| 1. |
|
|
| 2. |
- Kattge, Jens, et al.
(författare)
-
TRY plant trait database - enhanced coverage and open access
- 2020
-
Ingår i: Global Change Biology. - : Wiley-Blackwell. - 1354-1013 .- 1365-2486. ; 26:1, s. 119-188
-
Tidskriftsartikel (refereegranskat)abstract
- Plant traits-the morphological, anatomical, physiological, biochemical and phenological characteristics of plants-determine how plants respond to environmental factors, affect other trophic levels, and influence ecosystem properties and their benefits and detriments to people. Plant trait data thus represent the basis for a vast area of research spanning from evolutionary biology, community and functional ecology, to biodiversity conservation, ecosystem and landscape management, restoration, biogeography and earth system modelling. Since its foundation in 2007, the TRY database of plant traits has grown continuously. It now provides unprecedented data coverage under an open access data policy and is the main plant trait database used by the research community worldwide. Increasingly, the TRY database also supports new frontiers of trait-based plant research, including the identification of data gaps and the subsequent mobilization or measurement of new data. To support this development, in this article we evaluate the extent of the trait data compiled in TRY and analyse emerging patterns of data coverage and representativeness. Best species coverage is achieved for categorical traits-almost complete coverage for 'plant growth form'. However, most traits relevant for ecology and vegetation modelling are characterized by continuous intraspecific variation and trait-environmental relationships. These traits have to be measured on individual plants in their respective environment. Despite unprecedented data coverage, we observe a humbling lack of completeness and representativeness of these continuous traits in many aspects. We, therefore, conclude that reducing data gaps and biases in the TRY database remains a key challenge and requires a coordinated approach to data mobilization and trait measurements. This can only be achieved in collaboration with other initiatives.
|
|
| 3. |
- Bennett, J. M., et al.
(författare)
-
GloPL, a global data base on pollen limitation of plant reproduction
- 2018
-
Ingår i: Scientific Data. - : Nature Publishing Group. - 2052-4463. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Plant reproduction relies on transfer of pollen from anthers to stigmas, and the majority of flowering plants depend on biotic or abiotic agents for this transfer. A key metric for characterizing if pollen receipt is insufficient for reproduction is pollen limitation, which is assessed by pollen supplementation experiments. In a pollen supplementation experiment, fruit or seed production by flowers exposed to natural pollination is compared to that following hand pollination either by pollen supplementation (i.e. manual outcross pollen addition without bagging) or manual outcrossing of bagged flowers, which excludes natural pollination. The GloPL database brings together data from 2969 unique pollen supplementation experiments reported in 927 publications published from 1981 to 2015, allowing assessment of the strength and variability of pollen limitation in 1265 wild plant species across all biomes and geographic regions globally. The GloPL database will be updated and curated with the aim of enabling the continued study of pollen limitation in natural ecosystems and highlighting significant gaps in our understanding of pollen limitation.
|
|
| 4. |
- Zhu, Youjian, et al.
(författare)
-
Cogasification of Australian Brown Coal with Algae in a Fluidized Bed Reactor
- 2015
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 0887-0624 .- 1520-5029. ; 29:3, s. 1686-1700
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, the use of algae for CO2 abatement, wastewater treatment, and energy production has increasingly gained attention worldwide. In order to explore the potential of using algae as an alternative fuel as well as the possible challenges related to the algae gasification process, two species of macroalgae, Derbesia tenuissima and Oedogonium sp., and one type of microalgae, Scenedesmus sp. were studied in this research. In this work, Oedogonium sp. was cultivated with two protocols: producing biomass with both high and low levels of nitrogen content. Cogasification of 10 wt % algae with an Australian brown coal was performed in a fluidized bed reactor, and the effects of algae addition on syngas yield, ash composition, and bed agglomeration were investigated. It was found that CO and H-2 yield increased and CO2 yield decreased after adding three types of macroalgae in the coal, with a slight increase of carbon conversion rate, compared to the coal alone experiment. In the case of coal/Scenedesmus sp, the carbon conversion rate decreased with lower CO/CO2/H-2 yield as compared to coal alone. Samples of fly ash, bed ash, and bed material agglomerates were analyzed using scanning electron microscopy combined with an energy dispersive X-ray detector (SEM-EDX) and X-ray diffraction (XRD). It was observed that both the fly ash and bed ash samples from all coal/macroalgae tests contained more Na and K as compared to the coal test. High Ca and Fe contents were also found in the fly ash and bed ash from the coal/Scenedesmus sp. test. Significant differences in the characteristics and compositions of the ash layer on the bed particles were observed from the different tests. Agglomerates were found in the bed material samples after the cogasification tests of coal/Oedogonium N+ and coal/Oedogonium N. The formation of liquid alkalisilicates on the sand particles was considered to be the main reason for agglomeration for the coal/Oedogonium N+ and coal/Oedogonium N tests. Agglomerates of fused ash and tiny silica sand particles were also found in the coal/Scenedesmus sp. test. In this case, however, the formation of a Fe-Al silicate eutectic mixture was proposed to be the main reason for agglomeration. Debersia was suggested to be a potential alternative fuel, which can be cogasified with brown coal without any significant operating problems under the current experimental conditions. However, for the other algae types, appropriate countermeasures are needed to avoid agglomeration and defluidization in the cogasification process.
|
|
| 5. |
|
|
| 6. |
- Li, Gule., et al.
(författare)
-
Agglomeration of olivine with potassium- or silicon-rich agricultural residues under conditions relevant to dual fluidized bed gasification
- 2022
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 0887-0624 .- 1520-5029. ; 36:23, s. 14253-14266
-
Tidskriftsartikel (refereegranskat)abstract
- The agglomeration characteristics of olivine- and potassium (K)-rich grape marc or silicon (Si)-rich wheat straw were studied in a laboratory-scale fluidized reactor and compared under air combustion, steam gasification, or CO2 gasification atmospheres at temperatures relevant to a dual fluidized bed gasifier. Agglomeration with grape marc is found to be induced mostly by the formation of adhesive K-rich layers onto the olivine, a process that is significantly augmented in a steam atmosphere compared to that in the air or CO2. The formation of an initial K-rich outer layer, which is caused by the mere physical attachment of K-species onto the olivine surface, facilitated the formation of an inner layer. This inner layer exhibits chemical reactions between grape marc ash and olivine, with the ash elements involved in the chemical reactions differing between combustion and steam gasification environments. Agglomeration with a wheat straw is most significant under air combustion conditions and depends primarily on the temperature rather than on the atmosphere.
|
|
| 7. |
- Zhu, Youjian, et al.
(författare)
-
Fluidized bed co-gasification of algae and wood pellets : gas yields and bed agglomeration analysis
- 2016
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 0887-0624 .- 1520-5029. ; 30:3, s. 1800-1809
-
Tidskriftsartikel (refereegranskat)abstract
- Algae utilization in energy production has gained increasing attention as a result of its characteristics, such as high productivity, rapid growth rate, and flexible cultivation environment. In this paper, three species of algae, including a fresh water macroalgae, Oedogonium sp., a saltwater macroalgae, Derbersia tenuissima, and a microalgae species, Scenedesmus sp., were studied to explore the potential of using smaller amounts of algae fuels in blends with traditional woody biomasses in the gasification processes. Co-gasification of 10 wt % algae and 90 wt % Swedish wood pellets was performed in a fluidized bed reactor. The effects of algae addition on the syngas yield and carbon conversion rate were investigated. The addition of 10 wt % algae in wood increased the CO, H2, and CH4 yields by 3–20, 6–31, and 9–20%, respectively. At the same time, it decreased the CO2 yield by 3–18%. The carbon conversion rates were slightly increased with the addition of 10 wt % macroalgae in wood, but the microalgae addition resulted in a decrease of the carbon conversion rate by 8%. Meanwhile, the collected fly ash and bed material samples were analyzed using scanning electron microscopy combined with an energy-dispersive X-ray detector (SEM–EDX) and X-ray diffraction (XRD) technique. The fly ashes of wood/marcoalgae tests showed a higher Na content with lower Si and Ca contents compared to the wood test. The gasification tests were scheduled to last 4 h; however, only wood and wood/Derbersia gasification experiments were carried out without significant operational problems. The gasification of 10 wt % Oedogonium N+ and Oedogonium N– led to defluidization of the bed in less than 1 h, and the wood/Scenedesmus (WD/SA) test was stopped after 1.8 h as a result of severe agglomeration. It was found that the algae addition had a remarkable influence on the characteristics and compositions of the coating layer. The coating layer formation and bed agglomeration mechanism of wood/macroalgae was initiated by the reaction of alkali compounds with the bed particles to form low-temperature melting silicates (inner layer). For the WD/SA test, the agglomeration was influenced by both the composition of the original algae fuel as well as the external mineral contaminations. In summary, the operational problems experienced during the co-gasification tests of different algae–wood mixtures were assigned to the specific ash compositions of the different fuel mixtures. This showed the need for countermeasures, specifically to balance the high alkali content, to reach stable operation in a fluidized bed gasifier.
|
|
| 8. |
- Zhu, Youjian, et al.
(författare)
-
Preliminary understanding on the ash behavior of algae during co-gasification in an entrained flow reactor
- 2018
-
Ingår i: Fuel processing technology. - : Elsevier. - 0378-3820 .- 1873-7188. ; 175, s. 26-34
-
Tidskriftsartikel (refereegranskat)abstract
- Algae are considered as a promising alternative fuel to produce energy due to its advantages such as high production yield, short growth cycle and flexible growing environment. Unfortunately, ash-related issues restrict its thermochemical utilization due to the high ash content and especially the high alkali metal concentration. In this paper, the gasification performance and ash behavior were experimentally analysed for three macro- and micro-algal species. Clear differences in the proximate and ultimate compositions were found between the cultivated algae used in this study and macroalgae (seaweed) harvested from the marine environments. Algal biomass generally contained higher Na and P contents than lignocellulosic biomass. Microalgae also had a relatively high mineral content due to the impurities in the harvesting process which included centrifugal pumping followed by sedimentation. Co-gasification of 20 wt% algae with softwood was investigated using an entrained flow reactor. The addition of both macroalgal species Derbersia tenuissima and Oedogonium to softwood had a limited influence on the gas yields and carbon conversion. On the other hand, the addition of the microalgal species Scenedesmus significantly decreased the main gas yields and carbon conversion. Moreover, the addition of algae clearly changed the residual ash composition of the base fuel. Finally, a preliminary understanding of the ash behavior of the tested algae blends was obtained through the analysis of the fuel ashes and the collected residual ashes. Fouling and corrosion were presumably occurred during the co-gasification of wood/macroalgae blends in view of the high alkali metal content. Microalga Scenedesmus had a high mineral content which could potentially capture the alkali metal in the ash and mitigate fouling when gasified with softwood. The growing environment and harvesting method were found to be significantly affecting the ash behavior implying the need for careful consideration regarding co-gasification process.
|
|
| 9. |
- Ashman, J, et al.
(författare)
-
A measurement of the ratio of the nucleon structure function in copper and deuterium
- 1993
-
Ingår i: Zeitschrift für Physik C Particles and Fields. - : Springer. - 0170-9739 .- 1431-5858. ; 57:2, s. 211-218
-
Tidskriftsartikel (refereegranskat)abstract
- Results are presented on the ratios of the nucleon structure function in copper to deuterium from two separate experiments. The data confirm that the nucleon structure function, F2, is different for bound nucleons than for the quasi-free ones in the deuteron. The redistribution in the fraction of the nucleon's momentum carried by quarks is investigated and it is found that the data are compatible with no integral loss of quark momenta due to nuclear effects.
|
|
| 10. |
|
|
