| 1. |
- Finze, Anika, et al.
(författare)
-
Individual regional associations between Aβ-, tau- and neurodegeneration (ATN) with microglial activation in patients with primary and secondary tauopathies
- 2023
-
Ingår i: MOLECULAR PSYCHIATRY. - 1359-4184 .- 1476-5578. ; 28:10, s. 4438-4450
-
Tidskriftsartikel (refereegranskat)abstract
- & beta;-amyloid (A & beta;) and tau aggregation as well as neuronal injury and atrophy (ATN) are the major hallmarks of Alzheimer's disease (AD), and biomarkers for these hallmarks have been linked to neuroinflammation. However, the detailed regional associations of these biomarkers with microglial activation in individual patients remain to be elucidated. We investigated a cohort of 55 patients with AD and primary tauopathies and 10 healthy controls that underwent TSPO-, A & beta;-, tau-, and perfusion-surrogate-PET, as well as structural MRI. Z-score deviations for 246 brain regions were calculated and biomarker contributions of A & beta; (A), tau (T), perfusion (N1), and gray matter atrophy (N2) to microglial activation (TSPO, I) were calculated for each individual subject. Individual ATN-related microglial activation was correlated with clinical performance and CSF soluble TREM2 (sTREM2) concentrations. In typical and atypical AD, regional tau was stronger and more frequently associated with microglial activation when compared to regional A & beta; (AD: & beta;(T) = 0.412 & PLUSMN; 0.196 vs. & beta;(A) = 0.142 & PLUSMN; 0.123, p < 0.001; AD-CBS: & beta;(T) = 0.385 & PLUSMN; 0.176 vs. & beta;(A) = 0.131 & PLUSMN; 0.186, p = 0.031). The strong association between regional tau and microglia reproduced well in primary tauopathies (& beta;(T) = 0.418 & PLUSMN; 0.154). Stronger individual associations between tau and microglial activation were associated with poorer clinical performance. In patients with 4RT, sTREM2 levels showed a positive association with tau-related microglial activation. Tau pathology has strong regional associations with microglial activation in primary and secondary tauopathies. Tau and A & beta; related microglial response indices may serve as a two-dimensional in vivo assessment of neuroinflammation in neurodegenerative diseases.
|
|
| 2. |
- Krege, Susanne, et al.
(författare)
-
European consensus conference on diagnosis and treatment of germ cell cancer: A report of the second meeting of the European Germ Cell Cancer Consensus Group (EGCCCG): Part I
- 2008
-
Ingår i: European Urology. - : Elsevier BV. - 1873-7560 .- 0302-2838. ; 53:3, s. 478-496
-
Forskningsöversikt (refereegranskat)abstract
- Objectives: The first consensus report presented by the European Germ Cell Cancer Consensus Group (EGCCCG) in the year 2004 has found widespread approval by many colleagues throughout the world. In November 2006, the group met a second time under the auspices of the Department of Urology of the Amsterdam Medical Center, Amsterdam, The Netherlands. Methods: Medical oncologists, urological surgeons, radiation oncologists as well as pathologists from several European countries reviewed and discussed the data that had emerged since the 2002 conference, and incorporated the new data into updated and revised guidelines. As for the first meeting, the methodology of evidence-based medicine (EBM) was applied. The results of the discussion were compiled by the writing committee. All participants have agreed to this final update. Results: The first part of the consensus paper describes the clinical presentation of the primary tumor, its treatment, the importance and treatment of testicular intraepithelial neoplasia (TIN), histological classification, staging and prognostic factors, and treatment of stage I seminoma and non-seminoma. Conclusions: Whereas the vast majority of the recommendations made in 2004 remain valid 3 yr later, refinements in the treatment of early- and advanced-stage testicular cancer have emerged from clinical trials. Despite technical improvements, expert clinical skills will continue to be one of the major determinants for the prognosis of patients with germ cell cancer. In addition, the particular needs of testicular cancer survivors have been acknowledged. (C) 2007 European Association of Urology. Published by Elsevier B.V. All rights reserved.
|
|
| 3. |
- Krege, Susanne, et al.
(författare)
-
European consensus conference on diagnosis and treatment of germ cell cancer: A report of the second meeting of the European Germ Cell Cancer Consensus Group (EGCCCG): Part II
- 2008
-
Ingår i: European Urology. - : Elsevier BV. - 1873-7560 .- 0302-2838. ; 53:3, s. 497-513
-
Forskningsöversikt (refereegranskat)abstract
- Objectives: The first consensus report that had been presented by the European Germ Cell Cancer Consensus Group (EGCCCG) in 2004 has found widespread approval by many colleagues throughout the world. In November 2006, the group met a second time under the auspices of the Department of Urology of the Amsterdam Medical Center, The Netherlands. Methods: Medical oncologists, urologic surgeons, radiation oncologists as well as pathologists from several European countries reviewed and discussed the data that had emerged since the 2002 conference and incorporated the new data into updated and revised guidelines. As for the first meeting the methodology of evidence-based medicine (EBM) was applied. The results of the discussion were compiled by the writing committee. All participants have agreed to this final update. Results: The second part of the consensus paper includes the treatment of metastasised disease, residual tumour resection, salvage therapy, follow-up, and late toxicities. Conclusions: Whereas the vast majority of the recommendations made in 2004 remain valid 3 yr later, refinements in the treatment of early-stage as well as of advanced-stage testicular cancer have emerged from clinical trials. Despite technical improvements, expert clinical skills will continue to be one of the major determinants for the prognosis of patients with germ cell cancer. in addition, the particular needs of testicular cancer survivors have been acknowledged. (C) 2007 European Association of Urology. Published by Elsevier B.V. All rights reserved.
|
|
| 4. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 5. |
- Beyer, Anja-Silke, et al.
(författare)
-
Engulfment adapter PTB domain containing 1 interacts with and affects processing of the amyloid-beta precursor protein
- 2010
-
Ingår i: Neurobiology of Aging. - : Elsevier. - 0197-4580 .- 1558-1497. ; 33:4, s. 732-743
-
Tidskriftsartikel (refereegranskat)abstract
- Previous studies identified engulfment adapter phosphotyrosine binding (PTB) domain containing 1 (GULP1) as an NPXY-motif interactor of low-density lipoprotein receptor-related protein 1 (LRP1) and suggested a potential relevance in Alzheimer's disease (AD). Since AD associated proteins amyloid-beta A4 precursor protein (APP) and LRP1 were shown to interact with the PTB domain of Fe65 and several other adapters via their intracellular NPXY-motifs, we examined a possible interaction of GULP1 PTB domain with the YENPTY-motif of APP. Here we demonstrate that GULP1 is present in human hippocampal and neocortical neurons. Confocal live cell imaging revealed that coexpressed and endogenous GULP1 colocalizes with APP in the Golgi and endoplasmic reticulum. Analysis of the interacting domains by co-immunoprecipitation of point and deletion mutants revealed that the interaction depends on the PTB domain of GULP1 and the YENPTY-motif of APP. Coexpression of GULP1 affected APP cell surface localization and suppressed generation of Abeta40/42 and sAPPalpha. Taken together, these data identify GULP1 as a novel neuronal APP interacting protein that alters trafficking and processing of APP.
|
|
| 6. |
- Gandaglia, Giorgio, et al.
(författare)
-
Clinical Characterization of Patients Diagnosed with Prostate Cancer and Undergoing Conservative Management : A PIONEER Analysis Based on Big Data
- 2023
-
Ingår i: European Urology. - 0302-2838.
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Conservative management is an option for prostate cancer (PCa) patients either with the objective of delaying or even avoiding curative therapy, or to wait until palliative treatment is needed. PIONEER, funded by the European Commission Innovative Medicines Initiative, aims at improving PCa care across Europe through the application of big data analytics. Objective: To describe the clinical characteristics and long-term outcomes of PCa patients on conservative management by using an international large network of real-world data. Design, setting, and participants: From an initial cohort of >100 000 000 adult individuals included in eight databases evaluated during a virtual study-a-thon hosted by PIONEER, we identified newly diagnosed PCa cases (n = 527 311). Among those, we selected patients who did not receive curative or palliative treatment within 6 mo from diagnosis (n = 123 146). Outcome measurements and statistical analysis: Patient and disease characteristics were reported. The number of patients who experienced the main study outcomes was quantified for each stratum and the overall cohort. Kaplan-Meier analyses were used to estimate the distribution of time to event data. Results and limitations: The most common comorbidities were hypertension (35–73%), obesity (9.2–54%), and type 2 diabetes (11–28%). The rate of PCa-related symptomatic progression ranged between 2.6% and 6.2%. Hospitalization (12–25%) and emergency department visits (10–14%) were common events during the 1st year of follow-up. The probability of being free from both palliative and curative treatments decreased during follow-up. Limitations include a lack of information on patients and disease characteristics and on treatment intent. Conclusions: Our results allow us to better understand the current landscape of patients with PCa managed with conservative treatment. PIONEER offers a unique opportunity to characterize the baseline features and outcomes of PCa patients managed conservatively using real-world data. Patient summary: Up to 25% of men with prostate cancer (PCa) managed conservatively experienced hospitalization and emergency department visits within the 1st year after diagnosis; 6% experienced PCa-related symptoms. The probability of receiving therapies for PCa decreased according to time elapsed after the diagnosis.
|
|
| 7. |
- Kowal-Bielecka, Otylia, et al.
(författare)
-
Update of EULAR recommendations for the treatment of systemic sclerosis
- 2017
-
Ingår i: Annals of the Rheumatic Diseases. - : BMJ. - 0003-4967 .- 1468-2060. ; 76, s. 1327-1339
-
Tidskriftsartikel (refereegranskat)abstract
- The aim was to update the 2009 European League against Rheumatism (EULAR) recommendations for the treatment of systemic sclerosis (SSc), with attention to new therapeutic questions. Update of the previous treatment recommendations was performed according to EULAR standard operating procedures. The task force consisted of 32 SSc clinical experts from Europe and the USA, 2 patients nominated by the pan-European patient association for SSc (Federation of European Scleroderma Associations (FESCA)), a clinical epidemiologist and 2 research fellows. All centres from the EULAR Scleroderma Trials and Research group were invited to submit and select clinical questions concerning SSc treatment using a Delphi approach. Accordingly, 46 clinical questions addressing 26 different interventions were selected for systematic literature review. The new recommendations were based on the available evidence and developed in a consensus meeting with clinical experts and patients. The procedure resulted in 16 recommendations being developed (instead of 14 in 2009) that address treatment of several SSc-related organ complications: Raynaud's phenomenon (RP), digital ulcers (DUs), pulmonary arterial hypertension (PAH), skin and lung disease, scleroderma renal crisis and gastrointestinal involvement. Compared with the 2009 recommendations, the 2016 recommendations include phosphodiesterase type 5 (PDE-5) inhibitors for the treatment of SSc-related RP and DUs, riociguat, new aspects for endothelin receptor antagonists, prostacyclin analogues and PDE-5 inhibitors for SSc-related PAH. New recommendations regarding the use of fluoxetine for SSc-related RP and haematopoietic stem cell transplantation for selected patients with rapidly progressive SSc were also added. In addition, several comments regarding other treatments addressed in clinical questions and suggestions for the SSc research agenda were formulated. These updated data-derived and consensus-derived recommendations will help rheumatologists to manage patients with SSc in an evidence-based way. These recommendations also give directions for future clinical research in SSc.
|
|
| 8. |
- Lopez, Elena, et al.
(författare)
-
Evaluation of 3D-printed parts by means of high-performance computer tomography
- 2018
-
Ingår i: Journal of laser applications. - : American Institute of Physics (AIP). - 1042-346X .- 1938-1387. ; 30:3
-
Tidskriftsartikel (refereegranskat)abstract
- Conventional tactile and optical testing methods are not capable to detect complex inner geometries or complex surface shapes. Detecting porosities in parts is also not possible with those nondestructive methods. Among other material parameters, geometrical accuracy is essential to determine part's quality. Additive manufacturing processes also have to be optimized regarding geometry deviations caused by distortion or unfavorable orientation in the build chamber. For additive manufactured parts that incorporate previously mentioned features, high-performance computer tomography is the more suitable nondestructive testing method. Components of different materials such as plastics, ceramics, composites, or metals can be completely characterized. This nondestructive testing method was used for porosity analysis regarding the shape and local distribution of pores in an additive manufactured part to find correlations concerning the most suitable process conditions. The measured part data were also compared to original CAD files to determine zones of deviation and apply specific process strategies to avoid distortion. This paper discusses the results of integrating high-performance computer tomography (power: 500 W, max. part size: Ø 300 mm, 300 × 430 mm2) in a productionlike environment of additively manufactured parts for a wide range of technologies (i.e., electron beam melting and selective laser melting). I. INTRODUCTION
|
|
| 9. |
- Marz, Manja, et al.
(författare)
-
Animal snoRNAs and scaRNAs with exceptional structures
- 2011
-
Ingår i: RNA Biology. - : Informa UK Limited. - 1547-6286 .- 1555-8584. ; 8:6, s. 938-946
-
Tidskriftsartikel (refereegranskat)abstract
- The overwhelming majority of small nucleolar RNAs (snoRNAs) fall into two clearly defined classes characterized by distinctive secondary structures and sequence motifs. A small group of diverse ncRNAs, however, shares the hallmarks of one or both classes of snoRNAs but differs substantially from the norm in some respects. Here, we compile the available information on these exceptional cases, conduct a thorough homology search throughout the available metazoan genomes, provide improved and expanded alignments, and investigate the evolutionary histories of these ncRNA families as well as their mutual relationships.
|
|
| 10. |
- Pierer, Jörg, et al.
(författare)
-
Photonic sensing of food allergy : integration and miniaturization
- 2012
-
Ingår i: Smart Systems Integration.
-
Konferensbidrag (refereegranskat)abstract
- Food allergies can provoke severe clinical reactions. Within the FP7 project POSITIVE a Lab-on-a-Chip platform for label-free quantitative allergen testing is under development. The system integrates fluidic handling, optical interrogation and a porous Silicon based bio sensor cartridge. Optical and fluidic concepts have been derived and partially tested with positive results on lab bench level. Further effort has to be spent on higher system integration and miniaturization of the components as well as signal processing and data evaluation. Model tests based on the immobilization of allergens and molecular recognition by specific antibodies have been established proofing the pre-treated porous Silicon membranes bio assay suitability.
|
|
