1. |
- Bousquet, J., et al.
(författare)
-
Building Bridges for Innovation in Ageing : Synergies between Action Groups of the EIP on AHA
- 2017
-
Ingår i: The Journal of Nutrition, Health & Aging. - : Springer Nature. - 1279-7707 .- 1760-4788. ; 21:1, s. 92-104
-
Tidskriftsartikel (refereegranskat)abstract
- The Strategic Implementation Plan of the European Innovation Partnership on Active and Healthy Ageing (EIP on AHA) proposed six Action Groups. After almost three years of activity, many achievements have been obtained through commitments or collaborative work of the Action Groups. However, they have often worked in silos and, consequently, synergies between Action Groups have been proposed to strengthen the triple win of the EIP on AHA. The paper presents the methodology and current status of the Task Force on EIP on AHA synergies. Synergies are in line with the Action Groups' new Renovated Action Plan (2016-2018) to ensure that their future objectives are coherent and fully connected. The outcomes and impact of synergies are using the Monitoring and Assessment Framework for the EIP on AHA (MAFEIP). Eight proposals for synergies have been approved by the Task Force: Five cross-cutting synergies which can be used for all current and future synergies as they consider overarching domains (appropriate polypharmacy, citizen empowerment, teaching and coaching on AHA, deployment of synergies to EU regions, Responsible Research and Innovation), and three cross-cutting synergies focussing on current Action Group activities (falls, frailty, integrated care and chronic respiratory diseases).
|
|
2. |
- Meyer, H.F., et al.
(författare)
-
Overview of physics studies on ASDEX Upgrade
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heating power, flexible heating mix and comprehensive diagnostic set allows studies ranging from mimicking the scrape-off-layer and divertor conditions of ITER and DEMO at high density to fully non-inductive operation (q 95 = 5.5, ) at low density. Higher installed electron cyclotron resonance heating power 6 MW, new diagnostics and improved analysis techniques have further enhanced the capabilities of AUG. Stable high-density H-modes with MW m-1 with fully detached strike-points have been demonstrated. The ballooning instability close to the separatrix has been identified as a potential cause leading to the H-mode density limit and is also found to play an important role for the access to small edge-localized modes (ELMs). Density limit disruptions have been successfully avoided using a path-oriented approach to disruption handling and progress has been made in understanding the dissipation and avoidance of runaway electron beams. ELM suppression with resonant magnetic perturbations is now routinely achieved reaching transiently . This gives new insight into the field penetration physics, in particular with respect to plasma flows. Modelling agrees well with plasma response measurements and a helically localised ballooning structure observed prior to the ELM is evidence for the changed edge stability due to the magnetic perturbations. The impact of 3D perturbations on heat load patterns and fast-ion losses have been further elaborated. Progress has also been made in understanding the ELM cycle itself. Here, new fast measurements of and E r allow for inter ELM transport analysis confirming that E r is dominated by the diamagnetic term even for fast timescales. New analysis techniques allow detailed comparison of the ELM crash and are in good agreement with nonlinear MHD modelling. The observation of accelerated ions during the ELM crash can be seen as evidence for the reconnection during the ELM. As type-I ELMs (even mitigated) are likely not a viable operational regime in DEMO studies of 'natural' no ELM regimes have been extended. Stable I-modes up to have been characterised using -feedback. Core physics has been advanced by more detailed characterisation of the turbulence with new measurements such as the eddy tilt angle - measured for the first time - or the cross-phase angle of and fluctuations. These new data put strong constraints on gyro-kinetic turbulence modelling. In addition, carefully executed studies in different main species (H, D and He) and with different heating mixes highlight the importance of the collisional energy exchange for interpreting energy confinement. A new regime with a hollow profile now gives access to regimes mimicking aspects of burning plasma conditions and lead to nonlinear interactions of energetic particle modes despite the sub-Alfvénic beam energy. This will help to validate the fast-ion codes for predicting ITER and DEMO.
|
|
3. |
- Stroth, U., et al.
(författare)
-
Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- An overview of recent results obtained at the tokamak ASDEX Upgrade (AUG) is given. A work flow for predictive profile modelling of AUG discharges was established which is able to reproduce experimental H-mode plasma profiles based on engineering parameters only. In the plasma center, theoretical predictions on plasma current redistribution by a dynamo effect were confirmed experimentally. For core transport, the stabilizing effect of fast ion distributions on turbulent transport is shown to be important to explain the core isotope effect and improves the description of hollow low-Z impurity profiles. The L-H power threshold of hydrogen plasmas is not affected by small helium admixtures and it increases continuously from the deuterium to the hydrogen level when the hydrogen concentration is raised from 0 to 100%. One focus of recent campaigns was the search for a fusion relevant integrated plasma scenario without large edge localised modes (ELMs). Results from six different ELM-free confinement regimes are compared with respect to reactor relevance: ELM suppression by magnetic perturbation coils could be attributed to toroidally asymmetric turbulent fluctuations in the vicinity of the separatrix. Stable improved confinement mode plasma phases with a detached inner divertor were obtained using a feedback control of the plasma β. The enhanced D α H-mode regime was extended to higher heating power by feedback controlled radiative cooling with argon. The quasi-coherent exhaust regime was developed into an integrated scenario at high heating power and energy confinement, with a detached divertor and without large ELMs. Small ELMs close to the separatrix lead to peeling-ballooning stability and quasi continuous power exhaust. Helium beam density fluctuation measurements confirm that transport close to the separatrix is important to achieve the different ELM-free regimes. Based on separatrix plasma parameters and interchange-drift-Alfvén turbulence, an analytic model was derived that reproduces the experimentally found important operational boundaries of the density limit and between L- and H-mode confinement. Feedback control for the X-point radiator (XPR) position was established as an important element for divertor detachment control. Stable and detached ELM-free phases with H-mode confinement quality were obtained when the XPR was moved 10 cm above the X-point. Investigations of the plasma in the future flexible snow-flake divertor of AUG by means of first SOLPS-ITER simulations with drifts activated predict beneficial detachment properties and the activation of an additional strike point by the drifts.
|
|
4. |
- Sen, P, et al.
(författare)
-
Vaccine hesitancy decreases in rheumatic diseases, long-term concerns remain in myositis: a comparative analysis of the COVAD surveys
- 2023
-
Ingår i: Rheumatology (Oxford, England). - : Oxford University Press (OUP). - 1462-0332 .- 1462-0324. ; 62:10, s. 3291-3301
-
Tidskriftsartikel (refereegranskat)abstract
- ObjectiveCOVID-19 vaccines have a favorable safety profile in patients with autoimmune rheumatic diseases (AIRDs) such as idiopathic inflammatory myopathies (IIMs); however, hesitancy continues to persist among these patients. Therefore, we studied the prevalence, predictors and reasons for hesitancy in patients with IIMs, other AIRDs, non-rheumatic autoimmune diseases (nrAIDs) and healthy controls (HCs), using data from the two international COVID-19 Vaccination in Autoimmune Diseases (COVAD) e-surveys.MethodsThe first and second COVAD patient self-reported e-surveys were circulated from March to December 2021, and February to June 2022 (ongoing). We collected data on demographics, comorbidities, COVID-19 infection and vaccination history, reasons for hesitancy, and patient reported outcomes. Predictors of hesitancy were analysed using regression models in different groups.ResultsWe analysed data from 18 882 (COVAD-1) and 7666 (COVAD-2) respondents. Reassuringly, hesitancy decreased from 2021 (16.5%) to 2022 (5.1%) (OR: 0.26; 95% CI: 0.24, 0.30, P < 0.001). However, concerns/fear over long-term safety had increased (OR: 3.6; 95% CI: 2.9, 4.6, P < 0.01). We noted with concern greater skepticism over vaccine science among patients with IIMs than AIRDs (OR: 1.8; 95% CI: 1.08, 3.2, P = 0.023) and HCs (OR: 4; 95% CI: 1.9, 8.1, P < 0.001), as well as more long-term safety concerns/fear (IIMs vs AIRDs – OR: 1.9; 95% CI: 1.2, 2.9, P = 0.001; IIMs vs HCs – OR: 5.4 95% CI: 3, 9.6, P < 0.001). Caucasians [OR 4.2 (1.7–10.3)] were likely to be more hesitant, while those with better PROMIS physical health score were less hesitant [OR 0.9 (0.8–0.97)].ConclusionVaccine hesitancy has decreased from 2021 to 2022, long-term safety concerns remain among patients with IIMs, particularly in Caucasians and those with poor physical function.
|
|
5. |
- Jugo, J., et al.
(författare)
-
Design and Performance Analysis of a Nonstandard EPICS Fast Controller
- 2015
-
Ingår i: IEEE Transactions on Nuclear Science. - 0018-9499. ; 62:3, s. 889-896
-
Tidskriftsartikel (refereegranskat)abstract
- Large scientific projects present new technological challenges, such as the distributed control over a communication network. In particular, the middleware Experimental Physics and Industrial Control System (EPICS) is the most extended communication standard in particle accelerators. The integration of modern control architectures in these EPICS networks is becoming common, as for example for the PXI/PXIe and xTCA hardware alternatives. In this paper, a different integration procedure for PXI/PXIe real-time controllers from National Instruments is proposed, using LabVIEW as the design tool. This methodology is considered and its performance is analyzed by means of a set of laboratory experiments. This control architecture is proposed for achieving the implementation requirements of fast controllers, which need an important amount of computational power and signal processing capability, with a tight real-time demand. The present paper studies the advantages and drawbacks of this methodology and presents its comprehensive evaluation by means of a laboratory test bench, designed for the application of systematic tests. These tests compare the proposed fast controller performance with a similar system implemented using an standard EPICS IOC provided by the CODAC system.
|
|
6. |
|
|
7. |
- Arredondo, I., et al.
(författare)
-
Adjustable ECR Ion Source Control System: Ion Source Hydrogen Positive Project
- 2015
-
Ingår i: IEEE Transactions on Nuclear Science. - 0018-9499. ; 62:3, s. 903-910
-
Tidskriftsartikel (refereegranskat)abstract
- ISHP (Ion Source Hydrogen Positive) project consists of a highly versatile ECR type ion source. It has been built for several purposes, on the one hand, to serve as a workbench to test accelerator related technologies and validate in-house made developments, at the first stages. On the other hand, to design an ion source valid as the first step in an actual LINAC. Since this paper is focused on the control system of ISHP, besides the ion source, all the hardware and its control architecture is presented. Nowadays the ion source is able to generate a pulse of positive ions of Hydrogen from 2 mu s to a few range with a repetition rate ranging from 1 Hz to 50 Hz with a maximum of 45 mA of current. Furthermore, the first experiments with White Rabbit (WR) synchronization system are presented.
|
|
8. |
|
|
9. |
|
|
10. |
|
|