1. |
- Asbjörnsson, Gauti, 1985, et al.
(författare)
-
Modelling of Discrete Downtime in Continuous Crushing Operation
- 2016
-
Ingår i: Minerals Engineering. - : Elsevier BV. - 0892-6875. ; 98, s. 22-29
-
Tidskriftsartikel (refereegranskat)abstract
- © 2016 Elsevier Ltd Crushing is a harsh process and production units are subjected to wear and failure over time which will reduce the overall performance of the plant. To achieve optimum process performance, both time dependant process dynamics and operating conditions should be taken into account. In this paper the aim is to simulate the process from a more operational perspective to evaluate process performance and process optimum for different operations. The objective is to model and simulate the discrete phenomena that can cause the process to alter performance and implement it with dynamic process simulations. An approach for combining discrete event simulations with time-dependent simulations for process evaluation and optimization is presented. The proposed approach demonstrates a systematic way to evaluate the process performance and locating optimum process configuration, for a given condition. The developed models can be used to optimize different aspects of the operation depending on the defined objective function and the system boundaries. Optimization of process throughput by manipulating configuration of both the grizzly and the crushers, as well as the time between calibrations has been illustrated in this paper. Adjusting the process continuously and calibrating it at the appropriate time can have major benefits when it comes to the process availability and utilization, increasing performance by 4.1–9.3% in these cases. Evaluation of process robustness and availability with regards to process specific factors and variation gave an indication of the process and unit performance under a long operating period. By combining discrete and dynamic simulation, a higher simulation fidelity can be achieved to provide a more operational perspective to the optimization and process analysis.
|
|
2. |
- Asbjörnsson, Gauti, 1985, et al.
(författare)
-
Modelling of Discrete Downtime in Continuous Crushing Operation
- 2015
-
Ingår i: Computational Modelling 2015, MEI conference.
-
Konferensbidrag (refereegranskat)abstract
- Crushing is a harsh process and production units are subjected to wear and failure over time which will reduce the overall performance of the plant. To achieve optimum process performance, both time dependant process dynamics and operating conditions should be taken into account.In this paper the aim is to create a framework for simulating the process from a more operational perspective to evaluate process performance and process optimum for different operational scenarios. The objective is to model and simulate the discrete phenomena that can cause the process to alter performance and implement it with dynamic process simulations. A method for combining discrete probability simulations with time-continuous simulations for process evaluation and optimization is presented. The proposed framework demonstrates a systematic approach to evaluate the process performance and locating optimum process configuration, for a given condition. The developed models can be used to optimize different aspects of the operation depending on the defined objective function and the system boundaries. Optimization of process throughput by manipulating configuration of both the grizzly and the crushers, as well as the time between calibrations has been illustrated in this paper. Adjusting the process continuously and calibrating it at the appropriate time can have major benefits when it comes to the process availability and utilization, increasing performance by 4.1-9.3 % in these cases. Evaluation of process robustness with regards to different maintenance strategies and process variation gave an indication of the process and unit performance under a long operating period. By combining discrete and dynamic simulation, a higher simulation fidelity can be achieved to provide a more operational perspective to the optimization and process analysis.
|
|
3. |
- Bengtsson, Magnus, 1973, et al.
(författare)
-
ADVANCED MATERIAL MODELLING IN CRUSHING PLANTS USING REAL TIME ALGORITHMS
- 2015
-
Ingår i: Computational Modelling 2015, MEI conference.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In process control of crushing plants the traditional control is focused on stability control ofsingle machines and not on controlling material utilization. The reason for this is that the use ofmaterial property models is not that well known. The material models describe properties as e.g.capacity over time for a given product and this may depend on many parameters and dynamic effectsin the process. Due to this it is complicated to model and thus a methodology is needed to solve thisproblem. In this paper a novel method for modeling the current effect that the production units haveon the material presented. The paper presents a methodology how to use process data from SCADAsystem to analyze and suggest dynamic material model properties in real time.
|
|
4. |
|
|
5. |
|
|
6. |
- Bengtsson, Magnus, 1973, et al.
(författare)
-
Cost And Performance Optimization Of A Tertiary Crushing Stage
- 2015
-
Ingår i: ESCC 2015 Conference. - Göteborg : Chalmers University of Technology. - 9789188041012
-
Konferensbidrag (refereegranskat)abstract
- There is increasing demand to optimise performance and profit of crushing plants. Research in this area has resulted in the development of numerous optimisation tools, and resent research has shown that the quality aspects of production have great influence on the optimisation results. The quality, cost, profit and capacity of a product is influenced by several parameters, and in order to control all of these parameters it is necessary to use some sort of optimisation software. In this paper, a novel approach use the parameters cost, profit, capacity and quality in order to perform a multi objective optimization of a crushing plant is presented. As an example a tertiary crushing stage consistent of a cone crusher and a vertical shaft impact crusher (VSI) is used as base for the designed objective function. The process has a given set of constraints that represents the conditions normal in these type of crushing applications. The first step in this paper is to identify if the range of the constraints can cause undesirable production costs when reaching for a given product property. The next step in the optimization shows how a strategy for relaxing constraint can increase overall productivity and still reach certain product properties. The conclusions made in this work are that multi objective optimization is essential when optimizing crushing plant production against multiple objectives. Relaxation of constraints can increase the overall performance of the crushing plant.
|
|
7. |
- Bengtsson, Magnus, 1973, et al.
(författare)
-
Framework for material modelling in a processing plant
- 2015
-
Ingår i: Computational Modelling ‘15.
-
Konferensbidrag (refereegranskat)abstract
- Material modelling within a crushing plant is closely dependent on both manual and automatic operations as well as a close follow up on the utilization of the plant performance from a management perspective. The desire to fully be able to utilize the crushing plant with respect e.g. to material handling is limited due to the lack of possibility to fully observe actions within the process. There are large quantities of data that can be monitored in the crushing plant SCADA system. However the data collected are governed by the quantity of actual sensors in the process. The aim with this paper is to propose a method for how-to pre-process the automatically gathered SCADA data in order to fill up dynamic models for process simulations. There is a fundamental need to increase the resolution of how the crushing plant behaves. This will be structured as a framework for analysing and suggesting model improvements that will increase the utilization and decrease both manual operations and give better performance when controlling the process.
|
|
8. |
- Bengtsson, Magnus, 1973, et al.
(författare)
-
Improving Yield and Shape in a Crushing Plant
- 2009
-
Ingår i: Proceedings of 12th European Symposium on Comminution and Classification (ESCC2009).
-
Konferensbidrag (refereegranskat)abstract
- There is increasing demand to optimise yield and increase capacity of crushing plants. Research in this area has resulted in the development of numerous optimisation tools, and resent research has shown that the quality aspects of production have great influence on the optimisation results. The quality and capacity of a product is influenced by several parameters, and in order to control all these parameters it is necessary to use some sort of optimisation software. In this paper, a novel approach to analyse parameters influence on product capacity and quality is presented. As an example a cone crusher and a vertical shaft impact crusher (VSI) is simulated in a tertiary stage. The simulation shows how capacity and product quality for a range of products will be affected when a parameter is changed. The paper also shows how wear will affect product capacity and quality.
|
|
9. |
- Bengtsson, Magnus, 1973, et al.
(författare)
-
Influence of throw and compression ratio on particle shape - A full scale investigation and laboratory tests
- 2010
-
Ingår i: Minerals Engineering. - : Elsevier BV. - 0892-6875 .- 1872-9444. ; 23:7, s. 549-557
-
Tidskriftsartikel (refereegranskat)abstract
- The machine parameters of throw and eccentric speed affect the particle shape. Their influence on particle shape is however not fully investigated. Preliminary tests on a full-scale crusher had shown certain trends in regard to the flakiness of the product (Fig. 1). These effects were investigated in detail by means of a series of piston-and-die tests, followed by modelling of the laboratory data. An empirical model of a crusher was developed which links the product size distribution and the shape of the particles to operating parameters. The simulator produced trends which were similar to the full-scale data. The throw and eccentric speed affects the utilised compression acting on the rock/rock-bed. This paper presents a method suitable for characterizing the compressive breakage behaviour of rock materials during form conditioned compression. In this method, size reduction is primarily related to geometric compression. The method provides a complete description of the breakage characteristics of the tested rock material when compressive crushing is employed. The results can be used for modelling and simulation purposes in the design of crushing equipment or crushing plants. A novel approach to optimise form conditioned crushing in order to achieve an acceptable particle size and shape is presented. The paper concludes that inter-particle breakage in combination with high compression ratio is beneficial for the particle shape. The full scale tests support this since an increase in throw improves particle shape for particles subjected to inter-particle breakage. © 2009 Elsevier Ltd. All rights reserved.
|
|
10. |
- Bengtsson, Magnus, 1973, et al.
(författare)
-
Model of banana screen for robust performance
- 2016
-
Ingår i: Minerals Engineering. - : Elsevier BV. - 0892-6875 .- 1872-9444. ; 91, s. 66-73
-
Tidskriftsartikel (refereegranskat)abstract
- Screens are an important production unit in crushing plants. The performance of the screen is essential to the performance of the crushing plant. In this paper a mechanistic model of a banana screen is described and a novel model for screen deck configuration is presented. The developed model can be used for optimization of a screen so that it has the best possible performance with respect to different feeding conditions, in order to obtain a desired separation. The simulation results were compared to full scale test data and the conclusions from this comparison is that the screen model needs further parameters to handle the necessary screen deck configuration. An initial static model was derived to explain how the screen deck configuration will affect the screen efficiency. The modification of the screen deck parameters resulted in a better correlation both regarding size distribution and predicted capacity.
|
|