| 1. |
- Ali, Amjad, et al.
(författare)
-
A potential electrolyte (Ce1-x CaxO2-delta) for fuel cells:Theoretical andexperimental study
- 2018
-
Ingår i: Ceramics International. - : ELSEVIER SCI LTD. - 0272-8842 .- 1873-3956. ; 44:11, s. 12676-12683
-
Tidskriftsartikel (refereegranskat)abstract
- First-principles calculations are performed using density function theory to explore the effects of dopant Ca in ceria (Ce1-x CaxO2-delta). The impact of oxygen vacancy on band gap and density of states is examined in doped ceria using generalized gradient approximations. Vacancy association and vacancy formation energies of the doped ceria are calculated to reveal the effect of dopant on ion conduction. The experimental study of the sample Ce0.875Ca0.125O2-delta) was performed to compare with the theoretical results. The obtained results from theoretical calculation and experimental techniques show that oxygen vacancy increases the volume, lattice constant (5.47315 angstrom) but decrease the band gap (1.72 eV) and bulk modulus. The dopant radius (1.173 angstrom) and lattice constant (5.4718 angstrom) are also calculated by equations which is close to the DFT lattice parameter. The result shows that oxygen vacancy shifts the density of states to lower energy region. Band gap is decreased due to shifting of valence states to conduction band. Vacancy formation shows a significance increase in density of states near the Fermi level. Density of states at Fermi level is proportional to the conductivity, so an increase in density of states near the Fermi level increases the conductivity. The experimental measured ionic conductivity is found to 0.095 S cm(-1) at 600 degrees C. The microstructural studies is also reported in this work.
|
|
| 2. |
- Ali, Amjad, et al.
(författare)
-
Electrochemical study of composite materials for coal-based direct carbon fuel cell
- 2018
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 43:28, s. 12900-12908
-
Tidskriftsartikel (refereegranskat)abstract
- The efficient conversion of solid carbon fuels into energy by reducing the emission of harmful gases is important for clean environment. In this regards, direct carbon fuel cell (DCFC) is a system that converts solid carbon directly into electrical energy with high thermodynamic efficiency (100%), system efficiency of 80% and half emission of gases compared to conventional coal power plants. This can generate electricity from any carbonaceous fuel such as charcoal, carbon black, carbon fiber, graphite, lignite, bituminous coal and waste materials. In this paper, ternary carbonate-samarium doped ceria (LNK-SDC) electrolyte has been synthesized via co-precipitation technique, while LiNi-CuZnFeO (LNCZFO) electrode has been prepared using solid state reaction method. Due to significant ionic conductivity of electrolyte LNK-SDC, it is used in DCFC. Three types of solid carbon (lignite, bituminous, sub-bituminous) are used as fuel to generate power. The X-ray diffraction confirmed the cubic crystalline structure of samarium doped ceria, whereas XRD pattern of LNCZFO showed its composite structure. The proximate and ultimate coal analysis showed that fuel (carbon) with higher carbon content and lower ash content was promising fuel for DCFC. The measured ionic conductivity of LNK-SDC is 0.0998 Scm(-1) and electronic conductivity of LNCZFO is 10.1 Scm(-1) at 700 degrees C, respectively. A maximum power density of 58 mWcm(-2) is obtained using sub bituminous fuel.
|
|
| 3. |
- Araujo, Carlos Moyses, et al.
(författare)
-
Disorder-induced Room Temperature Ferromagnetism in Glassy Chromites
- 2014
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 4, s. 4686-
-
Tidskriftsartikel (refereegranskat)abstract
- We report an unusual robust ferromagnetic order above room temperature upon amorphization of perovskite [YCrO3] in pulsed laser deposited thin films. This is contrary to the usual expected formation of a spin glass magnetic state in the resulting disordered structure. To understand the underlying physics of this phenomenon, we combine advanced spectroscopic techniques and first-principles calculations. We find that the observed order-disorder transformation is accompanied by an insulator-metal transition arising from a wide distribution of Cr-O-Cr bond angles and the consequent metallization through free carriers. Similar results also found in YbCrO3-films suggest that the observed phenomenon is more general and should, in principle, apply to a wider range of oxide systems. The ability to tailor ferromagnetic order above room temperature in oxide materials opens up many possibilities for novel technological applications of this counter intuitive effect.
|
|
| 4. |
- Araujo, C. Moysés, et al.
(författare)
-
Room temperature ferromagnetism in pristine MgO thin films
- 2010
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 96:23
-
Tidskriftsartikel (refereegranskat)abstract
- Robust ferromagnetic ordering at, and well above room temperature is observed in pure transparent MgO thin films (<170 nm thick) deposited by three different techniques. Careful study of the wide scan x-ray photoelectron spectroscopy rule out the possible presence of any magnetic contaminants. In the magnetron sputtered films, we observe magnetic phase transitions as a function of film thickness. The maximum saturation magnetization of 5.7 emu/cm(3) is measured on a 170 nm thick film. The films above 500 nm are found to be diamagnetic. Ab initio calculations suggest that the ferromagnetism is mediated by cation vacancies.
|
|
| 5. |
|
|
| 6. |
- Bagchi, Sonchita, et al.
(författare)
-
Intermediate filament-like proteins in bacteria and a cytoskeletal function in Streptomyces
- 2008
-
Ingår i: Molecular Microbiology. - : Wiley. - 0950-382X .- 1365-2958. ; 70:4, s. 1037-1050
-
Tidskriftsartikel (refereegranskat)abstract
- Actin and tubulin cytoskeletons are conserved and widespread in bacteria. A strikingly intermediate filament (IF)-like cytoskeleton, composed of crescentin, is also present in Caulobacter crescentus and determines its specific cell shape. However, the broader significance of this finding remained obscure, because crescentin appeared to be unique to Caulobacter. Here we demonstrate that IF-like function is probably a more widespread phenomenon in bacteria. First, we show that 21 genomes of 26 phylogenetically diverse species encoded uncharacterized proteins with a central segmented coiled coil rod domain, which we regarded as a key structural feature of IF proteins and crescentin. Experimental studies of three in silico predicted candidates from Mycobacterium and other actinomycetes revealed a common IF-like property to spontaneously assemble into filaments in vitro. Furthermore, the IF-like protein FilP formed cytoskeletal structures in the model actinomycete Streptomyces coelicolor and was needed for normal growth and morphogenesis. Atomic force microscopy of living cells revealed that the FilP cytoskeleton contributed to mechanical fitness of the hyphae, thus closely resembling the function of metazoan IF. Together, the bioinformatic and experimental data suggest that an IF-like protein architecture is a versatile design that is generally present in bacteria and utilized to perform diverse cytoskeletal tasks.
|
|
| 7. |
- Banuazizi, Seyed Amir Hossein, et al.
(författare)
-
Magnetic force microscopy of an operational nanodevice
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- We present a new method for probing the spatial profile of an operational magnetic nanodevice using magnetic force microscopy (MFM). We have developed an MFM system by adding a microwave probe station equipped with microwave probe, bias-T, and amplifier to allow electrical and microwave characterization up to 40 GHz during the MFM process. The nanoscale spintronic devices---spin Hall nano-oscillators (SHNOs) based on Pt/NiFe bilayers with a specific design compatible with the developed system---were fabricated and scanned using a Co magnetic force microscopy tip with 10 nm spatial resolution, while a DC current sufficient to exert auto-oscillation flowed. Our results show that this method of developed provides a promising path for the characterization of the spatial profiles of operational nano-oscillators.
|
|
| 8. |
- Banuazizi, S. Amir Hossein, et al.
(författare)
-
Magnetic force microscopy of an operational spin nano-oscillator
- 2022
-
Ingår i: Microsystems & Nanoengineering. - : Springer Science and Business Media LLC. - 2055-7434. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- Magnetic force microscopy (MFM) is a powerful technique for studying magnetic microstructures and nanostructures that relies on force detection by a cantilever with a magnetic tip. The detected magnetic tip interactions are used to reconstruct the magnetic structure of the sample surface. Here, we demonstrate a new method using MFM for probing the spatial profile of an operational nanoscale spintronic device, the spin Hall nano-oscillator (SHNO), which generates high-intensity spin wave auto-oscillations enabling novel microwave applications in magnonics and neuromorphic computing. We developed an MFM system by adding a microwave probe station to allow electrical and microwave characterization up to 40 GHz during the MFM process. SHNOs-based on NiFe/Pt bilayers with a specific design compatible with the developed system-were fabricated and scanned using a Co magnetic force microscopy tip with 10 nm spatial MFM resolution, while a DC current sufficient to induce auto-oscillation flowed. Our results show that this developed method provides a promising path for the characterization and nanoscale magnetic field imaging of operational nano-oscillators.
|
|
| 9. |
- Belova, Lyubov M., et al.
(författare)
-
Rapid electron beam assisted patterning of pure cobalt at elevated temperatures via seeded growth
- 2011
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 22:14, s. 145305-
-
Tidskriftsartikel (refereegranskat)abstract
- A new method of direct, rapid nano- to micro-scale patterning of high purity cobalt is presented. The method utilizes a combination of electron beam induced deposition (EBID) and seeded growth at elevated temperatures below the temperature of spontaneous thermal decomposition. Dicobalt octacarbonyl Co-2(CO)(8) is used as the precursor and carbon as a seed layer. Seeded deposition is carried out in the substrate temperature range from 55 to 75 degrees C. Deposition yield is significantly higher than conventional EBID and magnetotransport measurements indicate that resistivity, 22 mu Omega cm, and saturation magnetization, 1.55 T, are much closer to the corresponding values for bulk Co than those for standard EBID.
|
|
| 10. |
- Bhatt, Pramod, et al.
(författare)
-
Ferromagnetism above room temperature in nickel-tetracyanoethylene thin films
- 2009
-
Ingår i: Journal of Materials Chemistry. - : Royal Society of Chemistry (RSC). - 0959-9428 .- 1364-5501. ; 19:36, s. 6610-6615
-
Tidskriftsartikel (refereegranskat)abstract
- Room temperature ferromagnetic ordering is reported in Ni-tetracyanoethylene (TCNE) thin films fabricated on Au substrates using physical vapor deposition (PVD) under ultra high vacuum conditions. This technique enables the preparation of very clean films without having any kind of contamination from oxygen-containing species, solvents or precursor molecules. Film stoichiometry was obtained from X-ray photoelectron spectroscopy (XPS) measurements. XPS derived stoichiometry points to a similar to 1 : 2 ratio between Ni and TCNE resulting in Ni(TCNE)(x), x approximate to 2. No evidence of pure Ni metal in the in situ grown films was present in the XPS or the ultraviolet photoelectron spectroscopy (UPS) measurements within the detection limits of the techniques.
|
|
