| 1. |
- Bentzel, Grady W., et al.
(författare)
-
High-Temperature Neutron Diffraction, Raman Spectroscopy, and First-Principles Calculations of Ti3SnC2 and Ti2SnC
- 2016
-
Ingår i: Journal of The American Ceramic Society. - : WILEY-BLACKWELL. - 0002-7820 .- 1551-2916. ; 99:7, s. 2233-2242
-
Tidskriftsartikel (refereegranskat)abstract
- Herein, we report-for the first time-on the additive-free bulk synthesis of Ti3SnC2. A detailed experimental study of the structure of the latter together with a secondary phase, Ti2SnC, is presented through the use of X-ray diffraction (XRD), and high-resolution transmission microscopy (HRTEM). A previous sample of Ti3SnC2, made using Fe as an additive and Ti2SnC as a secondary phase, was studied by high-temperature neutron diffraction (HTND) and XRD. The room-temperature crystallographic parameters of the two MAX phases in the two samples are quite similar. Based on Rietveld analysis of the HTND data, the average linear thermal expansion coefficients of Ti3SnC2 in the a and c directions were found to be 8.5 (2).10(-6) K-1 and 8.9 (1) . 10(-6) K-1, respectively. The respective values for the Ti2SnC phase are 10.1 (3) . 10(-6) K-1 and 10.8 (6) . 10(-6) K-1. Unlike other MAX phases, the atomic displacement parameters of the Sn atoms in Ti3SnC2 are comparable to those of the Ti and C atoms. When the predictions of the atomic displacement parameters obtained from density functional theory are compared to the experimental results, good quantitative agreement is found for the Sn atoms. In the case of the Ti and C atoms, the agreement is more qualitative. We also used first principles to calculate the elastic properties of both Ti2SnC and Ti3SnC2 and their Raman active modes. The latter are compared to experiment and the agreement was found to be good.
|
|
| 2. |
- Cabioch, Thierry, et al.
(författare)
-
Tailoring of the thermal expansion of Cr2(Alx,Ge1−x)C phases
- 2013
-
Ingår i: Journal of the European Ceramic Society. - : Elsevier. - 0955-2219 .- 1873-619X. ; 33:4, s. 897-904
-
Tidskriftsartikel (refereegranskat)abstract
- We report thermal expansion coefficients of the end members and solid-solution compounds in the Cr2(Alx,Ge1−x)C system. All samples studied were essentially phase-pure Cr2AlxGe1−xC except the Cr2GeC sample, which contained a substantial fraction of Cr5Ge3Cx. X-ray diffraction performed in the 25–800 °C temperature range shows that the in-plane thermal expansion remains essentially constant at about 14 ± 1 × 10−6 K−1 irrespective of Al content. The thermal expansion of the c axis decreases monotonically from 17 ± 1 × 10−6 K−1 for Cr2GeC to ∼12 ± 1 × 10−6 K−1 with increasing Al content. At around the Cr2(Al0.75,Ge0.25)C composition, the thermal expansion coefficients along the two directions are equal; a useful property to minimize thermal residual stresses. This study thus demonstrates that a solid-solution approach is a route for tuning a physical property like the thermal expansion. For completeness, we also include a structure description of the Cr5Ge3Cx phase, which has been reported before but is not well documented. Its space group is P63/mcm and its a and c lattice parameters are 7.14 Å and 4.88 Å, respectively. We also measured the thermal expansion coefficients of the Cr5Ge3Cx phase. They are found to be 16.3 × 10−6 K−1 and 28.4 × 10−6 K−1 along the a and c axes, respectively. Thus, the thermal expansion coefficients of Cr5Ge3Cx are highly anisotropic and considerably larger than those of the Cr2(Alx,Ge1−x)C phases.
|
|
| 3. |
- Ghidiu, Michael, et al.
(författare)
-
Alkylammonium Cation Intercalation into Ti3C2 (MXene): Effects on Properties and Ion-Exchange Capacity Estimation
- 2017
-
Ingår i: Chemistry of Materials. - : AMER CHEMICAL SOC. - 0897-4756 .- 1520-5002. ; 29:3, s. 1099-1106
-
Tidskriftsartikel (refereegranskat)abstract
- Ti3C2Tx MXene intercalated with Li+ ions was produced and ion-exchanged with a series of trimethylalkylammonium (AA) cations of increasing alkyl chain length. A discontinuous expansion in the MXene layer spacing was observed, attributed to complete packing of the interlayer space at a critical chain length. The latter was used to estimate the number of cations per Ti3C2 formula unit, which was found to be in good agreement with a similar quantification obtained from X-ray photoelectron spectroscopy, energy-dispersive spectroscopy, and elemental analysis. The system was also modeled using density functional theory and molecular dynamics, arriving at cation concentrations in the same range. The intercalated AA cations led to tunable increases in resistivity of the normally highly electrically conductive MXene and were investigated as interlayer pillars in electrochemical capacitors.
|
|
| 4. |
- Anasori, Babak, et al.
(författare)
-
A Tungsten-Based Nanolaminated Ternary Carbide: (W,Ti)(4)C4-x
- 2019
-
Ingår i: Inorganic Chemistry. - : AMER CHEMICAL SOC. - 0020-1669 .- 1520-510X. ; 58:2, s. 1100-1106
-
Tidskriftsartikel (refereegranskat)abstract
- Nanolamellar transition metal carbides are gaining increasing interests because of the recent developments of their twodimensional (2D) derivatives and promising performance for a variety of applications from energy storage, catalysis to transparent conductive coatings, and medicine. To develop more novel 2D materials, new nanolaminated structures are needed. Here we report on a tungsten based nanolaminated ternary phase, (W,Ti)(4)C4-x, synthesized by an Al catalyzed reaction of W, Ti, and C powders at 1600 degrees C for 4 h, under flowing argon. X-ray and neutron diffraction, along with Z-contrast scanning transmission electron microscopy, were used to determine the atomic structure, ordering, and occupancies. This phase has a layered hexagonal structure (P6(3)/mmc) with lattice parameters, a = 3.00880(7) angstrom, and c = 19.5633(6) angstrom and a nominal chemistry of (W,Ti)(4)C4-x (actual chemistry, W2.1(1)Ti1.6(1)C2.6(1)). The structure is comprised of layers of pure W that are also twin planes with two adjacent atomic layers of mixed W and Ti, on either side. The use of Al as a catalyst for synthesizing otherwise difficult to make phases, could in turn lead to the discovery of a large family of nonstoichiometric ternary transition metal carbides, synthesized at relatively low temperatures and shorter times.
|
|
| 5. |
- Anasori, Babak, et al.
(författare)
-
Experimental and theoretical characterization of ordered MAX phases Mo2TiAlC2 and Mo2Ti2AlC3
- 2015
-
Ingår i: Journal of Applied Physics. - : AMER INST PHYSICS. - 0021-8979 .- 1089-7550. ; 118:9, s. 094304-
-
Tidskriftsartikel (refereegranskat)abstract
- Herein, we report on the phase stabilities and crystal structures of two newly discovered ordered, quaternary MAX phases-Mo2TiAlC2 and Mo2Ti2AlC3-synthesized by mixing and heating different elemental powder mixtures of mMo:(3-m) Ti:1.1Al:2C with 1.5 less than= m less than= 2.2 and 2Mo: 2Ti:1.1Al:2.7C to 1600 degrees C for 4 h under Ar flow. In general, for m greater than= 2 an ordered 312 phase, (Mo2Ti) AlC2, was the majority phase; for mless than 2, an ordered 413 phase (Mo2Ti2)AlC3, was the major product. The actual chemistries determined from X-ray photoelectron spectroscopy (XPS) are Mo2TiAlC1.7 and Mo2Ti1.9Al0.9C2.5, respectively. High resolution scanning transmission microscopy, XPS and Rietveld analysis of powder X-ray diffraction confirmed the general ordered stacking sequence to be Mo-Ti-Mo-Al-Mo-Ti-Mo for Mo2TiAlC2 and Mo-Ti-Ti-Mo-Al-Mo-Ti-Ti-Mo for Mo2Ti2AlC3, with the carbon atoms occupying the octahedral sites between the transition metal layers. Consistent with the experimental results, the theoretical calculations clearly show that M layer ordering is mostly driven by the high penalty paid in energy by having the Mo atoms surrounded by C in a face-centered configuration, i.e., in the center of the Mn+1Xn blocks. At 331 GPa and 367 GPa, respectively, the Youngs moduli of the ordered Mo2TiAlC2 and Mo2Ti2AlC3 are predicted to be higher than those calculated for their ternary end members. Like most other MAX phases, because of the high density of states at the Fermi level, the resistivity measurement over 300 to 10K for both phases showed metallic behavior. (C) 2015 AIP Publishing LLC.
|
|
| 6. |
- Anasori, Babak, et al.
(författare)
-
Mo2TiAlC2: A new ordered layered ternary carbide
- 2015
-
Ingår i: Scripta Materialia. - : Elsevier. - 1359-6462 .- 1872-8456. ; 101, s. 5-7
-
Tidskriftsartikel (refereegranskat)abstract
- Herein we report on the synthesis of a new layered ternary carbide, Mo2TiAlC2, that was synthesized by heating an elemental mixture at 1600 degrees C for 4 h under an Ar flow. Its hexagonal, a and c lattice parameters were calculated via Rietveld analysis of powder X-ray diffraction patterns to be, respectively, 2.997 angstrom and 18.661 angstrom. High-resolution scanning transmission electron microscopy showed that this phase is ordered, with Ti layers sandwiched between two Mo layers in a M(3)AX(2) type ternary carbide structure. (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
|
|
| 7. |
- Anasori, Babak, et al.
(författare)
-
Two-Dimensional, Ordered, Double Transition Metals Carbides (MXenes)
- 2015
-
Ingår i: ACS Nano. - : AMER CHEMICAL SOC. - 1936-0851 .- 1936-086X. ; 9:10, s. 9507-9516
-
Tidskriftsartikel (refereegranskat)abstract
- The higher the chemical diversity and structural complexity of two-dimensional (2D) materials, the higher the likelihood they possess unique and useful properties. Herein, density functional theory (DFT) is used to predict the existence of two new families of 2D ordered, carbides (MXenes), MM-2 C-2 and MM-2 C-2(3), where M and M are two different early transition metals. In these solids, M layers sandwich M" carbide layers. By synthesizing Mo2TiC2Tx, Mo2Ti2C3Tx, and Cr2TiC2Tx (where T is a surface termination), we validated the DFT predictions. Since the Mo and Cr atoms are on the outside, they control the 2D flakes chemical and electrochemical properties. The latter was proven by showing quite different electrochemical behavior of Mo2TiC2Tx and Ti3C2Tx. This work further expands the family of 2D materials, offering additional choices of structures, chemistries, and ultimately useful properties.
|
|
| 8. |
- Byeon, Ayeong, et al.
(författare)
-
Two-Dimensional Titanium Carbide MXene As a Cathode Material for Hybrid Magnesium/Lithium-Ion Batteries
- 2017
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 9:5, s. 4296-4300
-
Tidskriftsartikel (refereegranskat)abstract
- As an alternative to pure lithium-ion, Lit, systems, a hybrid magnesium, Mg2+, and Li+ battery can potentially combine the high capacity, high voltage, and fast Li+ intercalation of Li-ion battery cathodes and the high capacity, low cost, and dendrite-free Mg metal anodes. Herein, we report on the use of two-dimensional titanium carbide, Ti3C2Tx (MXene), as a cathode in hybrid Mg2+/Li+ batteries, coupled with a Mg metal anode. Free-standing and flexible Ti3C2Tx/carbon nanotube composite "paper" delivered-,100 mAh at 0.1 C and similar to 50 mAh g(-1) at 10 C. At 1 C the capacity was maintained for amp;gt;500 cycles at 80 mAh g(-1). The Mo2CTx MXene also demonstrated good performance as a cathode material in this hybrid battery. Considering the variety of available MXenes, this work opens the door for exploring a new large family of 2D materials with high electrical conductivity and large intercalation capacity as cathodes for hybrid Mg2+/Li+ batteries.
|
|
| 9. |
- Eklund, Per, et al.
(författare)
-
Homoepitaxial growth of Ti-Si-C MAX-phase thin films on bulk Ti3SiC2 substrates
- 2007
-
Ingår i: Journal of Crystal Growth. - : Elsevier BV. - 0022-0248 .- 1873-5002. ; 304:1, s. 264-269
-
Tidskriftsartikel (refereegranskat)abstract
- Ti3SiC2 films were grown on polycrystalline Ti3SiC2 bulk substrates using DC magnetron sputtering. The crystallographic orientation of the film grains is shown to be determined by the respective substrate-grain orientation through homoepitaxial MAX-phase growth. For a film composition close to Ti:Si:C=3:1:2, the films predominantly consist of MAX phases, both Ti3SiC2 and the metastable Ti4SiC3. Lower Si content resulted in growth of TiC with Ti3SiC2 as a minority phase. Thus, MAX-phase heterostructures with preferred crystallographic relationships can also be realized.
|
|
| 10. |
- Haddad, Noël, et al.
(författare)
-
Dielectric properties of Ti2AlC and Ti2AlN MAX phases : The conductivity anisotropy
- 2008
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 104:2
-
Tidskriftsartikel (refereegranskat)abstract
- The optical properties of Ti2AlN and Ti2AlC were determined in the 2-80 eV energy range by electron energy loss spectroscopy and in the visible-ultraviolet range, from 1.6 to 5.5 eV, by spectroscopic ellipsometry. Both experimental techniques are angular resolved and in very good agreement over their overlapping energy range. We observe a dependence of the dielectric function as a function of the crystallographic orientation of the crystals. In particular, we notice a shift of the energy position of the plasmon absorption of Ti2AlC with respect to Ti2AlN. Moreover, a drastic change is also observed in the shape of the dielectric function as a function of the composition (or valence electron concentration). The dielectric functions are fitted to an empirical semiclassic Drude-Lorentz model to obtain physical parameters such as the relaxation times. These microscopic parameters are then used in a macroscopic model to yield the transport properties such as the static conductivity as function of the crystal orientation. Ti 2AlN is found to be a better conductor than Ti2AlC in all orientations, which is consistent with experimental measurements. A comparison of the electrical and optical properties of these two compounds is made in terms of different electronic properties and interband-intraband transitions deduced from our model. © 2008 American Institute of Physics.
|
|
