| 1. |
- Łyczko, Krzysztof, et al.
(författare)
-
Striking stability of a mixed-valence thallium(III)-thallium(I) complex in some solvents
- 2023
-
Ingår i: Journal of Molecular Liquids. - 0167-7322. ; 385
-
Tidskriftsartikel (refereegranskat)abstract
- At the dissolution of solid anhydrous thallium(III) trifluoromethanesulfonate, Tl(CF3SO3)3, or thallium(III) trifluoroacetate, Tl(CF3COO)3, in dimethylsulfoxide (dmso) or N,N,N’,N’-tetramethylurea (tmu), intensely red-colored complexes are formed. This red thallium complex is stable for years in dmso, while it is reduced fairly rapidly to thallium(I) in tmu with a half-life time of an hour. At the dissolution of Tl(CF3SO3)3 in N,N-dimethylpropyleneurea (dmpu) an immediate reduction to thallium(I) takes place. A stable colorless aqueous thallium(III) solution is obtained at the dissolution in acidic water. Stable dmso solutions and solid dmso solvates of thallium(III) perchlorate, nitrate and trifluormethanesulfonate can be prepared by adding dmso to concentrated acidic aqueous thallium(III) solutions. These experimental observations conclude that the pure solids Tl(CF3SO3)3 and Tl(CF3COO)3 play an essential role in the formation of the red-colored thallium complexes. 205Tl NMR data show that the red thallium complex contains equal amounts of thallium(III) and thallium(I). The structure of the red thallium complex in dmso, as determined by EXAFS, has Tl–O bond distances of 2.216(3) and 2.80(2) Å, which are in very close agreement with the bond distances obtained in the pure dmso solvates of the thallium(III) and thallium(I) ions, respectively, and a Tl···Tl distance of 3.49(1) Å bridged by oxygen atoms. From the EXAFS data it is impossible to distinguish if dmso molecules and/or trifluoromethanesulfonate ions act as bridges. DFT calculations could eliminate some structures due to the irrelevant structural parameters or the energetics of the proposed reactions.
|
|
| 2. |
- Persson, Ingmar, et al.
(författare)
-
EXAFS Study on the Coordination Chemistry of the Solvated Copper(II) Ion in a Series of Oxygen Donor Solvents
- 2020
-
Ingår i: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 59:14
-
Tidskriftsartikel (refereegranskat)abstract
- The structures of the solvated copper(II) ion in water and nine organic oxygen donor solvents with similar electron-pair donor ability, but with different space-demanding properties at coordination, have been studied by EXAFS. N,N′-Dimethylpropyleneurea and N,N,N′,N′-tetramethylurea are sufficiently space demanding at coordination to make the axial positions not accessible, resulting in square-planar copper(II) solvate complexes with an intense green color. The mean Cu-O bond distances in these two solvate complexes are 1.939(3) and 1.935(3) Å, respectively. The best fits of the remaining solvates, which are light blue in different hues, are obtained with a Jahn-Teller distorted-octahedral model consisting of four strongly bound solvent molecules in the equatorial positions at 1.96(2) Å and two in the axial positions but with different Cu-Oax bond distances: ca. 2.15 and 2.32 Å. This is in agreement with observations in solid-state structures of compounds containing hexaaquacopper(II) complexes crystallizing in noncentrosymmetric space groups and all reported crystal structures containing a [Cu(H2O)5(O-ligand)] complex with Jahn-Teller distortion. Such a structure is in agreement with previous EPR and EXAFS studies proving the hydrated copper(II) ion to be a noncentrosymmetric complex in aqueous solution. The refinements of the EXAFS data of the solids [Cu(H2O)6](ClO4)2, [Cu(H2O)6](BrO3)2, [Cu(H2O)6]SiF6, Cu(NO3)2·2.5H2O, and CuSO4·5H2O gave Cu-O bond distances significantly different from those reported in the crystallographic studies but similar to the configuration and bond distances in the hydrated copper(II) ion in aqueous solution. This may depend on whether the orientation of the axial positions is random in one or three dimensions, giving a mean structure of the solid with symmetry higher than that of the individual complexes. This study presents the very first experimental data from the new X-ray absorption spectroscopy beamline Balder at the MAX IV synchrotron radiation facility in Lund, Sweden, as well as the utilized properties of the beamline.
|
|
| 3. |
- Bajnoczi, Eva G., et al.
(författare)
-
The influence of the local structure of Fe(III) on the photocatalytic activity of doped TiO2 photocatalysts-An EXAFS, XPS and Mossbauer spectroscopic study
- 2011
-
Ingår i: Applied Catalysis B: Environmental. - : Elsevier BV. - 0926-3373. ; 103:1-2, s. 232-239
-
Tidskriftsartikel (refereegranskat)abstract
- Fe(III)-doped TiO2 based heterogeneous photocatalysts were prepared by the sol-gel technique (S samples) or flame hydrolysis (F samples). In photocatalytic phenol decomposition, the undoped F-sample performed much better, than the undoped S one. However, for the S samples, photocatalytic activity first increased with the increasing Fe(III) concentration, and then passed through a maximum, while Fe(III)-doping in F samples significantly decreased it, even at the smallest dopant level. Since the same dopant caused opposite photocatalytic effects in the two series, their structure was systematically compared to identify the underlying chemical and/or physical reasons. The photocatalysts were first characterized by AAS, DRS, XRD and TEM methods and it has been shown that the differences in the photocatalytic activity cannot be explained by the minor variations in the bulk structural properties of TiO2. Mossbauer and XP spectroscopic measurements performed on representative samples qualitatively proved that the local structure of Fe(III) is different in the two series. To quantify these effects, Fe-K edge X-ray absorption measurements were performed. From the pre-edge and XANES region it was learnt that Fe(III) was present in a distorted octahedral environment in both series, however, the extent of distortion is much more significant within the S than within the F one. Information obtained from the EXAFS region indicated that the structure of Fe2O3 was much more ordered in the F-series then in the S one and vacancies were more abundant in the S than in the F series. Moreover, the geometry around Fe(III) systematically varied within the S-series, which could explain, why photocatalytic activity passed through a maximum with the increasing Fe(III) concentration in these samples. (C) 2011 Elsevier B.V. All rights reserved.
|
|
| 4. |
- Csendes, Zita, et al.
(författare)
-
Superoxide dismutase inspired immobilised Ni(II)-protected amino acid catalysts Synthesis, characterisation, and catalytic activity
- 2014
-
Ingår i: Journal of Molecular Catalysis A: Chemical. - : Elsevier BV. - 1381-1169. ; 395, s. 93-99
-
Tidskriftsartikel (refereegranskat)abstract
- Covalently anchored Ni(II)-C-protected amino acid (L-histidine, L-cysteine, and L-cystine) complexes inspired by the active site of the Ni-superoxide dismutase enzyme were synthesised using chloropropylated silica gel as support. The structural features of the surface complexes were studied by the Kjeldahl method and ICP-MS, mid/far IR, UV-vis diffuse reflectance, and X-ray absorption spectroscopies. The enzyme-like activities of the materials were determined in a biochemical test reaction. Covalent grafting and building the complex onto the surface of the support were successful in all cases. It was found that in many instances the structures obtained and the coordinating groups substantially varied upon changing the conditions of the syntheses. All the covalently immobilised Ni(II)-complexes displayed enzyme-like activity. They also were active in the liquid-phase oxidation of cyclohexene, providing the epoxide with high selectivity. (C) 2014 Elsevier B.V. All rights reserved.
|
|
| 5. |
- Gustafson, Karl P. J., et al.
(författare)
-
In Situ Structural Determination of a Homogeneous Ruthenium Racemization Catalyst and Its Activated Intermediates Using X-Ray Absorption Spectroscopy
- 2020
-
Ingår i: Chemistry - A European Journal. - : Wiley. - 0947-6539 .- 1521-3765. ; 26:15, s. 3411-3419
-
Tidskriftsartikel (refereegranskat)abstract
- The activation process of a known Ru-catalyst, dicarbonyl(pentaphenylcyclopentadienyl)ruthenium chloride, has been studied in detail using time resolved in situ X-ray absorption spectroscopy. The data provide bond lengths of the species involved in the process as well as information about bond formation and bond breaking. On addition of potassium tert-butoxide, the catalyst is activated and an alkoxide complex is formed. The catalyst activation proceeds via a key acyl intermediate, which gives rise to a complete structural change in the coordination environment around the Ru atom. The rate of activation for the different catalysts was found to be highly dependent on the electronic properties of the cyclopentadienyl ligand. During catalytic racemization of 1-phenylethanol a fast-dynamic equilibrium was observed.
|
|
| 6. |
- Kjær, Kasper S., et al.
(författare)
-
Finding intersections between electronic excited state potential energy surfaces with simultaneous ultrafast X-ray scattering and spectroscopy
- 2019
-
Ingår i: Chemical Science. - : Royal Society of Chemistry (RSC). - 2041-6520 .- 2041-6539. ; 10:22, s. 5749-5760
-
Tidskriftsartikel (refereegranskat)abstract
- Light-driven molecular reactions are dictated by the excited state potential energy landscape, depending critically on the location of conical intersections and intersystem crossing points between potential surfaces where non-adiabatic effects govern transition probabilities between distinct electronic states. While ultrafast studies have provided significant insight into electronic excited state reaction dynamics, experimental approaches for identifying and characterizing intersections and seams between electronic states remain highly system dependent. Here we show that for 3d transition metal systems simultaneously recorded X-ray diffuse scattering and X-ray emission spectroscopy at sub-70 femtosecond time-resolution provide a solid experimental foundation for determining the mechanistic details of excited state reactions. In modeling the mechanistic information retrieved from such experiments, it becomes possible to identify the dominant trajectory followed during the excited state cascade and to determine the relevant loci of intersections between states. We illustrate our approach by explicitly mapping parts of the potential energy landscape dictating the light driven low-to-high spin-state transition (spin crossover) of [Fe(2,2′-bipyridine)3]2+, where the strongly coupled nuclear and electronic dynamics have been a source of interest and controversy. We anticipate that simultaneous X-ray diffuse scattering and X-ray emission spectroscopy will provide a valuable approach for mapping the reactive trajectories of light-triggered molecular systems involving 3d transition metals.
|
|
| 7. |
- Kjær, Kasper S., et al.
(författare)
-
Solvent control of charge transfer excited state relaxation pathways in [Fe(2,2′-bipyridine)(CN)4]2-
- 2018
-
Ingår i: Physical Chemistry Chemical Physics. - : Royal Society of Chemistry (RSC). - 1463-9076 .- 1463-9084. ; 20:6, s. 4238-4249
-
Tidskriftsartikel (refereegranskat)abstract
- The excited state dynamics of solvated [Fe(bpy)(CN)4]2-, where bpy = 2,2′-bipyridine, show significant sensitivity to the solvent Lewis acidity. Using a combination of optical absorption and X-ray emission transient spectroscopies, we have previously shown that the metal to ligand charge transfer (MLCT) excited state of [Fe(bpy)(CN)4]2- has a 19 picosecond lifetime and no discernable contribution from metal centered (MC) states in weak Lewis acid solvents, such as dimethyl sulfoxide and acetonitrile.1,2 In the present work, we use the same combination of spectroscopic techniques to measure the MLCT excited state relaxation dynamics of [Fe(bpy)(CN)4]2- in water, a strong Lewis acid solvent. The charge-transfer excited state is now found to decay in less than 100 femtoseconds, forming a quasi-stable metal centered excited state with a 13 picosecond lifetime. We find that this MC excited state has triplet (3MC) character, unlike other reported six-coordinate Fe(ii)-centered coordination compounds, which form MC quintet (5MC) states. The solvent dependent changes in excited state non-radiative relaxation for [Fe(bpy)(CN)4]2- allows us to infer the influence of the solvent on the electronic structure of the complex. Furthermore, the robust characterization of the dynamics and optical spectral signatures of the isolated 3MC intermediate provides a strong foundation for identifying 3MC intermediates in the electronic excited state relaxation mechanisms of similar Fe-centered systems being developed for solar applications.
|
|
| 8. |
- Kunnus, Kristjan, et al.
(författare)
-
Vibrational wavepacket dynamics in Fe carbene photosensitizer determined with femtosecond X-ray emission and scattering
- 2020
-
Ingår i: Nature Communications. - : Springer Nature. - 2041-1723. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- The non-equilibrium dynamics of electrons and nuclei govern the function of photoactive materials. Disentangling these dynamics remains a critical goal for understanding photoactive materials. Here we investigate the photoinduced dynamics of the [Fe(bmip)2]2+ photosensitizer, where bmip = 2,6-bis(3-methyl-imidazole-1-ylidine)-pyridine, with simultaneous femtosecond-resolution Fe Kα and Kβ X-ray emission spectroscopy (XES) and X-ray solution scattering (XSS). This measurement shows temporal oscillations in the XES and XSS difference signals with the same 278 fs period oscillation. These oscillations originate from an Fe-ligand stretching vibrational wavepacket on a triplet metal-centered (3MC) excited state surface. This 3MC state is populated with a 110 fs time constant by 40% of the excited molecules while the rest relax to a 3MLCT excited state. The sensitivity of the Kα XES to molecular structure results from a 0.7% average Fe-ligand bond length shift between the 1 s and 2p core-ionized states surfaces.
|
|
| 9. |
- Pallagi, Attila, et al.
(författare)
-
Multinuclear Complex Formation between Ca(II) and Gluconate Ions in Hyperalkaline Solutions
- 2014
-
Ingår i: Environmental Science & Technology. - : American Chemical Society (ACS). - 1520-5851 .- 0013-936X. ; 48:12, s. 6604-6611
-
Tidskriftsartikel (refereegranskat)abstract
- Alkaline solutions containing polyhydroxy carboxylates and Ca(II) are typical in cementitious radioactive waste repositories. Gluconate (Gluc(-)) is a structural and functional representative of these sugar carboxylates. In the current study, the structure and equilibria of complexes forming in such strongly alkaline solutions containing Ca2+ and gluconate have been studied. It was found that Gluc(-) significantly increases the solubility of portlandite (Ca(OH)(2)(s)) under these conditions and Ca2+ complexes of unexpectedly high stability are formed. The mononuclear (CaGluc(+) and [CaGlucOH](0)) complexes were found to be minor species, and predominant multinuclear complexes were identified. The formation of the neutral [Ca(2)Gluc(OH)(3)](0) (log beta(213) = 8.03) and [Ca(3)Gluc(2)(OH)(4)](0) (log beta(324) = 12.39) has been proven via H-2/Pt-electrode potentiometric measurements and was confirmed via XAS, H-1 NMR, ESI-MS, conductometry, and freezing-point depression experiments. The binding sites of Gluc- were identified from multinuclear NMR measurements. Besides the carboxylate group, the O atoms on the second and third carbon atoms were proved to be the most probable sites for Ca2+ binding. The suggested structure of the trinuclear complex was deduced from ab initio calculations. These observations are of relevance in the thermodynamic modeling of radioactive waste repositories, where the predominance of the binuclear Ca2+ complex, which is a precursor of various high-stability ternary complexes with actinides, is demonstrated.
|
|
| 10. |
- Persson, Ingmar, et al.
(författare)
-
Solution chemistry in the surface region of aqueous solutions
- 2020
-
Ingår i: Pure and Applied Chemistry. - : WALTER DE GRUYTER GMBH. - 0033-4545 .- 1365-3075. ; 92:10, s. 1553-1561
-
Tidskriftsartikel (refereegranskat)abstract
- Solution chemistry is commonly regarded as the physical chemistry of reactions and chemical equilibria taking place in the bulk of a solvent, and between solutes in solution, and solids or gases in contact with the solution. Our knowledge about such reactions and equilibria in aqueous solution is very detailed such as their physico-chemical constants at varying temperature, pressure, ionic medium and strength. In this paper the solution chemistry in the surface region of aqueous solutions, down to ca. 10 angstrom below the water-air interface, will be discussed. In this region, the density and relative permittivity are significantly smaller than in the aqueous bulk strongly affecting the chemical behaviour of solutes. Surface sensitive X-ray spectroscopic methods have recently been applicable on liquids and solutions by use of liquid jets. This allows the investigation of the speciation of compounds present in the water-air interface and the surface region, a region hardly studied before. Speciation studies show overwhelmingly that neutral molecules are accumulated in the surface region, while charged species are depleted from it. It has been shown that the equilibria between aqueous bulk, surface region, solids and/or air are very fast allowing effective transport of chemicals over the aqueous surface region.
|
|
