1. |
- Hoelzl, M., et al.
(författare)
-
Insights into type-I edge localized modes and edge localized mode control from JOREK non-linear magneto-hydrodynamic simulations
- 2018
-
Ingår i: Contributions to Plasma Physics. - : Wiley-VCH Verlagsgesellschaft. - 0863-1042 .- 1521-3986. ; 58:6-8, s. 518-528
-
Tidskriftsartikel (refereegranskat)abstract
- Edge localized modes (ELMs) are repetitive instabilities driven by the large pressure gradients and current densities in the edge of H-mode plasmas. Type-I ELMs lead to a fast collapse of the H-mode pedestal within several hundred microseconds to a few milliseconds. Localized transient heat fluxes to divertor targets are expected to exceed tolerable limits for ITER, requiring advanced insights into ELM physics and applicable mitigation methods. This paper describes how non-linear magneto-hydrodynamic (MHD) simulations can contribute to this effort. The JOREK code is introduced, which allows the study of large-scale plasma instabilities in tokamak X-point plasmas covering the main plasma, the scrape-off layer, and the divertor region with its finite element grid. We review key physics relevant for type-I ELMs and show to what extent JOREK simulations agree with experiments and help reveal the underlying mechanisms. Simulations and experimental findings are compared in many respects for type-I ELMs in ASDEX Upgrade. The role of plasma flows and non-linear mode coupling for the spatial and temporal structure of ELMs is emphasized, and the loss mechanisms are discussed. An overview of recent ELM-related research using JOREK is given, including ELM crashes, ELM-free regimes, ELM pacing by pellets and magnetic kicks, and mitigation or suppression by resonant magnetic perturbation coils (RMPs). Simulations of ELMs and ELM control methods agree in many respects with experimental observations from various tokamak experiments. On this basis, predictive simulations become more and more feasible. A brief outlook is given, showing the main priorities for further research in the field of ELM physics and further developments necessary.
|
|
2. |
- Arboleda-Velasquez, Joseph F, et al.
(författare)
-
Resistance to autosomal dominant Alzheimer's disease in an APOE3 Christchurch homozygote: a case report.
- 2019
-
Ingår i: Nature medicine. - : Springer Science and Business Media LLC. - 1546-170X .- 1078-8956. ; 25:11, s. 1680-1683
-
Tidskriftsartikel (refereegranskat)abstract
- We identified a PSEN1 (presenilin 1) mutation carrier from the world's largest autosomal dominant Alzheimer's disease kindred, who did not develop mild cognitive impairment until her seventies, three decades after the expected age of clinical onset. The individual had two copies of the APOE3 Christchurch (R136S) mutation, unusually high brain amyloid levels and limited tau and neurodegenerative measurements. Our findings have implications for the role of APOE in the pathogenesis, treatment and prevention of Alzheimer's disease.
|
|
3. |
- Coburn, J., et al.
(författare)
-
Energy deposition and melt deformation on the ITER first wall due to disruptions and vertical displacement events
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:1
-
Tidskriftsartikel (refereegranskat)abstract
- An analysis workflow has been developed to assess energy deposition and material damage for ITER vertical displacement events (VDEs) and major disruptions (MD). This paper describes the use of this workflow to assess the melt damage to be expected during unmitigated current quench (CQ) phases of VDEs and MDs at different points in the ITER research plan. The plasma scenarios are modeled using the DINA code with variations in plasma current I (p), disruption direction (upwards or downwards), Be impurity density n (Be), and diffusion coefficient chi. Magnetic field line tracing using SMITER calculates time-dependent, 3D maps of surface power density q (perpendicular to) on the Be-armored first wall panels (FWPs) throughout the CQ. MEMOS-U determines the temperature response, macroscopic melt motion, and final surface topology of each FWP. Effects of Be vapor shielding are included. Scenarios at the baseline combination of I (p) and toroidal field (15 MA/5.3 T) show the most extreme melt damage, with the assumed n (Be) having a strong impact on the disruption duration, peak q (perpendicular to) and total energy deposition to the first wall. The worst-cases are upward 15 MA VDEs and MDs at lower values of n (Be), with q (perpendicular to,max) = 307 MW m(-2) and maximum erosion losses of similar to 2 mm after timespans of similar to 400-500 ms. All scenarios at 5 MA avoided melt damage, and only one 7.5 MA scenario yields a notable erosion depth of 0.25 mm. These results imply that disruptions during 5 MA, and some 7.5 MA, operating scenarios will be acceptable during the pre-fusion power operation phases of ITER. Preliminary analysis shows that localized melt damage for the worst-case disruption should have a limited impact on subsequent stationary power handling capability.
|
|
4. |
- Coburn, J., et al.
(författare)
-
Reassessing energy deposition for the ITER 5 MA vertical displacement event with an improved DINA model
- 2021
-
Ingår i: Nuclear Materials and Energy. - : Elsevier BV. - 2352-1791. ; 28
-
Tidskriftsartikel (refereegranskat)abstract
- The beryllium (Be) main chamber wall interaction during a 5 MA/1.8 T upward, unmitigated VDE scenario, first analysed in [J. Coburn et al., Phys. Scr. T171 (2020) 014076] for ITER, has been re-evaluated using the latest energy deposition analysis software. Updates to the DINA disruption model are summarized, including an improved numerical convergence for the OD power balance, limitations on the safety factor within the plasma core, and the choice to maintain a constant plasma + halo poloidal cross-section. Such updates result in a broad halo region and higher radiated power fractions compared to previous models. The new scenario lasts for similar to 75 ms and deposits similar to 29 MJ of energy, with the radial distribution of parallel heat flux q parallel to(r) resembling an exponential falloff with an effective lambda(q) = 75 -198 mm. A maximum halo width w(h) of 0.52 m at the outboard midplane is observed. SMITER field line tracing and energy deposition simulations calculate a q(perpendicular to,max) of similar to 83 MW/m(2) on the upper first wall panels (FWP). Heat transfer calculations with the MEMOS-U code show that the FWP surface temperature reaches similar to 1000 K, well below the Be melt threshold. Variations of this 5 MA scenario with Be impurity densities from 0 to 3.10(19) m(-3) also remain below the melt threshold despite differences in energy deposition and duration. These results are in contrast to the early study which predicted melt damage to the first wall [J. Coburn et al., Phys. Scr. T171 (2020) 014076], and emphasize the importance of accurate models for the halo width w(h) and the heat flux distribution q parallel to(r) within that halo width. The 2020 halo model in DINA has been compared with halo current experiments on COMPASS, JET, and Alcator C-Mod, and the preliminary results build confidence in the broad halo width predictions. Results for the 5 MA VDE are compared with those for a 15 MA equivalent, generated using the new DINA model. At the higher current, significant melting of the upper FWP is to be expected.
|
|
5. |
- Bandaru, V., et al.
(författare)
-
Runaway electron fluid model extension in JOREK and ITER relevant benchmarks
- 2024
-
Ingår i: Physics of Plasmas. - 1089-7674 .- 1070-664X. ; 31:8
-
Tidskriftsartikel (refereegranskat)abstract
- We present details of recent extensions of the runaway electron (RE) fluid model implemented in the fusion magnetohydrodynamics code JOREK [M. Hoelzl et al., Nucl. Fusion 61, 065001 (2021)] to include the effects of partially ionized impurity species and deuterium neutrals. The model treats the interaction of runaway electrons with the background plasma via current-coupling. The code is separately benchmarked using ITER (https://www.iter.org/) relevant scenarios, with the GO [G. Papp et al., Nucl. Fusion 53, 123017 (2013)] code in relation to runaway electron beam formation and with the DINA [Khayrutdinov and Lukash, J. Comp. Phys. 109(2), 193–201 (1993)] code in relation to simultaneous runaway beam formation and vertical plasma motion. Benchmark results show a decent agreement in both the cases, which are also discussed.
|
|
6. |
- Vallhagen, O., et al.
(författare)
-
Runaway electron dynamics in ITER disruptions with shattered pellet injections
- 2024
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 64:8
-
Tidskriftsartikel (refereegranskat)abstract
- This study systematically explores the parameter space of disruption mitigation through shattered pellet injection in ITER with a focus on runaway electron (RE) dynamics, using the disruption modeling tool Dream. The physics fidelity is considerably increased compared to previous studies, by e.g. using realistic magnetic geometry, resistive wall configuration, thermal quench onset criteria, as well as including additional effects, such as ion transport and enhanced RE transport during the thermal quench. The work aims to provide a fairly comprehensive coverage of experimentally feasible scenarios, considering plasmas representative of both non-activated and high-performance DT operation, different thermal quench onset criteria and transport levels, a wide range of hydrogen and neon quantities injected in one or two stages, and pellets with various characteristic shard sizes. Using a staggered injection scheme, with a pure hydrogen injection preceding a mixed hydrogen-neon injection, we find injection parameters leading to acceptable RE currents in all investigated discharges without activated runaway sources. Dividing the injection into two stages is found to significantly enhance the assimilation and minimize RE generation due to the hot-tail mechanism. However, while a staggered injection outperforms a single stage injection also in cases with radioactive RE sources, no cases with acceptable RE currents are found for a DT-plasma with a 15MA plasma current.
|
|
7. |
- Vallhagen, Oskar, 1997, et al.
(författare)
-
Runaway electron dynamics in ITER disruptions with shattered pellet injections
- 2024
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 64:8
-
Tidskriftsartikel (refereegranskat)abstract
- This study systematically explores the parameter space of disruption mitigation through shattered pellet injection in ITER with a focus on runaway electron (RE) dynamics, using the disruption modeling tool Dream. The physics fidelity is considerably increased compared to previous studies, by e.g. using realistic magnetic geometry, resistive wall configuration, thermal quench onset criteria, as well as including additional effects, such as ion transport and enhanced RE transport during the thermal quench. The work aims to provide a fairly comprehensive coverage of experimentally feasible scenarios, considering plasmas representative of both non-activated and high-performance DT operation, different thermal quench onset criteria and transport levels, a wide range of hydrogen and neon quantities injected in one or two stages, and pellets with various characteristic shard sizes. Using a staggered injection scheme, with a pure hydrogen injection preceding a mixed hydrogen-neon injection, we find injection parameters leading to acceptable RE currents in all investigated discharges without activated runaway sources. Dividing the injection into two stages is found to significantly enhance the assimilation and minimize RE generation due to the hot-tail mechanism. However, while a staggered injection outperforms a single stage injection also in cases with radioactive RE sources, no cases with acceptable RE currents are found for a DT-plasma with a 15 MA plasma current.
|
|