| 1. |
- Boelens, O. J., et al.
(författare)
-
F-16XL Geometry and Computational Grids Used in Cranked-Arrow Wing Aerodynamics Project International
- 2009
-
Ingår i: Journal of Aircraft. - : American Institute of Aeronautics and Astronautics (AIAA). - 0021-8669 .- 1533-3868. ; 46:2, s. 369-376
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of the Cranked-Arrow Wing Aerodynamics Project International was to allow a comprehensive validation of computational fluid dynamics methods against the Cranked-Arrow Wing Aerodynamics Project flight database. A major part of this work involved the generation of high-quality computational grids. Before the grid generation, an airtight geometry of the F-16XL, aircraft was generated by a cooperation of the Cranked-Arrow Wing Aerodynamics Project International partners. Based on this geometry description, both structured and unstructured grids have been generated. The baseline structured (multiblock) grid (and a family of derived grids) has been generated by the National Aerospace Laboratory. Although the algorithms used by the National Aerospace Laboratory had become available just before the Cranked-Arrow Wing Aerodynamics Project International and thus only a limited experience with their application to such a complex configuration had been gained, a grid of good quality was generated well within four weeks. This time compared favorably with that required to produce the unstructured grids in the Cranked-Arrow Wing Aerodynamics Project International. The baseline all-tetrahedral and hybrid unstructured grids have been generated at NASA Langley Research Center and the U.S. Air Force Academy, respectively. To provide more geometrical resolution, trimmed unstructured grids have been generated at the European Aeronautic Defence and Space Company's Military Air Systems, University of Tennessee at Chattanooga SimCenter, Boeing Phantom Works, Royal Institute of Technology, and the Swedish Defence Research Agency. All grids generated within the framework of the Cranked-Arrow Wing Aerodynamics Project International will be discussed in the paper. Both results obtained on the structured grids and the unstructured grids showed a significant improvement in agreement with flight-test data in comparison with those obtained on the structured multiblock grid used during the Cranked-Arrow Wing Aerodynamics Project.
|
|
| 2. |
- Ghoreyshi, M., et al.
(författare)
-
Aerodynamic modelling for flight dynamics analysis of conceptual aircraft designs
- 2009
-
Ingår i: 27th AIAA Applied Aerodynamics Conference.
-
Konferensbidrag (refereegranskat)abstract
- Physics based simulation in conceptual design is widely seen as a way of increasing the information about designs, thus helping with the avoidance of unanticipated problems as the design is refined. This paper reports on an effort to assess the use of CFD level aerodynamics for the development of tables for flight dynamics analysis at the conceptual stage. A number of aerodynamic data sources are used with sampling and data fusion to allow the efficient generation of the tables. A refined design passenger jet wind tunnel model is used as a test case, and three simplified conceptual versions of this geometry are generated. The influence of geometry approximations and modelling influences are evaluated to assess the usefulness of CFD for this application. Finally, the aerodynamic differences are assessed in terms of basic longitudinal flight dynamics analysis.
|
|
| 3. |
- Da Ronch, A., et al.
(författare)
-
A framework for constrained control allocation using CFD-based tabular data
- 2011
-
Ingår i: AIAA Aerosp. Sci. Meet. Incl. New Horiz. Forum Aerosp. Expos.. - Reston, Virigina : American Institute of Aeronautics and Astronautics. - 9781600869501
-
Konferensbidrag (refereegranskat)abstract
- This paper describes a framework for control allocation problem using Computational Fluid Dynamics (CFD) aerodata, which is represented by a multidimensional array of dimensionless coefficients of aerodynamic forces and moments, stored as a function of the state vector and control-surface deflections. The challenges addressed are, first, the control surface treatment for the automated generation of aerodata using CFD and, second, sampling and data fusion to allow the timely calculation of large data tables. In this framework, the generation of aerodynamic tables is described based on an efficient sampling/data fusion approach. Also, the treatment of aerodynamics of control surfaces is being addressed for three flow solvers: TORNADO, a vortex-lattice method, and two CFD codes, EDGE from the Swedis Defence Agency and PMB from the University of Liverpool. In TORNADO, the vortex points located at the trailing edge of the flaps are rotated around the hinge line to simulate the deflected surfaces. The transpiration boundary conditions approach is used for modeling moving flaps in EDGE, whereas, the surface deflection is achieved using mode shapes in PMB. The test cases used to illustrate the approaches is the Ranger 2000 fighter trainer and a reduced geometry description of Boeing 747-100. Data tables are then generated for the state vector and multiple control surface deflections. The look-up table aerodata are then used to resolve the control allocation problem under the constraint that each surface has an upper and lower limit of deflection angle.
|
|
| 4. |
- Ghoreyshi, M., et al.
(författare)
-
Automated CFD Analysis for the Investigation of Flight Handling Qualities
- 2011
-
Ingår i: Mathematical Modelling of Natural Phenomena. - : EDP Sciences. - 0973-5348 .- 1760-6101. ; 6:3, s. 166-188
-
Tidskriftsartikel (refereegranskat)abstract
- Physics based simulation is widely seen as a way of increasing the information about aircraft designs earlier in their definition, thus helping with the avoidance of unanticipated problems as the design is refined. This paper reports on an effort to assess the automated use of computational fluid dynamics level aerodynamics for the development of tables for flight dynamics analysis at the conceptual stage. These tables are then used to calculate handling qualities measures. The methodological questions addressed are a) geometry and mesh treatment for automated analysis from a high level conceptual aircraft description and b) sampling and data fusion to allow the timely calculation of large data tables. The test case used to illustrate the approaches is based on a refined design passenger jet wind tunnel model. This model is reduced to a conceptual description, and the ability of this geometry to allow calculations relevant to the final design to be drawn is then examined. Data tables are then generated and handling qualities calculated.
|
|
