| 1. |
- Karlsson, Mattias, 1980, et al.
(författare)
-
Biomimetic nanoscale reactors and networks
- 2004
-
Ingår i: Annual Review of Physical Chemistry. - : Annual Reviews. - 0066-426X .- 1545-1593. ; 55, s. 613-49
-
Tidskriftsartikel (refereegranskat)abstract
- Methods based on self-assembly, self-organization, and forced shape transformations to form synthetic or semisynthetic enclosed lipid bilayer structures with several properties similar to biological nanocompartments are reviewed. The procedures offer unconventional micro- and nanofabrication routes to yield complex soft-matter devices for a variety of applications for example, in physical chemistry and nanotechnology. In particular, we describe novel micromanipulation methods for producing fluid-state lipid bilayer networks of nanotubes and surface-immobilized vesicles with controlled geometry, topology, membrane composition, and interior contents. Mass transport in nanotubes and materials exchange, for example, between conjugated containers, can be controlled by creating a surface tension gradient that gives rise to a moving boundary or by induced shape transformations. The network devices can operate with extremely small volume elements and low mass, to the limit of single molecules and particles at a length scale where a continuum mechanics approximation may break down. Thus, we also describe some concepts of anomalous fluctuation-dominated kinetics and anomalous diffusive behaviours, including hindered transport, as they might become important in studying chemistry and transport phenomena in these confined systems. The networks are suitable for initiating and controlling chemical reactions in confined biomimetic compartments for rationalizing, for example, enzyme behaviors, as well as for applications in nanofluidics, bioanalytical devices, and to construct computational and complex sensor systems with operations building on chemical kinetics, coupled reactions and controlled mass transport.
|
|
| 2. |
- Bergenholtz, Johan, 1964, et al.
(författare)
-
On-off dissociation dynamics of colloidal doublets
- 2013
-
Ingår i: Europhysics letters. - : IOP Publishing. - 0295-5075 .- 1286-4854. ; 104:1
-
Tidskriftsartikel (refereegranskat)abstract
- First-passage time theory is used to analyze the dissociation behavior of doublets of colloidal particles. The first-passage time distribution for particles interacting via a DLVO potential is determined numerically. For strongly attractive particles the distribution becomes broad such that the mean first-passage time becomes a poor measure of the dynamics. In spite of this, use can be made of the mean in a matching condition, which allows for reproducing distributions for strongly attractive doublets by a semi-analytical solution for particles interacting only through surface adhesion. The smallest eigenvalue in the analytical solution, which governs the long-time asymptotic behavior of the first-passage time distribution, is identified analytically for strongly attractive pairs of particles. In addition, in this limit the distribution is shown to asymptote to an exponential distribution, which means that the dissociation process can be simply captured by an on-off model, without sacrificing the effect of the surface chemistry, with a constant probability for dissociation. This probability is simply related to the surface-adhesive parameter and the separation distance at which the pair of particles ceases to be considered a doublet.
|
|
| 3. |
- Kaunisto, Erik, 1982, et al.
(författare)
-
A simple model for simulation of particle deaggregation of few-particle aggregates
- 2014
-
Ingår i: AIChE Journal. - : Wiley. - 0001-1541 .- 1547-5905. ; 60:5, s. 1863-1869
-
Tidskriftsartikel (refereegranskat)abstract
- A proper mechanistic understanding of the deaggregation process of small colloidal particle aggregates is of generic importance within many fields of science and engineering. The methodology for modeling colloidal deaggregation is currently limited to analytical solutions in the two-particle case and time consuming numerical algorithms, such as Brownian Dynamics (BD) simulations, for many-particle aggregates. To address this issue, a simplified alternative model that describes deaggregation of few-particle aggregates is presented. The model includes end-particle deaggregation and a particle reconfiguration mechanism, which are the two most important mechanisms for deaggregation. Comparison of the calculated first passage time distribution for various two-, three-, four-, and five-particle aggregates with the corresponding result using BD simulations confirms the validity of the model. It is concluded that the dominating mechanism behind deaggregation can be quantified using a deaggregation number, which reflects the time scale for reconfiguration relative to the time scale for end-particle deaggregation.
|
|
| 4. |
- Abbas, Zareen, 1962, et al.
(författare)
-
Synthesis, characterization and particle size distribution of TiO2 colloidal nanoparticles
- 2011
-
Ingår i: Colloids and Surfaces A: Physicochemical and Engineering Aspects. - : Elsevier BV. - 0927-7757. ; 384:1-3, s. 254-261
-
Tidskriftsartikel (refereegranskat)abstract
- Nanoparticles of controlled size, well defined shape, pure phase and of clean surfaces are ideal model systems to investigate surface/interfacial reactions. In this study we have explored the possibility of synthesizing TiO2 nanoparticles in the size range of 7–20 nm under well controlled experimental conditions. A simple method based on the hydrolysis of TiCl4 was used to obtain particles having surfaces free from organics. Stable dispersions of TiO2 nanoparticles of various sizes were obtained by optimizing the reaction/dialysis time and temperature. The synthesized TiO2 particles were found to be predominantly of anatase phase and narrow particle size distributions were obtained. The TiO2 particles were characterized with respect to their phase, size and shape by X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. Particle size distribution in a colloidal dispersion was obtained by the electrospray scanning mobility particle sizer (ES-SMPS) method and compared with an average particle size determined from dynamic light scattering (DLS). The average particle sizes obtained by the DLS and ES-SMPS methods were in good agreement, while a primary particle size of 4 nm was found in X-ray diffraction irrespective of the particle size in solution. Early stages of the nucleation process were monitored by the ES-SMPS method. These results show that small particles of 4–5 nm are initially formed and it is highly likely that large particles are formed due to aggregation of primary particles.
|
|
| 5. |
|
|
| 6. |
- Abrahamsson, Christoffer, 1984, et al.
(författare)
-
Magnetically induced structural anisotropy in binary colloidal gels and its effect on diffusion and pressure driven permeability
- 2014
-
Ingår i: Soft Matter. - 1744-683X .- 1744-6848. ; 10:24, s. 4403-4412
-
Tidskriftsartikel (refereegranskat)abstract
- We report on the synthesis, microstructure and mass transport properties of a colloidal hydrogel selfassembled from a mixture of colloidal silica and nontronite clay plates at different particle concentrations. The gel-structure had uniaxial long-range anisotropy caused by alignment of the clay particles in a strong external magnetic field. After gelation the colloidal silica covered the clay particle network, fixing the orientation of the clay plates. Comparing gels with a clay concentration between 0 and 0.7 vol%, the magnetically oriented gels had a maximum water permeability and self-diffusion coefficient at 0.3 and 0.7 vol% clay, respectively. Hence the specific clay concentration resulting in the highest liquid flux was pressure dependent. This study gives new insight into the effect of anisotropy, particle concentration and bound water on mass transport properties in nano/microporous materials. Such findings merit consideration when designing porous composite materials for use in for example fuel cell, chromatography and membrane technology.
|
|
| 7. |
- Ahlström, Bodil, 1968, et al.
(författare)
-
Prediction of structures and gel transitions in systems of colloids with moderate-range attractions
- 2007
-
Ingår i: Journal of Physics. Condensed Matter. - : IOP Publishing. - 0953-8984 .- 1361-648X. ; 19, s. 036102-036117
-
Tidskriftsartikel (refereegranskat)abstract
- Predictions of glass transitions from the idealized mode-coupling theory (MCT) are tested for systems with intermediate-range particle attractions. Liquid structure input to MCT is provided by the Asakura–Oosawa (AO) theory for the depletion interaction, used as an idealized model for structures in colloid–polymer mixtures. The effective one-component formulation of the AO theory is verified to capture the complete pair structure found from the binary version of the theory also for polymer–colloid size ratios somewhat larger than those for which an exact mapping of the two descriptions holds. The Percus–Yevick theory is shown to provide an accurate structural input to MCT, at least in the single-phase fluid region. With this combination of theories, very reasonable predictions for locations of glassy states in the experimental phase diagram are obtained for polymer–colloid size ratios somewhat larger than have been considered before. Simple approximations are also suggested for extracting the remaining pair structure from calculations of the one-component AO theory.
|
|
| 8. |
- Andersson Trojer, Markus, et al.
(författare)
-
Elastic strain-hardening and shear-thickening exhibited by thermoreversible physical hydrogels based on poly(alkylene oxide)-grafted hyaluronic acid or carboxymethylcellulose
- 2020
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry. - 1463-9076 .- 1463-9084. ; 22:26, s. 14579-14590
-
Tidskriftsartikel (refereegranskat)abstract
- The formation of strongly elastic physical gels based on poly(alkylene oxide)-grafted hyaluronan or carboxymethylcellulose, exhibiting both shear-thickening and strain-hardening have been studied using rheometry and explained using a slightly different interpretation of the transient network theory. The graft copolymers were prepared by a quantitative coupling reaction. Their aqueous solutions displayed a thermoreversible continuous transition from Newtonian fluid to viscoelastic solid which could be controlled by the reaction conditions. The evolution of all material properties of the gel could be categorized into two distinct temperature regimes with a fast evolution at low temperatures followed by a slow evolution at high temperatures. The activation energy of the zero shear viscosity and the relaxation time of the graft inside the interconnecting microdomains were almost identical to each other in both temperature regimes. This suggests that the number of microdomains remained approximately constant whereas the aggregation number inside the microdomains increased according to the binodal curve of the thermosensitive graft.
|
|
| 9. |
- Andersson Trojer, Markus, 1981, et al.
(författare)
-
Quantitative Grafting for Structure-Function Establishment: Thermoresponsive Poly(alkylene oxide) Graft Copolymers Based on Hyaluronic Acid and Carboxymethylcellulose
- 2019
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1525-7797 .- 1526-4602. ; 20:3, s. 1271-1280
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019 American Chemical Society. A series of thermoresponsive graft copolymers, gelling at physiological conditions in aqueous solution and cell growth media, have been synthesized using quantitative coupling between a small set of amino-functionalized poly(alkylene oxide) copolymers (PAO) and the carboxylate of the biologically important polysaccharides (PSa) carboxymethylcellulose and the less reactive hyaluronate. Quantitative grafting enables the establishment of structure-function relationship which is imperative for controlling the properties of in situ gelling hydrogels. The EDC/NHS-mediated reaction was monitored using SEC-MALLS, which revealed that all PAOs were grafted onto the PSa backbone. Aqueous solutions of the graft copolymers were Newtonian fluids at room temperatures and formed reversible physical gels at elevated temperatures which were noncytotoxic toward chondrocytes. The established structure-function relationship was most clearly demonstrated by inspecting the thermogelling strength and the onset of thermogelling in a phase diagram. The onset of the thermogelling function could be controlled by the global PAO concentration, independent of graft ratio.
|
|
| 10. |
- Arteta, Marianna Yanez, et al.
(författare)
-
Successful reprogramming of cellular protein production through mRNA delivered by functionalized lipid nanoparticles
- 2018
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 115:15
-
Tidskriftsartikel (refereegranskat)abstract
- © 2018 National Academy of Sciences. All Rights Reserved. The development of safe and efficacious gene vectors has limited greatly the potential for therapeutic treatments based on messenger RNA (mRNA). Lipid nanoparticles (LNPs) formed by an ionizable cationic lipid (here DLin-MC3-DMA), helper lipids (distearoylphos-phatidylcholine, DSPC, and cholesterol), and a poly(ethylene glycol) (PEG) lipid have been identified as very promising delivery ve ctors of short interfering RNA (siRNA) in different clinical phases; however, delivery of high-molecular weight RNA has been proven much more demanding. Herein we elucidate the structure of hEPO modified mRNA-containing LNPs of different sizes and show how structural differences affect transfection of human adipocytes and hepatocytes, two clinically relevant cell types. Employing small-angle scattering, we demonstrate that LNPs have a disordered inverse hexagonal internal structure with a characteristic distance around 6 nm in presence of mRNA, whereas LNPs containing no mRNA do not display this structure. Furthermore, using contrast variation small-angle neutron scattering, we show that one of the lipid components, DSPC, is localized mainly at the surface of mRNA-containing LNPs. By varying LNP size and surface composition we demonstrate that both size and structure have significant influence on intracellular protein production. As an example, in both human adipocytes and hepatocytes, protein expression levels for 130 nm LNPs can differ as much as 50-fold depending on their surface characteristics, likely due to a difference in the ability of LNP fusion with the early endosome membrane. We consider these discoveries to be fundamental and opening up new possibilities for rational design of synthetic nanoscopic vehicles for mRNA delivery.
|
|
