| 1. |
- Arvidsson, Anna, 1973, et al.
(författare)
-
Early interactions between leukocytes and three different potentially bioactive titanium surface modifications
- 2011
-
Ingår i: Journal of Biomedical Materials Research. Part B - Applied biomaterials. - : Wiley. - 1552-4973 .- 1552-4981. ; 97:2, s. 364-72
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the present study was to compare the early interactions between leukocytes and three different surface modifications, suggested as bioactive. Blasted titanium discs were modified by alkali and heat treatment, sodium fluoride treatment, or hydroxyapatite coating. A number of these discs were also immersed in simulated body fluid (SBF) for a week, a treatment which yielded high levels of calcium and phosphate on each surface type. The specimens were exposed for human venous blood for 32 minutes and the respiratory burst response was measured in terms of reactive oxygen species with a luminometer, and coverage of viable cells with a fluorescence microscope after staining steps. The topography, morphology, and chemistry of the surfaces were evaluated with optical interferometry and scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX). A high respiratory burst response was found for HA coated titanium in comparison with the other surface groups (p < 0.0005). The SBF immersion resulted in an increased respiratory burst response (p < 0.0005) and removed statistically significant differences between the surface groups. Thus, the results in the present study indicate that different titanium surface modifications influence the early inflammatory response differently, and that calcium phosphate compounds increase the inflammatory response.
|
|
| 2. |
- Göransson, Anna, 1970, et al.
(författare)
-
An in vitro comparison of possibly bioactive titanium implant surfaces.
- 2009
-
Ingår i: Journal of Biomedical Materials Research Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 88:4, s. 1037-1047
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the study was to compare Ca and P formation (CaP) and subsequent bone cell response of a blasted and four different possibly bioactive commercially pure (cp) titanium surfaces; 1. Fluoride etched (Fluoride), 2. Alkali-heat treated (AH), 3. Magnesium ion incorporated anodized (TiMgO), and 4. Nano HA coated and heat treated (nano HA) in vitro. Furthermore, to evaluate the significance of the SBF formed CaP coat on bone cell response. The surfaces were characterized by Optical Interferometry, Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). CaP formation was evaluated after 12, 24 and 72 h in simulated body fluid (SBF). Primary human mandibular osteoblast-like cells were cultured on the various surfaces subjected to SBF for 72 h. Cellular attachment, differentiation (osteocalcin) and protein production (TGF-beta(1)) was evaluated after 3 h and 10 days respectively. Despite different morphological appearances, the roughness of the differently modified surfaces was similar. The possibly bioactive surfaces gave rise to an earlier CaP formation than the blasted surface, however, after 72 h the blasted surface demonstrated increased CaP formation compared to the possibly bioactive surfaces. Subsequent bone cell attachment was correlated to neither surface roughness nor the amount of formed CaP after SBF treatment. In contrast, osteocalcin and TGF-beta(1) production were largely correlated to the amount of CaP formed on the surfaces. However, bone response (cell attachment, osteocalcin and TGF-F production) on the blasted controls were similar or increased compared to the SBF treated fluoridated, AH and TiMgO surface. (c) 2008 Wiley Periodicals, Inc. J Biomed Mater Res, 2008.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Almhöjd, Ulrica S., et al.
(författare)
-
Analysis of carious dentine using FTIR and ToF-SIMS.
- 2014
-
Ingår i: Journal of Oral Health and Dental Management. - 1583-5588. ; 13:3, s. 735-744
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract Apart from the Maillard reaction, other processes, such as esterification, take place in carious tissue. The aim of the present study was to analyse sound and carious dentine in terms of ester groups and their reaction with hydrazine derivate using Fourier Transform Infrared Spectroscopy (FTIR) and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). Carious and sound dentine from human premolars were excavated in three series (Experimental Parts I-III) and separated into inner and outer layers of carious dentine. The excavated tooth material was analysed with FTIR (Part I). Carious and sound dentine were also exposed to different chemical treatments and analysed with FTIR-Attenuated Total Reflectance (FTIR-ATR; Part II) and ToF-SIMS (Part III). The FTIR absorption spectra showed that the carious tissue contained ester groups, not detected in sound dentine. The results also indicated a higher occurrence of ester groups in the inner dental caries layer than in the outer ones. Potential binding to these ester groups by hydrazine derivative was observed after different chemical treatments with both FTIR-ATR and ToF-SIMS. The results of the present study revealed ester groups unique to the carious dentine which, after reaction with hydrazine derivative, form a covalent bond not found in sound dentine. The staining of carious unique groups would be clinically helpful in detection and prevention unnecessary removal of sound dentine.
|
|
| 6. |
- Arvidsson, Anna, 1973, et al.
(författare)
-
Characterisation of structures in salivary secretion film formation. An experimental study with atomic force microscopy
- 2004
-
Ingår i: Biofouling. - : Informa UK Limited. - 0892-7014 .- 1029-2454. ; 20:3, s. 181-8
-
Tidskriftsartikel (refereegranskat)abstract
- The purpose of the present study was to characterise the structure dynamics of pure salivary secretions retained on controlled surfaces with different surface energies in the early stage of salivary film formation. Germanium prisms prepared to have either low surface energy or medium surface energy were incubated in fresh secretions of either human parotid saliva (HPS) or human submandibular/sublingual saliva (HSMSLS) for 15, 90, and 180 min. After controlled rinsing with distilled water, the surfaces were air dried and thereafter imaged with atomic force microscopy (AFM). The amount of adsorbed material and the size of the structures detected increased with increased saliva exposure time. The film thicknesses varied from 10 to 150 nm, and both HPS and HSMSLS films contained structures with diameters varying from 40 nm to 2 microm. Some of these were clustered into special formations. The HPS films exhibited a more granular morphology than the HSMSLS films. Furthermore, branched lines were detected on the low surface energy germanium prisms incubated in saliva. The results indicate that exposure time, surface energy, and type of salivary secretion all are factors affecting the adsorption characteristics of salivary films.
|
|
| 7. |
- Arvidsson, Anna, 1973, et al.
(författare)
-
Comparing and visualizing titanium implant integration in rat bone using 2D and 3D techniques
- 2015
-
Ingår i: Journal of Biomedical Materials Research. Part B - Applied biomaterials. - : Wiley. - 1552-4973 .- 1552-4981. ; 103:1, s. 12-20
-
Tidskriftsartikel (refereegranskat)abstract
- The aim was to compare the osseointegration of grit-blasted implants with and without a hydrogen fluoride treatment in rat tibia and femur, and to visualize bone formation using state-of-the-art 3D visualization techniques. Grit-blasted implants were inserted in femur and tibia of 10 Sprague-Dawley rats (4 implants/rat). Four weeks after insertion, bone implant samples were retrieved. Selected samples were imaged in 3D using Synchrotron Radiation-based CT (SRCT). The 3D data was quantified and visualized using two novel visualization techniques, thread fly-through and 2D unfolding. All samples were processed to cut and ground sections and 2D histomorphometrical comparisons of bone implant contact (BIC), bone area (BA), and mirror image area (MI) were performed. BA values were statistically significantly higher for test implants than controls (p<0.05), but BIC and MI data did not differ significantly. Thus, the results partly indicate improved bone formation at blasted and hydrogen fluoride treated implants, compared to blasted implants. The 3D analysis was a valuable complement to 2D analysis, facilitating improved visualization. However, further studies are required to evaluate aspects of 3D quantitative techniques, with relation to light microscopy that traditionally is used for osseointegration studies. (c) 2014 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 103B: 12-20, 2015.
|
|
| 8. |
- Arvidsson, Anna, 1973, et al.
(författare)
-
Formation of calcium phosphates on titanium implants with four different bioactive surface preparations. An in vitro study
- 2007
-
Ingår i: Journal of Materials Science-Materials in Medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 18:10, s. 1945-1954
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the present study was to compare the nucleating and growing behaviour on four types of bioactive surfaces by using the simulated body fluid (SBF) model. Titanium discs were blasted and then prepared by alkali and heat treatment, anodic oxidation, fluoridation, or hydroxyapatite coating. The discs were immersed in SBF for 1, 2, 4 and 6 weeks. Calcium phosphates were found on all specimens, as analysed with scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX). After 1 and 2 weeks of SBF immersion more titanium was accessible with SEM/EDX on the blasted surfaces than the four bioactive surface types, indicating a difference in coverage by calcium phosphates. The Ca/P mean ratio of the surfaces was approximately 1.5 after 1 week, in contrast to the fluoridated specimens which displayed a Ca/P mean ratio of approximately 2. Powder X-ray diffraction (P-XRD) analyses showed the presence of hydroxyapatite on all types of surfaces after 4 and 6 weeks of immersion. The samples immersed for 6 weeks showed a higher degree of crystallinity than the samples immersed for 4 weeks. In conclusion, differences appeared at the early SBF immersion times of 1 and 2 weeks between controls and bioactive surface types, as well as between different bioactive surface types.
|
|
| 9. |
- Arvidsson, Anna, 1973, et al.
(författare)
-
Influence of chemo-mechanical caries removal on the surface topography of dental composite resin and glass-ionomer materials: an in vitro study
- 2004
-
Ingår i: Acta Odontologica Scandinavica. ; 62:3, s. 137-142
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the present study was to investigate the influence of a chemo-mechanical caries removal system, Carisolv gel, on the surface topography of dental filling materials. Thirty specimens of a composite resin (Spectrum) and a compomer (Dyract AP) and 60 specimens of a glass-ionomer (Ketac-Fil Plus) were prepared. The surface topography was investigated with an optical interferometer before and after chemical exposure for 5, 10, or 20 min. Each specimen acted as its own control. The topographical part of the glass-ionomer materials was performed in two series with different drying procedures, since this material exhibits a higher sensitivity to dehydration than the other materials. The surface topographical investigations were complemented with contact angle measurements. After Carisolv gel exposure the density of summits and the developed surface area ratio (3D/2D) were slightly smaller for the composite resin and the compomer. For the minimally dried glass-ionomer material, the results indicated a reduction of the height of the surface structures, as well as a surface area enlargement, after Carisolv gel exposure. No statistically significant changes of contact angles due to Carisolv gel exposure could be detected for any material investigated. If dental filling materials of composite resin or glass-ionomer materials are exposed to Carisolv gel, no or only minor surface topographical changes can be expected.
|
|
| 10. |
- Arvidsson, Anna, 1973, et al.
(författare)
-
Nucleation and growth of calcium phosphates in the presence of fibrinogen on titanium implants with four potentially bioactive surface preparations. An in vitro study.
- 2009
-
Ingår i: Journal of Materials Science: Materials in Medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 20:9, s. 1869-1879
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract The aim of this study was to compare the nucleating and crystal growth behaviour of calcium phosphates on four types of potentially bioactive surfaces, using the simulated body fluid (SBF) model with added fibrinogen. Blasted titanium discs were modified by alkali and heat treatment, anodic oxidation, fluoride treatment, or hydroxyapatite coating. The discs were immersed in SBF with fibrinogen for periods of 3 days and 1, 2, 3 and 4 weeks. The topography, morphology, and chemistry of the surfaces were evaluated with optical interferometry, scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX), and x-ray photoelectron spectroscopy (XPS), respectively. All surface modifications showed early calcium phosphate formation after 3 days, and were almost completely covered by calcium phosphates after 2 weeks. After 4 weeks, the Ca/P ratio was approximately 2.0 for all surface groups except the fluoride modified surface, which had a Ca/P ratio of 1.0–1.5. XPS measurements of the nitrogen concentration, which can be interpreted as an indirect measure of the protein content, reached a peak value after 3 days immersion and decreased thereafter. In conclusion, the results in the present study, when compared to earlier SBF studies without proteins, showed that fibrinogen stimulates calcium phosphates formation. Furthermore, no pronounced differences could be detected between blasted controls and the potentially bioactive specimens.
|
|
