| 1. |
- Almora, Osbel, et al.
(författare)
-
Device Performance of Emerging Photovoltaic Materials (Version 1)
- 2020
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6832 .- 1614-6840. ; 11:11
-
Tidskriftsartikel (refereegranskat)abstract
- Emerging photovoltaics (PVs) focus on a variety of applications complementing large scale electricity generation. Organic, dye-sensitized, and some perovskite solar cells are considered in building integration, greenhouses, wearable, and indoor applications, thereby motivating research on flexible, transparent, semitransparent, and multi-junction PVs. Nevertheless, it can be very time consuming to find or develop an up-to-date overview of the state-of-the-art performance for these systems and applications. Two important resources for recording research cells efficiencies are the National Renewable Energy Laboratory chart and the efficiency tables compiled biannually by Martin Green and colleagues. Both publications provide an effective coverage over the established technologies, bridging research and industry. An alternative approach is proposed here summarizing the best reports in the diverse research subjects for emerging PVs. Best performance parameters are provided as a function of the photovoltaic bandgap energy for each technology and application, and are put into perspective using, e.g., the Shockley–Queisser limit. In all cases, the reported data correspond to published and/or properly described certified results, with enough details provided for prospective data reproduction. Additionally, the stability test energy yield is included as an analysis parameter among state-of-the-art emerging PVs.
|
|
| 2. |
- Gorenflot, Julien, et al.
(författare)
-
Increasing the Ionization Energy Offset to Increase the Quantum Efficiency in Non-Fullerene Acceptor-Based Organic Solar Cells: How Far Can We Go?
- 2023
-
Ingår i: Advanced Materials Interfaces. - : Wiley. - 2196-7350. ; In Press
-
Tidskriftsartikel (refereegranskat)abstract
- Molecular engineering of organic semiconductors provides a virtually unlimited number of possible structures, yet only a handful of combinations lead to state-of-the-art efficiencies in photovoltaic applications. Thus, design rules that guide material development are needed. One such design principle is that in a bulk heterojunction consisting of an electron donor and lower bandgap acceptor an offset (Delta IE) of at least 0.45 eV is required between both materials ionization energies to overcome energy level bending at the donor-acceptor interface, in turn maximizing the charge separation yield and the cell's internal quantum efficiency. The present work studies energy losses associated with Delta IE and, based on 24 blends, finds that losses are minimal up to a Delta IE of 0.6 eV. Electroluminescence spectroscopy shows that low energy losses are achieved when the charge transfer state energy (E-CT) is similar to the acceptor's optical bandgap (E-g(A)). Further Delta IE increase lowers E-CT with respect to E-g(A), thus decreasing V-OC. Within that 0.45-0.6 eV Delta IE sweet range, the fill factor FF, hence the power conversion efficiency, increases only marginally as the FF is often already close to maximal for Delta IE = 0.45 eV. The results are extended to 76 binary and ternary blends.
|
|
| 3. |
- Hultmark, Sandra, 1994, et al.
(författare)
-
Suppressing Co-Crystallization of Halogenated Non-Fullerene Acceptors for Thermally Stable Ternary Solar Cells
- 2020
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-3028 .- 1616-301X. ; 30:48
-
Tidskriftsartikel (refereegranskat)abstract
- While photovoltaic blends based on non-fullerene acceptors are touted for their thermal stability, this type of acceptor tends to crystallize, which can result in a gradual decrease in photovoltaic performance and affects the reproducibility of the devices. Two halogenated indacenodithienothiophene-based acceptors that readily co-crystallize upon mixing are studied, which indicates that the use of an acceptor mixture alone does not guarantee the formation of a disordered mixture. The addition of the donor polymer to the acceptor mixture readily suppresses the crystallization, which results in a fine-grained ternary blend with nanometer-sized domains that do not coarsen due to a high Tg ≈ 200 °C. As a result, annealing at temperatures of up to 170 °C does not markedly affect the photovoltaic performance of ternary devices, in contrast to binary devices that suffer from acceptor crystallization in the active layer. The results indicate that the ternary approach enables the use of high-temperature processing protocols, which are needed for upscaling and high-throughput fabrication of organic solar cells. Further, ternary devices display a stable photovoltaic performance at 130 °C for at least 205 h, which indicates that the use of acceptor mixtures allows to fabricate devices with excellent thermal stability.
|
|
| 4. |
- Liu, Jian, et al.
(författare)
-
Amphipathic Side Chain of a Conjugated Polymer Optimizes Dopant Location toward Efficient N-Type Organic Thermoelectrics
- 2021
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 33
-
Tidskriftsartikel (refereegranskat)abstract
- There is no molecular strategy for selectively increasing the Seebeck coefficient without reducing the electrical conductivity for organic thermoelectrics. Here, it is reported that the use of amphipathic side chains in an n-type donor-acceptor copolymer can selectively increase the Seebeck coefficient and thus increase the power factor by a factor of approximate to 5. The amphipathic side chain contains an alkyl chain segment as a spacer between the polymer backbone and an ethylene glycol type chain segment. The use of this alkyl spacer does not only reduce the energetic disorder in the conjugated polymer film but can also properly control the dopant sites away from the backbone, which minimizes the adverse influence of counterions. As confirmed by kinetic Monte Carlo simulations with the host-dopant distance as the only variable, a reduced Coulombic interaction resulting from a larger host-dopant distance contributes to a higher Seebeck coefficient for a given electrical conductivity. Finally, an optimized power factor of 18 mu W m(-1) K-2 is achieved in the doped polymer film. This work provides a facile molecular strategy for selectively improving the Seebeck coefficient and opens up a new route for optimizing the dopant location toward realizing better n-type polymeric thermoelectrics.
|
|
| 5. |
- Paleti, Sri Harish Kumar, et al.
(författare)
-
Correlating Acceptor Structure and Blend Nanostructure with the Photostability of Nonfullerene Organic Solar Cells
- 2022
-
Ingår i: Solar RRL. - : Wiley. - 2367-198X. ; 6:10
-
Tidskriftsartikel (refereegranskat)abstract
- The formation of photoinduced traps resulting in the loss of electron mobility deteriorates the performance of organic solar cells under continuous light soaking. The genesis of these loss mechanisms is elucidated by examining the structural stability of halogenated ITIC derivative films and the phase behavior of the respective binary systems by blending with the donor polymer PBDBT-2F. Under constant illumination, ITIC-4Cl is found to maintain its structural integrity, whereas fluorine on the peripheral moieties of ITIC-4F undergoes chemical substitution to form a mixture of ITIC and ITIC-4F. Thermal analysis of the light-soaked binary films reveals that ITIC-4Cl loses its crystalline phase while the crystallinity of ITIC-4F does not undergo changes. Further, it is shown that the addition of a small amount of ITIC-4F as a third component hinders the loss of ITIC-4Cl crystalline phase in bulk heterojunction blends through the formation of cocrystals. These results suggest that long-range ordering of NFAs does not necessarily improve the photostability of organic solar cells and that the addition of a third component, irrespective of the crystalline nature, can prevent changes in bulk heterojunction blend nanostructure.
|
|
| 6. |
- Paleti, Sri Harish Kumar, et al.
(författare)
-
Hexanary blends : a strategy towards thermally stable organic photovoltaics
- 2023
-
Ingår i: Nature Communications. - : Nature Publishing Group. - 2041-1723. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Non-fullerene based organic solar cells display a high initial power conversion efficiency but continue to suffer from poor thermal stability, especially in case of devices with thick active layers. Mixing of five structurally similar acceptors with similar electron affinities, and blending with a donor polymer is explored, yielding devices with a power conversion efficiency of up to 17.6%. The hexanary device performance is unaffected by thermal annealing of the bulk-heterojunction active layer for at least 23 days at 130 °C in the dark and an inert atmosphere. Moreover, hexanary blends offer a high degree of thermal stability for an active layer thickness of up to 390 nm, which is advantageous for high-throughput processing of organic solar cells. Here, a generic strategy based on multi-component acceptor mixtures is presented that permits to considerably improve the thermal stability of non-fullerene based devices and thus paves the way for large-area organic solar cells.
|
|
| 7. |
- Xu, Han, et al.
(författare)
-
Dissecting the structure-stability relationship of Y-series electron acceptors for real-world solar cell applications
- 2023
-
Ingår i: Joule. - 2542-4351. ; 7:9, s. 2135-2151
-
Tidskriftsartikel (refereegranskat)abstract
- Despite striking progress toward improving the photovoltaic (PV) performance of organic solar cells (OSCs) with recent Y-series non-fullerene acceptors (Y-NFAs), knowledge about their outdoor performance under real-world conditions and photodegradation mechanisms remains elusive, which is urgently needed to close the lab-to-fab gap of OSCs. Herein, for the first time, we study the structure-outdoor-stability relationship of Y-NFAs. We show that Y-NFAs with long internal side-chains exhibit high energy barriers for photoisomerization, and fluorinated end-groups can enhance the structural confinement to inhibit the photodegradation pathway and thereby improve device stability. Furthermore, the performance loss of Y-NFA-based OSCs under illumination is mainly driven by increased trap-assisted recombination over time. The structure-stability correlation and demonstration of outdoor performance of these state-of-the-art Y-NFA cells provided in this study highlight molecular engineering of device stability control to minimize power output losses in real-world climates.
|
|
| 8. |
|
|
| 9. |
- Zheng, Xiaopeng, et al.
(författare)
-
Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells
- 2020
-
Ingår i: NATURE ENERGY. - : Nature Publishing Group. - 2058-7546. ; 5, s. 131-140
-
Tidskriftsartikel (refereegranskat)abstract
- Inverted perovskite solar cells have attracted increasing attention because they have achieved long operating lifetimes. However, they have exhibited significantly inferior power conversion efficiencies compared to regular perovskite solar cells. Here we reduce this efficiency gap using a trace amount of surface-anchoring alkylamine ligands (AALs) with different chain lengths as grain and interface modifiers. We show that long-chain AALs added to the precursor solution suppress nonradiative carrier recombination and improve the optoelectronic properties of mixed-cation mixed-halide perovskite films. The resulting AAL surface-modified films exhibit a prominent (100) orientation and lower trap-state density as well as enhanced carrier mobilities and diffusion lengths. These translate into a certified stabilized power conversion efficiency of 22.3% (23.0% power conversion efficiency for lab-measured champion devices). The devices operate for over 1,000 h at the maximum power point under simulated AM1.5 illumination, without loss of efficiency. While perovskite solar cells with an inverted architecture hold great promise for operation stability, their power conversion efficiency lags behind that of conventional cells. Here, Zheng et al. achieve a certified 22.34% efficiency, exploiting alkylamine ligands as grain and interface modifiers.
|
|
