| 1. |
- Patterson, Nick, et al.
(author)
-
Large-scale migration into Britain during the Middle to Late Bronze Age
- 2022
-
In: Nature. - : Nature Publishing Group. - 0028-0836 .- 1476-4687. ; , s. 588-594
-
Journal article (peer-reviewed)abstract
- Present-day people from England and Wales harbour more ancestry derived from Early European Farmers (EEF) than people of the Early Bronze Age1. To understand this, we generated genome-wide data from 793 individuals, increasing data from the Middle to Late Bronze and Iron Age in Britain by 12-fold, and Western and Central Europe by 3.5-fold. Between 1000 and 875 BC, EEF ancestry increased in southern Britain (England and Wales) but not northern Britain (Scotland) due to incorporation of migrants who arrived at this time and over previous centuries, and who were genetically most similar to ancient individuals from France. These migrants contributed about half the ancestry of Iron Age people of England and Wales, thereby creating a plausible vector for the spread of early Celtic languages into Britain. These patterns are part of a broader trend of EEF ancestry becoming more similar across central and western Europe in the Middle to Late Bronze Age, coincident with archaeological evidence of intensified cultural exchange2-6. There was comparatively less gene flow from continental Europe during the Iron Age, and Britain's independent genetic trajectory is also reflected in the rise of the allele conferring lactase persistence to ~50% by this time compared to ~7% in central Europe where it rose rapidly in frequency only a millennium later. This suggests that dairy products were used in qualitatively different ways in Britain and in central Europe over this period.
|
|
| 2. |
- Rodushkin, Ilya, et al.
(author)
-
Authentication of Kalix (NE Sweden) vendace caviar using inductively coupled plasma-based analytical techniques : evaluation of different approaches
- 2007
-
In: Analytica Chimica Acta. - : Elsevier BV. - 0003-2670 .- 1873-4324. ; 583:2, s. 310-318
-
Journal article (peer-reviewed)abstract
- Different analytical approaches for origin differentiation between vendace and whitefish caviars from brackish- and freshwaters were tested using inductively coupled plasma double focusing sector field mass spectrometry (ICP-SFMS) and multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). These approaches involve identifying differences in elemental concentrations or sample-specific isotopic composition (Sr and Os) variations. Concentrations of 72 elements were determined by ICP-SFMS following microwave-assisted digestion in vendace and whitefish caviar samples from Sweden (from both brackish and freshwater), Finland and USA, as well as in unprocessed vendace roe and salt used in caviar production. This data set allows identification of elements whose contents in caviar can be affected by salt addition as well as by contamination during production and packaging. Long-term method reproducibility was assessed for all analytes based on replicate caviar preparations/analyses and variations in element concentrations in caviar from different harvests were evaluated. The greatest utility for differentiation was demonstrated for elements with varying concentrations between brackish and freshwaters (e.g. As, Br, Sr). Elemental ratios, specifically Sr/Ca, Sr/Mg and Sr/Ba, are especially useful for authentication of vendace caviar processed from brackish water roe, due to the significant differences between caviar from different sources, limited between-harvest variations and relatively high concentrations in samples, allowing precise determination by modern analytical instrumentation. Variations in the 87Sr/86Sr ratio for vendace caviar from different harvests (on the order of 0.05-0.1%) is at least 10-fold less than differences between caviar processed from brackish and freshwater roe. Hence, Sr isotope ratio measurements (either by ICP-SFMS or by MC-ICP-MS) have great potential for origin differentiation. On the contrary, it was impossible to differentiate between Swedish caviar processed from brackish water roe and Finnish freshwater caviar based solely on 187Os/188Os ratios.
|
|
| 3. |
- Niemi, MEK, et al.
(author)
-
- 2021
-
swepub:Mat__t
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Andren, Henrik, et al.
(author)
-
Sources of mass bias and isotope ratio variation in multi-collector ICP-MS : optimization of instrumental parameters based on experimental observations
- 2004
-
In: Journal of Analytical Atomic Spectrometry. - : Royal Society of Chemistry (RSC). - 0267-9477 .- 1364-5544. ; 19:9, s. 1217-1224
-
Journal article (peer-reviewed)abstract
- In this work, several contributing factors to the observed mass bias in inductively coupled plasma mass spectrometry (ICP-MS) have been identified. Analyses of the isotopic compositions of B deposited on sampler and skimmer cones demonstrate enrichment of [1][0]B on the former and [1][1]B on the latter. Grounding the capacitive discharge system to enhance sensitivity also magnified the level of [1][1]B enrichment on the skimmer cone more than four-fold. This supersonic expansion of the ion beam behind the sampler is confirmed to be an important source of mass bias. Isotopic analyses of the Fe, Zn and Ti leached from used extraction lenses yielded a linear relationship between the levels of lighter isotope depletion and mass ratio. Although consistent with the space-charge effect, the fact that isotopically-heavy deposits were found demonstrates that the ion beam diverges into a relatively wide solid angle in the field-free region behind the skimmer. This severely impairs transmission of, in particular, the lighter isotopes. For a wide range of elements (Li, B, Fe, Ni, Cu, Sb, Ce, Hf and Re), the magnitude of the mass bias was found to be affected by the sample gas flow rate, as well as the distance between the sampler and the end of the torch, i.e., the sampling depth, employed in the Neptune multi-collector ICP-MS instrument. Mathematical analysis of the profiles of intensity variations as a function of these instrumental parameters revealed that the response peaks closer to the torch for the heavier isotopes of all studied elements. Owing to this spatial non-coincidence, tuning for maximum intensity on either isotope will result in sampling from a region where even slight plasma instabilities will be translated into substantial variations in mass bias. Therefore, in-plasma processes also contribute to the degree and temporal stability of mass bias. In light of these findings, recommendations for optimizing multi-collector ICP-MS with respect to obtaining the highest possible precision are presented.
|
|
| 8. |
|
|
| 9. |
- Appelblad, Petra K., et al.
(author)
-
Determination of metal-humic complexes, free metal ions and total concentrations in natural waters
- 1999
-
In: Journal of Environmental Monitoring. - 1464-0325 .- 1464-0333. ; 1:3, s. 211-217
-
Journal article (peer-reviewed)abstract
- A comparison of two systems for the quantitation of metal-humic complexes and free metal ions, consisting of the separation by coupled ion exchange columns followed by detection by inductively coupled plasma mass spectrometry or cold vapour atomic fluorescence spectrometry, is presented. The systems evaluated comprised the serially coupled anion and cation exchangers, Sephadex A-25/Chelex 100 and Dowex 1X8/Chelamine Metalfix. Separation and preconcentration of the species studied were accomplished with both systems, elution being carried out using 2 M HNO3. Total concentrations, metal-humic complex fractions and free metal ion fractions of Al, Ba, Cd, Co, Cu, Fe, Hg, Mn, Pb, Sr, U and Zn in nine natural waters were determined. Statistical evaluation of the data from the two cation exchange materials, including results for additional elements, showed better precision (for Al, Ba, Cr, Cu and Mo) and higher recoveries (Al, Ba, Cd, Fe, Sr and Zn) for Chelex 100 than Chelamine Metalfix for free metal ions. On the other hand, Chelamine Metalfix recovered a significantly greater amount of Ni. The amounts of metal-humic complexes were compared with modelled distributions of these species, and one advantage of the preferred Sephadex A-25/Chelex 100 system is that the elements studied are all correctly classified with respect to their binding strengths to humic substances, which is not the case with the Dowex 1X8/Chelamine Metalfix pair. With the preferred system, metal-humic complexes can be reliably determined, as indicated by the results of equilibrium speciation modelling. However, comparison with the total concentrations showed statistically significant, non-quantitative recoveries of Al, Cu, Hg, Mn, U and Zn from some samples. Thus a combination of speciation and total concentration measurements is required to obtain a complete representation of the distribution of trace elements in natural waters.
|
|
| 10. |
- Appelblad, P.K., et al.
(author)
-
Sources of uncertainty in isotope ratio measurements by inductively coupled plasma mass spectrometry
- 2001
-
In: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 73:13, s. 2911-2919
-
Journal article (peer-reviewed)abstract
- A model is presented describing the effects of dead time and mass bias correction factor uncertainties, flicker noise, and counting statistics on isotope ratio measurement precision using inductively coupled plasma mass spectrometry (ICPMS) with a single collector. Noise spectral analysis is exploited to enable estimation of the flicker noise parameters. For the instrument used, the flicker noise component exhibited a fairly weak frequency (f) dependence ( f -0.33±0.12), but was directly proportional to the total number of counts, Q. As white noise, determined by counting statistics, is given by Q0.5, the isotope ratio measurement uncertainties will actually cease to improve when Q exceeds a certain threshold. This would suggest that flicker noise could become the limiting factor for the precision with which isotope ratios can be determined by ICPMS. However, under most experimental conditions, uncertainties associated with mass discrimination and dead time correction factors are decisive. For ratios up to ~22 (115In/113In), optimum major isotope count rates are generally below 0.3 MHz, for which precision in the mass discrimination factor is limiting. The model derived could be used as a starting point for determining optimum conditions and understanding the limitations of single-collector ICPMS for precise isotope ratio measurements.
|
|
