| 1. |
- Bécoulet, A., et al.
(författare)
-
Science and technology research and development in support to ITER and the Broader Approach at CEA
- 2013
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10
-
Tidskriftsartikel (refereegranskat)abstract
- In parallel to the direct contribution to the procurement phase of ITER and Broader Approach, CEA has initiated research & development programmes, accompanied by experiments together with a significant modelling effort, aimed at ensuring robust operation, plasma performance, as well as mitigating the risks of the procurement phase. This overview reports the latest progress in both fusion science and technology including many areas, namely the mitigation of superconducting magnet quenches, disruption-generated runaway electrons, edge-localized modes (ELMs), the development of imaging surveillance, and heating and current drive systems for steady-state operation. The WEST (W Environment for Steady-state Tokamaks) project, turning Tore Supra into an actively cooled W-divertor platform open to the ITER partners and industries, is presented.
|
|
| 2. |
- Joffrin, E., et al.
(författare)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
| 3. |
- Decker, J., et al.
(författare)
-
Modelling of LHCD at various densities in tore supra tokamak
- 2012
-
Ingår i: 39th EPS Conference on Plasma Physics 2012, EPS 2012 and the 16th International Congress on Plasma Physics; Stockholm; Sweden; 2 July 2012 through 6 July 2012; Code 96757. - 9781622769810 ; 2, s. 934-937
-
Konferensbidrag (refereegranskat)
|
|
| 4. |
- Dumont, R.J., et al.
(författare)
-
Advances in multi-megawatt, long pulse operation in Tore Supra
- 2012
-
Ingår i: 39th EPS Conference on Plasma Physics 2012, EPS 2012 and the 16th International Congress on Plasma Physics; Stockholm; Sweden; 2 July 2012 through 6 July 2012; Code 96757. - 9781622769810 ; 2, s. 1118-1121
-
Konferensbidrag (refereegranskat)
|
|
| 5. |
- Dumont, R. J., et al.
(författare)
-
Multi-megawatt, gigajoule plasma operation in Tore Supra
- 2014
-
Ingår i: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 56:7
-
Tidskriftsartikel (refereegranskat)abstract
- Integrating several important technological elements required for long pulse operation in magnetic fusion devices, the Tore Supra tokamak routinely addresses the physics and technology issues related to this endeavor and, as a result, contributes essential information on critical issues for ITER. During the last experimental campaign, components of the radiofrequency system including an ITER relevant launcher (passive active multijunction (PAM)) and continuous wave/3.7 GHz klystrons, have been extensively qualified, and then used to develop steady state scenarios in which the lower hybrid (LH), ion cyclotron (IC) and electron cyclotron (EC) systems have been combined in fully stationary shots (duration similar to 150 s, injected power up to similar to 8MW, injected/extracted energy up to similar to 1 GJ). Injection of LH power in the 5.0-6.0MW range has extended the domain of accessible plasma parameters to higher densities and non-inductive currents. These discharges exhibit steady electron internal transport barriers (ITBs). We report here on various issues relevant to the steady state operation of future devices, ranging from operational aspects and limitations related to the achievement of long pulses in a fully actively cooled fusion device (e. g. overheating due to fast particle losses), to more fundamental plasma physics topics. The latter include a beneficial influence of IC resonance heating on the magnetohydrodynamic (MHD) stability in these discharges, which has been studied in detail. Another interesting observation is the appearance of oscillations of the central temperature with typical periods of the order of one to several seconds, caused by a nonlinear interplay between LH deposition, MHD activity and bootstrap current in the presence of an ITB.
|
|
| 6. |
|
|
| 7. |
- Falchetto, G. L., et al.
(författare)
-
The European Integrated Tokamak Modelling (ITM) effort: achievements and first physics results
- 2014
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 54:4
-
Tidskriftsartikel (refereegranskat)abstract
- A selection of achievements and first physics results are presented of the European Integrated Tokamak Modelling Task Force (EFDA ITM-TF) simulation framework, which aims to provide a standardized platform and an integrated modelling suite of validated numerical codes for the simulation and prediction of a complete plasma discharge of an arbitrary tokamak. The framework developed by the ITM-TF, based on a generic data structure including both simulated and experimental data, allows for the development of sophisticated integrated simulations (workflows) for physics application.The equilibrium reconstruction and linear magnetohydrodynamic (MHD) stability simulation chain was applied, in particular, to the analysis of the edgeMHDstability of ASDEX Upgrade type-I ELMy H-mode discharges and ITER hybrid scenario, demonstrating the stabilizing effect of an increased Shafranov shift on edge modes. Interpretive simulations of a JET hybrid discharge were performed with two electromagnetic turbulence codes within ITM infrastructure showing the signature of trapped-electron assisted ITG turbulence. A successful benchmark among five EC beam/ray-tracing codes was performed in the ITM framework for an ITER inductive scenario for different launching conditions from the equatorial and upper launcher, showing good agreement of the computed absorbed power and driven current. Selected achievements and scientific workflow applications targeting key modelling topics and physics problems are also presented, showing the current status of the ITM-TF modelling suite.
|
|
| 8. |
- Huynh, P., et al.
(författare)
-
ICRF HEATING AND TURBULENT TRANSPORT MODELLING OF THE WEST L-MODE PLASMA USING ETS: INTERPRETATIVE AND PREDICTIVE CODE VALIDATION
- 2022
-
Ingår i: 48th EPS Conference on Plasma Physics, EPS 2022. - : European Physical Society (EPS).
-
Konferensbidrag (refereegranskat)abstract
- The European Transport Simulator (“ETS”) [1] is a suite of codes designed to simulate tokamak plasma discharges. Not only it highlights the evolution of particle density and energy due to transport effects accounting for particle, heat and current sources, but it equally provides insight into fast ion dynamics resulting from ICRH (and - if present - beams), and the impact these high-energy populations have on the plasma core [2]. This tool allows to help understand the plasma dynamics in WEST and is being used for optimizing the plasma discharge. In particular, attention is being devoted to identify means to avoid a radiative collapse by ensuring an efficient electron RF induced heating and to help finding favourable conditions to enable the L-H transition. The first step was to verify and validate the simulator in interpretative and predictive mode for some relevant WEST L-mode plasmas. Cyrano [5] and StixRedist [6] are used as ICRH modules [2, 7, 8], while transport is assumed to be due to turbulence and is described exploiting the TGLF module [9, 10]. Collisional electron power computed with the ICRF modules was compared with the experimental one obtained by using the Break In Slope method. Scans in minority density and ICRF power were performed in interpretative mode in order to determine the electron/ion heating ratio, revealing dominant electron heating and highlighting that the neutron rate is a sensitive function of the power absorbed by the deuterons. Seeking for the highest possible compatibility between the various available measurements (electron temperature profiles, stored energy and neutron rate) while staying within realistic error bars, predictive modelling which describes the evolution of particle density and temperatures allows to estimate the ion temperature profiles (not yet available on WEST) and to establish a firm link between the WEST experimental data (e.g. energy & neutron rate) on the one hand and the thermal and fast particle profiles resulting from simulation on the other.
|
|
| 9. |
- Joly, J., et al.
(författare)
-
Self-consistent modelling of heating synergy between NBI and ICRH in JET deuterium plasmas
- 2019
-
Ingår i: Plasma Physics and Controlled Fusion. - : Institute of Physics Publishing (IOPP). - 0741-3335 .- 1361-6587. ; 61:7
-
Tidskriftsartikel (refereegranskat)abstract
- Auxiliary heating is essential to initiate fusion in future tokamaks. In particular, ion heating tends to maximise the alpha power generation by increasing the thermal ion temperature. In order to simulate the plasma heating by ion cyclotron radio frequency waves, the EVE code, a full wave code for IC wave propagation, and SPOT, an orbit following Monte Carlo code combined with the RFOF library which calculates the absorption of wave by ions, have been coupled together. This new package is used for simulating JET plasmas with strong interplay between ion cyclotron resonant heating and neutral beam injection. Simulations shows that up to 20% of the neutron rate generated in recent JET D plasmas is due to the synergy between both heating mechanisms. However, the H concentration plays a critical role on such interplay, because the synergy efficiency weakens with the H concentration. Therefore, the control of the H concentration is mandatory for optimising the fusion reaction rate generation at JET.
|
|
| 10. |
|
|
