| 1. |
- Holmin, Susanne, et al.
(författare)
-
Investigation of Electrode Materials as Sensors in a Voltammetric Electronic Tongue
- 2002
-
Ingår i: Electroanalysis. - Weinheim, Germany : Wiley-VCH Verlagsgesellschaft. - 1040-0397 .- 1521-4109. ; 14:12, s. 839-847
-
Tidskriftsartikel (refereegranskat)abstract
- In this work different electrode materials were investigated as sensors in a voltammetric electronic tongue. Basically, the electronic tongue is based on the combination of nonspecific sensors (electrodes) and pattern recognition tools, for example principal component analysis (PCA). Copper. glassy carbon, nickel, palladium, silver, tin, titanium and zirconium together with more traditional electrode materials such as gold, iridium, and platinum were studied. Cyclic voitammetry was applied to study typical model reactions in solutions containing different electroactive compounds, like ascorbic acid, glucose, histidine and potassium hexacyanoferrate(II). Different sensitivity and selectivity were obtained with the electrodes. Large responses were for example found for the amino acid and the carbohydrate using the copper, nickel and silver electrode. Some of the electrodes were employed in multicomponent solutions, i.e., liquid washing detergents from different suppliers together with differential pulse voltammetry. Responses from the electrodes in combination with PCA showed that they separated the detergents to different extents. This was further used when information from the sensors was merged together for successful discrimination of the detergents. It was found that two detergents close to each other in the score plot were from the same supplier. Furthermore. scanning electron microscopy (SEM) was used to monitor surface changes at the nonnoble electrodes (copper, nickel, and silver).
|
|
| 2. |
- Jeschull, Fabian, et al.
(författare)
-
Influence of inactive electrode components on degradation phenomena in nano-Si electrodes for Li-ion batteries
- 2016
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753 .- 1873-2755. ; 325, s. 513-524
-
Tidskriftsartikel (refereegranskat)abstract
- The electrode morphology and electrochemistry of silicon nanocomposite electrodes containing either carboxymethyl cellulose (CMC-Na) or poly(acrylic acid) (PAA) binders are examined in context of their working surface area. Using porous carbon (Ketjenblack) additives, coatings with poor adhesion properties and deep cracks were obtained. The morphology is also reflected in the electrochemical behavior under capacity-limited conditions. Mapping the differential capacity versus potential over all cycles yields detailed insights into the degradation processes and shows the onset of cell failure with the emergence of lithium-rich silicon alloys at low potentials, well before capacity fading is observed. Fading occurs faster with electrodes containing PAA binder. The surface area of the electrode components is a major cause of increased irreversible reaction and capacity fade. Synchrotron-based X-ray photoelectron spectroscopy on aged, uncycled electrodes revealed accelerated conversion of the native SiOx-layer to detrimental SiOxFy in presence of Ketjenblack. In contrast, a conventional carbon black better preserved the SiOx-layer. This effect is attributed to preferred adsorption of binder on high surface area electrode components and highlights the role of binders as 'artificial SEI-layers'. This work demonstrates that optimization of nanocomposites requires careful balancing of the surface areas and amounts of all the electrode components applied.
|
|
| 3. |
- Lindgren, Fredrik, et al.
(författare)
-
A hard X-ray photoelectron spectroscopy study on the solid electrolyte interphase of a lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide based electrolyte for Si-electrodes
- 2016
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753 .- 1873-2755. ; 301, s. 105-112
-
Tidskriftsartikel (refereegranskat)abstract
- This report focuses on the relatively new salt, lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide (LiTDI), and its functionality together with a silicon based composite electrode in a half-cell lithium ion battery context. LiTDI is a promising alternative to the commonly used LiPF6 salt because it does not form HF which can decompose the oxide layer on Si. The formation of a solid electrolyte interphase (SEI) as well as the development of the active Si-particles are investigated during the first electrochemical lithiation and de-lithiation. Characterizations are carried out at different state of charge with scanning electron microscopy (SEM) as well as hard x-ray photoelectron spectroscopy (HAXPES) at two different photon energies. This enables a depth resolved picture of the reaction processes and gives an idea of the chemical buildup of the SEI. The SEI is formed by solvent and LiTDI decomposition products and its composition is similar to SEI formed by other carbonate based electrolytes. The LiTDI salt or its decomposition products are not in itself reactive towards the active Si-material and no unwanted side reactions occurs with the active Si-particles. Despite some decomposition of the LiTDI salt, it is a promising alternative for electrolytes aimed towards Si-based electrodes.
|
|
| 4. |
- Lindgren, Fredrik, et al.
(författare)
-
SEI Formation and Interfacial Stability of a Si Electrode in a LiTDI-Salt Based Electrolyte with FEC and VC Additives for Li-Ion Batteries
- 2016
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 8:24, s. 15758-15766
-
Tidskriftsartikel (refereegranskat)abstract
- An electrolyte based on the new salt, lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide (LiTDI), is evaluated in combination with nano-Si composite electrodes for potential use in Li-ion batteries. The additives fluoroethylene carbonate (FEC) and vinylene carbonate (VC) are also added to the electrolyte to enable an efficient SEI formation. By employing hard X-ray photoelectron spectroscopy (HAXPES), the SEI formation and the development of the active material is probed during the first 100 cycles. With this electrolyte formulation, the Si electrode can cycle at 1200 mAh g(-1) for more than 100 cycles at a coulombic efficiency of 99%. With extended cycling, a decrease in Si particle size is observed as well as an increase in silicon oxide amount. As opposed to LiPF6 based electrolytes, this electrolyte or its decomposition products has no side reactions with the active Si material. The present results further acknowledge the positive effects of SEI forming additives. It is suggested that polycarbonates and a high LiF content are favorable components in the SEI over other kinds of carbonates formed by ethylene carbonate (EC) and dimethyl carbonate (DMC) decomposition. This work thus confirms that LiTDI in combination with the investigated additives is a promising salt for Si electrodes in future Li-ion batteries.
|
|
| 5. |
- Lindgren, Fredrik
(författare)
-
Si negative electrodes for Li-ion batteries : Aging mechanism studies by electrochemistry and photoelectron spectroscopy
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis is focusing on the challenges when using Si as a possible new negative electrode material in Li-ion batteries. The overall aim is to contribute to a general understanding of the processes in the Si electrode, to identify aging mechanisms, and to evaluate how they influence the cycling performance. Another objective is to investigate how photoelectron spectroscopy (PES) can be used to analyze these mechanisms.LiPF6 based electrolytes are aggressive towards the oxide layer present at the surface of the Si particles. With the use of fluoroethylene carbonate (FEC) as an electrolyte additive the cycling performance is improved, but the oxide layer is still affected. A recently developed salt, lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide (LiTDI), is shown not to have any detrimental effects on the oxide. The SEI with FEC and vinylene carbonate (VC) as contains a high concentration of LiF and polymeric carbonate species and this composition seems to be beneficial for the cycling performance, but the results indicate that additional aging mechanisms occur. Therefore, electrochemical analysis is performed and confirms a continuous SEI formation. However, it also reveals a self-discharge mechanism and that a considerable amount of Li is remaining in the Si material after standard cycling.PES is used in this work to analyze the SEI-layers as well as the surface and the bulk of the Si material. With this technique it is hence possible to distinguish changes in the Si material as a function of lithiation. To improve the data interpretation of PES spectra, a range of battery electrode model systems are investigated. These results show shifts of the SEI peaks relative to the electrode specific peaks as a result of the SEI thickness and the presence of a dipole layer. Also other electronically insulating composite electrode components show relative peak shifts as a function of the electrochemical potential.To summarize, these studies investigate a number of well recognized aging mechanisms in detail and also establish additional processes contributing to aging in Si electrodes. Furthermore, this work highlights phenomena that influence data interpretation of PES measurements from battery materials.
|
|
| 6. |
- Valvo, Mario, et al.
(författare)
-
Towards more sustainable negative electrodes in Na-ion batteries via nanostructured iron oxide
- 2014
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753 .- 1873-2755. ; 245, s. 967-978
-
Tidskriftsartikel (refereegranskat)abstract
- Na-ion technology could emerge as an alternative to Li-ion batteries due to limited costs and vast availability of sodium, as well as its similar chemistry. Several Na-rich compounds have been proposed as positive electrodes, whereas suitable negative counterparts have not been found yet. Nanostructured iron oxide is reported here for the first time as a potentially viable negative electrode for Na-ion cells based on conventional electrolytes and composite coatings with carboxymethyl cellulose. Electrochemical reactions of Na+ and Li+ ions with nanostructured Fe2O3 are analysed and compared. Initial sodiation of Fe2O3 yields a sloping profile in a voltage range characteristic for oxide conversion, which instead generates a typical plateau upon lithiation. Application of such earth-abundant, nontoxic material in upcoming Na-ion batteries is potentially groundbreaking, since it offers important advantages, namely: i. simple and cost-effective synthesis of Fe2O3 nanostructures at low temperatures; ii. cheaper and more sustainable cell fabrication with higher energy densities, e.g., use of natural, water-soluble binders, as well as Al for both current collectors; iii. electrochemical performances with specific gravimetric capacities exceeding 400 mAh g(-1) at 40 mA g(-1), accompanied by decent specific volumetric energy densities, e.g., approximate to 1.22 Wh cm(-3), provided that cycle inefficiencies and long-term durability are addressed.
|
|
| 7. |
- Xu, Chao, et al.
(författare)
-
Improved Performance of the Silicon Anode for Li-Ion Batteries : Understanding the Surface Modification Mechanism of Fluoroethylene Carbonate as an Effective Electrolyte Additive
- 2015
-
Ingår i: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 27:7, s. 2591-2599
-
Tidskriftsartikel (refereegranskat)abstract
- Silicon as a negative electrode material for lithium-ion batteries has attracted tremendous attention due to its high theoretical capacity, and fluoroethylene carbonate (FEC) was used as an electrolyte additive, which significantly improved the cyclability of silicon-based electrodes in this study. The decomposition of the FEC additive was investigated by synchrotron-based X-ray photoelectron spectroscopy (PES) giving a chemical composition depth-profile. The reduction products of FEC were found to mainly consist of LiF and -CHF-OCO2-type compounds. Moreover, FEC influenced the lithium hexafluorophosphate (LiPF6) decomposition reaction and may have suppressed further salt degradation. The solid electrolyte interphase (SEI) formed from the decomposition of ethylene carbonate (EC) and diethyl carbonate (DEC), without the FEC additive present, covered surface voids and lead to an increase in polarization. However, in the presence of FEC, which degrades at a higher reduction potential than EC and DEC, instantaneously a conformal SEI was formed on the silicon electrode. This stable SEI layer sufficiently limited the emergence of large cracks and preserved the original surface morphology as well as suppressed the additional SEI formation from the other solvent. This study highlights the vital importance of how the chemical composition and morphology of the SEI influence battery performance.
|
|
| 8. |
- Aili, Daniel, 1977-, et al.
(författare)
-
Controlled Assembly of Gold Nanoparticles using De Novo Designed Polypeptide Scaffolds
- 2008
-
Ingår i: Proceedings SPIE, Vol. 6885, Photonic Biosensing and Microoptics. - : SPIE. ; , s. 688506-1-688506-8
-
Konferensbidrag (refereegranskat)abstract
- Heterodimerization between designed helix-loop-helix polypeptides was utilized in order to assemble gold nanoparticles on planar substrates. The peptides were designed to fold into four-helix bundles upon dimerization. A Cys-residue in the loop region was used to immobilize one of the complementary peptides on a maleimide containing SAM on planar gold substrates whereas the second peptide was immobilized directly on gold nanoparticles. Introducing the peptide decorated particles over a peptide functionalized surface resulted in particle assembly. Further, citrate stabilized particles were assembled on amino-silane modified glass and silicon substrates. By subsequently introducing peptides and gold nanoparticles, particle-peptide hybrid multi layers could be formed.
|
|
| 9. |
- Aili, Daniel, 1977-, et al.
(författare)
-
Folding Induced Assembly of Polypeptide Decorated Gold Nanoparticles
- 2008
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 130:17, s. 5780-5788
-
Tidskriftsartikel (refereegranskat)abstract
- Reversible assembly of gold nanoparticles controlled by the homodimerization and folding of an immobilized de novo designed synthetic polypeptide is described. In solution at neutral pH, the polypeptide folds into a helix-loop-helix four-helix bundle in the presence of zinc ions. When immobilized on gold nanoparticles, the addition of zinc ions induces dimerization and folding between peptide monomers located on separate particles, resulting in rapid particle aggregation. The particles can be completely redispersed by removal of the zinc ions from the peptide upon addition of EDTA. Calcium ions, which do not induce folding in solution, have no effect on the stability of the peptide decorated particles. The contribution from folding on particle assembly was further determined utilizing a reference peptide with the same primary sequence but containing both D and L amino acids. Particles functionalized with the reference peptide do not aggregate, as the peptides are unable to fold. The two peptides, linked to the nanoparticle surface via a cysteine residue located in the loop region, form submonolayers on planar gold with comparable properties regarding surface density, orientation, and ability to interact with zinc ions. These results demonstrate that nanoparticle assembly can be induced, controlled, and to some extent tuned, by exploiting specific molecular interactions involved in polypeptide folding.
|
|
| 10. |
|
|
