decreasing Cu bioavailability during the PICT detection phase. Despite the effects of other environmental factors, the main determinant of increased bacterial community tolerance to Cu was the pollution level. PICT measured with the leucine incorporation technique thus appears to be a sensitive and stable concept to evaluate toxic impacts, unless soils with very different pH, organic C or texture are studied. (C) 2011 Elsevier Ltd. All rights reserved.
|
|
| 5. |
- Fernández-Calviño, David, et al.
(författare)
-
Using pine bark and mussel shell amendments to reclaim microbial functions in a Cu polluted acid mine soil
- 2018
-
Ingår i: Applied Soil Ecology. - : Elsevier BV. - 0929-1393. ; 127, s. 102-111
-
Tidskriftsartikel (refereegranskat)abstract
- An extremely acid mine soil polluted with Cu was amended with pine bark, crushed mussel shell or a 1:1 mixture of these two by-products. The performance of the soil microbial community was measured as the bacterial and fungal community growth, which were monitored during 2 years following the amendments. Pine bark caused significant increases of microbial growth rates, but with distinct differences between fungal and bacterial groups. Bacterial growth increased transiently at intermediate rates of pine bark applications, but returned to control rates within 2 years of application. In contrast, pine bark applications consistently increased fungal growth with effects that were maintained throughout the study period. The addition of only crushed mussel shell to the mine soil caused very delayed positive effects on the bacterial growth and almost no significant effects on the fungal growth. However, the combination of pine bark with crushed mussel shells 1:1 mixtures caused positive growth responses of both bacteria and fungi that remained persistent throughout the 2 years of study. Fungal and bacterial growth were both suppressed in the mine soil by the lack of organic matter. In addition, bacterial growth was also secondarily suppressed by acidity, and hence, when organic matter (pine bark) additions were combined with pH increases (crushed mussel shell additions), bacterial growth was additionally stimulated. In conclusion, the proposed mixture of by-products (pine bark and crushed mussel shell) is suggested as a promising reclamation strategy for acid mine soils. These results also suggest that in soils like that studied here the organic matter limitation is a more important factor than the soil pH and Cu availability for fungal and bacterial performance.
|
|
| 6. |
- González-Feijoo, Rocío, et al.
(författare)
-
Effectiveness of cork and pine bark powders as biosorbents for potentially toxic elements present in aqueous solution
- 2024
-
Ingår i: Environmental Research. - 0013-9351. ; 250
-
Tidskriftsartikel (refereegranskat)abstract
- Cork oak and pine bark, two of the most prolific byproducts of the European forestry sector, were assessed as biosorbents for eliminating potentially toxic elements (PTEs) from water-based solutions. Our research suggests that bioadsorption stands out as a viable and environmental eco-friendly technology, presenting a sustainable method for the extraction of PTEs from polluted water sources. This study aimed to evaluate and compare the efficiency of cork powder and pine bark powder as biosorbents. Specifically, the adsorption of Fe, Cu, Zn, Cd, Ni, Pb and Sn at equilibrium were studied through batch experiments by varying PTEs concentrations, pH, and ionic strength. Results from adsorption-desorption experiments demonstrate the remarkable capacity of both materials to retain the studied PTE. Cork powder and pine bark powder exhibited the maximum retention capacity for Fe and Cd, while they performed poorly for Pb and Sn, respectively. Nevertheless, pine bark showed a slightly lower retention capacity than cork. Increasing the pH resulted in cork showing the highest adsorption for Zn and the lowest for Sn, while for pine bark, Cd was the most adsorbed, and Sn was the least adsorbed, respectively. The highest adsorption of both materials occurred at pH 3.5–5, depending on the PTE tested. The ionic strength also influenced the adsorption of the various PTEs for both materials, with decreased adsorption as ionic strength increased. The findings suggest that both materials could be effective for capturing and eliminating the examined PTEs, albeit with different efficiencies. Remarkably, pine bark demonstrated superior adsorption capabilities, which were observed to vary based on the specific element and the experimental conditions. These findings contribute to elucidating the bio-adsorption potential of these natural materials, specifically their suitability in mitigating PTEs pollution, and favoring the recycling and revalorization of byproducts that might otherwise be considered residue.
|
|
| 7. |
- Prieto-Díaz, Rubén, et al.
(författare)
-
Exploring the Effect of Halogenation in a Series of Potent and Selective A2B Adenosine Receptor Antagonists
- 2023
-
Ingår i: Journal of Medicinal Chemistry. - : American Chemical Society (ACS). - 0022-2623 .- 1520-4804. ; 66:1, s. 890-912
-
Tidskriftsartikel (refereegranskat)abstract
- The modulation of the A2B adenosine receptor is a promising strategy in cancer (immuno) therapy, with A2BAR antagonists emerging as immune checkpoint inhibitors. Herein, we report a systematic assessment of the impact of (di- and mono-)halogenation at positions 7 and/or 8 on both A2BAR affinity and pharmacokinetic properties of a collection of A2BAR antagonists and its study with structure-based free energy perturbation simulations. Monohalogenation at position 8 produced potent A2BAR ligands irrespective of the nature of the halogen. In contrast, halogenation at position 7 and dihalogenation produced a halogen-size-dependent decay in affinity. Eight novel A2BAR ligands exhibited remarkable affinity (Ki < 10 nM), exquisite subtype selectivity, and enantioselective recognition, with some eutomers eliciting sub-nanomolar affinity. The pharmacokinetic profile of representative derivatives showed enhanced solubility and microsomal stability. Finally, two compounds showed the capacity of reversing the antiproliferative effect of adenosine in activated primary human peripheral blood mononuclear cells.
|
|
| 8. |
- Santás-Miguel, Vanesa, et al.
(författare)
-
Use of metal nanoparticles in agriculture. A review on the effects on plant germination
- 2023
-
Ingår i: Environmental Pollution. - 0269-7491. ; 334
-
Forskningsöversikt (refereegranskat)abstract
- Agricultural nanotechnology has become a powerful tool to help crops and improve agricultural production in the context of a growing world population. However, its application can have some problems with the development of harvests, especially during germination. This review evaluates nanoparticles with essential (Cu, Fe, Ni and Zn) and non-essential (Ag and Ti) elements on plant germination. In general, the effect of nanoparticles depends on several factors (dose, treatment time, application method, type of nanoparticle and plant). In addition, pH and ionic strength are relevant when applying nanoparticles to the soil. In the case of essential element nanoparticles, Fe nanoparticles show better results in improving nutrient uptake, improving germination, and the possibility of magnetic properties could favor their use in the removal of pollutants. In the case of Cu and Zn nanoparticles, they can be beneficial at low concentrations, while their excess presents toxicity and negatively affects germination. About nanoparticles of non-essential elements, both Ti and Ag nanoparticles can be helpful for nutrient uptake. However, their potential effects depend highly on the crop type, particle size and concentration. Overall, nanotechnology in agriculture is still in its early stages of development, and more research is needed to understand potential environmental and public health impacts.
|
|
| 9. |
- Vázquez-Blanco, Raquel, et al.
(författare)
-
Comparing the effect of Cu-based fungicides and pure Cu salts on microbial biomass, microbial community structure and bacterial community tolerance to Cu
- 2021
-
Ingår i: Journal of Hazardous Materials. - : Elsevier BV. - 0304-3894. ; 409
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of Cu on three different microbial endpoints was studied using different Cu sources, in order to check the usefulness of pure Cu salts to estimate the toxicity of commercial Cu fungicides on soil microbes. Cu additions caused similar dose-response curves of substrate induced respiration (SIR) decreases regardless of Cu source, i.e. the use of pure Cu salts to estimate the effect of Cu fungicides on microbial biomass using SIR may be useful. Phospholipid fatty acid (PLFA) analysis showed that the Cu source was more important for the microbial community structure than Cu concentration. Thus, the use of Cu salts to infer the effects of Cu fungicides on microbial community structure using PLFA analysis is not recommended, since effects of Cu concentration will be confounded with Cu source. Analyzing pollution induced community tolerance (PICT) to Cu showed that the use of pure Cu salts may overestimate Cu effects if Cu salt additions modified the soil pH. The highest doses of Cu salts increased bacterial community tolerance to Cu between 300 and 600 times, while commercial Cu fungicide increases were between 20 and 160 times. Therefore, the use of pure Cu salts to estimate the Cu fungicides effects on soil microbes is not recommended for PLFAs analyses, not suitable for PICT at high Cu concentrations, while useful for SIR.
|
|
| 10. |
- Vázquez-Blanco, Raquel, et al.
(författare)
-
Comparison of Cu salts and commercial Cu based fungicides on toxicity towards microorganisms in soil
- 2020
-
Ingår i: Environmental Pollution. - : Elsevier BV. - 0269-7491. ; 257
-
Tidskriftsartikel (refereegranskat)abstract
- Microbial responses to Cu pollution as a function of Cu sources (Cu salts and commercial Cu fungicides) were assessed in a soil using basal soil respiration, and bacterial and fungal community growth, as endpoints. The soil was amended with different concentrations (0–32 mmol Cu kg−1) of Cu nitrate, Cu sulfate, Bordeaux mixture and 3 types of Cu oxychloride. Cu salts decreased soil pH, while this was not found with the other Cu sources. This difference in soil pH effects caused differences in the respiration, bacterial growth and fungal growth response. Basal soil respiration was negatively affected by Cu addition when the soil was spiked with Cu salts, but almost unaffected by commercial Cu fungicides. Bacterial growth was significantly and negatively affected by Cu addition for all the Cu sources, but Cu toxicity was higher for Cu salts than for commercial Cu fungicides. Fungal growth response was also different for Cu salts and commercial Cu fungicides, but only in the long-term. High Cu amendments using Cu salts stimulated fungal growth, whereas for commercial Cu fungicides, these concentrations inhibited fungal growth. Thus, the use of products similar to those used in commercial fungicides is a recommended practice for Cu risk assessments in soil.
|
|
