| 1. |
- Eskilson, Olof, 1992-, et al.
(författare)
-
Nanocellulose composite wound dressings for real-time pH wound monitoring
- 2023
-
Ingår i: Materials Today Bio. - : Elsevier. - 2590-0064. ; 19
-
Tidskriftsartikel (refereegranskat)abstract
- The skin is the largest organ of the human body. Wounds disrupt the functions of the skin and can have catastrophic consequences for an individual resulting in significant morbidity and mortality. Wound infections are common and can substantially delay healing and can result in non-healing wounds and sepsis. Early diagnosis and treatment of infection reduce risk of complications and support wound healing. Methods for monitoring of wound pH can facilitate early detection of infection. Here we show a novel strategy for integrating pH sensing capabilities in state-of-the-art hydrogel-based wound dressings fabricated from bacterial nanocellulose (BC). A high surface area material was developed by self-assembly of mesoporous silica nanoparticles (MSNs) in BC. By encapsulating a pH-responsive dye in the MSNs, wound dressings for continuous pH sensing with spatiotemporal resolution were developed. The pH responsive BC-based nanocomposites demonstrated excellent wound dressing properties, with respect to conformability, mechanical properties, and water vapor transmission rate. In addition to facilitating rapid colorimetric assessment of wound pH, this strategy for generating functional BC-MSN nanocomposites can be further be adapted for encapsulation and release of bioactive compounds for treatment of hard-to-heal wounds, enabling development of novel wound care materials.
|
|
| 2. |
- Eskilson, Olof, 1992-, et al.
(författare)
-
Self-Assembly of Mechanoplasmonic Bacterial Cellulose-Metal Nanoparticle Composites
- 2020
-
Ingår i: Advanced Functional Materials. - : Wiley-VCH Verlagsgesellschaft. - 1616-301X .- 1616-3028. ; 30:40
-
Tidskriftsartikel (refereegranskat)abstract
- Nanocomposites of metal nanoparticles (NPs) and bacterial nanocellulose (BC) enable fabrication of soft and biocompatible materials for optical, catalytic, electronic, and biomedical applications. Current BC-NP nanocomposites are typically prepared by in situ synthesis of the NPs or electrostatic adsorption of surface functionalized NPs, which limits possibilities to control and tune NP size, shape, concentration, and surface chemistry and influences the properties and performance of the materials. Here a self-assembly strategy is described for fabrication of complex and well-defined BC-NP composites using colloidal gold and silver NPs of different sizes, shapes, and concentrations. The self-assembly process results in nanocomposites with distinct biophysical and optical properties. In addition to antibacterial materials and materials with excellent senor performance, materials with unique mechanoplasmonic properties are developed. The homogenous incorporation of plasmonic gold NPs in the BC enables extensive modulation of the optical properties by mechanical stimuli. Compression gives rise to near-field coupling between adsorbed NPs, resulting in tunable spectral variations and enhanced broadband absorption that amplify both nonlinear optical and thermoplasmonic effects and enables novel biosensing strategies.
|
|
| 3. |
- Ail, Ujwala, 1980-, et al.
(författare)
-
Optimization of Non-Pyrolyzed Lignin Electrodes for Sustainable Batteries
- 2023
-
Ingår i: ADVANCED SUSTAINABLE SYSTEMS. - : WILEY-V C H VERLAG GMBH. - 2366-7486. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- Lignin, a byproduct from the pulp industry, is one of the redox active biopolymers being investigated as a component in the electrodes for sustainable energy storage applications. Due to its insulating nature, it needs to be combined with a conductor such as carbon or conducting polymer for efficient charge storage. Here, the lignin/carbon composite electrodes manufactured via mechanical milling (ball milling) are reported. The composite formation, correlation between performance and morphology is studied by comparison with manual mixing and jet milling. Superior charge storage capacity with approximate to 70% of the total contribution from the Faradaic process involving the redox functionality of lignin is observed in a mechanically milled composite. In comparison, manual mix shows only approximate to 30% from the lignin storage participation while the rest is due to the electric double layer at the carbon-electrolyte interface. The significant participation of lignin in the ball milled composite is attributed to the homogeneous, intimate mixing of the carbon and the lignin leading the electronic carrier transported in the carbon phase to reach most of the redox group of lignin. A maximum capacity of 49 mAh g(-1) is obtained at charge/discharge rate of 0.25 A g(-1) for the sample milled for 60 min.
|
|
| 4. |
- Björk, Emma M., 1981-
(författare)
-
Mesoporous Building Blocks : Synthesis and Characterization of Mesoporous Silica Particles and Films
- 2013
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Catalyst supports, drug delivery systems, hosts for nanoparticles, and solar cells are just some examples of the wide range of exciting applications for mesoporous silica. In order to optimize the performance of a specific application, controlling the material’s morphology and pore size is crucial. For example, short and separated particles are beneficial for drug delivery systems, while for molecular sieves, the pore size is the key parameter.In this thesis, mesoporous silica building blocks, crystallites, with hexagonally ordered cylindrical pores were synthesized, with the aim to understand how the synthesis parameters affect the particle morphology and pore size. The synthesis of the particles is performed using a sol-gel process, and in order to increase the pore size, a combination of low temperature, and additions of heptane and NH4F was used. By variations in the amounts of reagents, as well as other synthesis conditions, the particle morphology and pore size could be altered. Separated particles were also grown on or attached to substrates to form films. Also, a material with spherical pore structure was synthesized, for the first time using this method.It was found that a variation in the heptane concentration, in combination with a long stirring time, yields a transition between fiber and sheet morphologies. Both morphologies consist of crystallites, which for the fibers are joined end to end, while for the sheets they are attached side by side such that the pores are accessible from the sheet surface. The crystallites can be separated to a rod morphology by decreasing the stirring time and tuning the HCl concentration, and it was seen that these rods are formed within 5 min of static time, even though the pore size and unit cell parameters were evolving for another 30 min. Further studies of the effects of heptane showed that the shape and mesoscopic parameters of the rods are affected by the heptane concentration, up to a value where the micelles are fully saturated with heptane. It was also observed that the particle width increases with decreasing NH4F concentration, independent of heptane amount, and a platelet morphology can be formed. The formation time of the particles decrease with decreasing NH4F, and the growth mechanism for platelets was further studied. The pore sizes for various morphologies were altered by e.g. variations in the hydrothermal treatment conditions, or the method for removing the surfactants.The separated particles can be attached to substrates, either during the particle synthesis or by post grafting prior to calcination. The film formation during the one-pot-synthesis was studied and a formation mechanism including nucleation of elongated micelles on the substrate was suggested. During the post grafting film synthesis, the medium in which the particles are dispersed, as well as functionalization of both particle and substrate are crucial for the post grafting process. The pores are easily accessible independent of the method, even though they are aligned parallel to the substrate when the one-pot-method is used, while post grafting gives a perpendicular pore orientation.In summary, this work aims to give an understanding for the formation of the synthesized material, and how to tune the material properties by alterations in parameter space. Successful syntheses of four different particle morphologies and two new types of films were performed, and the pore size could easily be tuned by various methods.
|
|
| 5. |
- Kumar, Divyaratan, 1995-, et al.
(författare)
-
Zinc salt in "Water-in-Polymer Salt Electrolyte" for Zinc-Lignin Batteries: Electroactivity of the Lignin Cathode
- 2023
-
Ingår i: ADVANCED SUSTAINABLE SYSTEMS. - : WILEY-V C H VERLAG GMBH. - 2366-7486. ; 7:4
-
Tidskriftsartikel (refereegranskat)abstract
- Zn-ion batteries are one of the hot candidates for low-cost and sustainable secondary batteries. The hydrogen evolution and dendritic growth upon zinc deposition are todays challenges for that technology. One of the new strategies to cope with these issues is to use "water-in-salt" electrolyte (WISE), that is, super concentrated aqueous electrolytes, to broaden its electrochemical stability window (ESW), suppressing hydrogen evolution reaction (HER), and perturbing the dendritic growth. Herein, this work proposes to use "water-in-polymer salt" electrolyte (WIPSE) concept to mitigate the challenges with Zn ion batteries and bring this technology toward one of the cheapest, greenest, and most sustainable electrodes: Lignin-carbon (L-C) electrode. Potassium polyacrylate (PAAK) as WISE bears out as better electrolyte for L-C electrodes in terms of self-discharge, cyclic stability, and specific capacity compared to conventional electrolyte based on chemically cousin molecule potassium acetate. Zinc bis(trifluoromethanesulfonyl) imide (Zn(TFSI)(2)) added into WIPSE shows deposition and dissolution of Zn in Zn//Zn symmetric cell suggesting that Zn2+ are moving into the polyanionic network. Furthermore, the added bis (trifluor omethanesul fonyl) imide (TFSI-) metal salts trigger a approximate to 40% enhancement of the capacity of L-C electrode. These results show a new promising direction toward the development of cost-effective and sustainable Zn-lignin batteries.
|
|
| 6. |
- Linder, Clara, 1994-
(författare)
-
Catalytically active and corrosion resistant cobalt-based thin films
- 2022
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Oxygen reduction reaction (ORR) has considerable potential for the pro-duction of electricity, issues with water splitting and many other applications in the energy sector. But in order to increase the efficiency of the reaction an electrocatalyst needs to be introduced.In today’s industrial devices precious and costly metals such as platinum (Pt) are used as catalysts. Other more abundant and cheaper alternatives, for example cobalt oxides, are therefore being investigated. In this thesis, pure cobalt (Co) thin films were synthesised to investigate if thin films can be used for the catalysis of ORR. This was successfully carried out by electrochemically modifying the thin films and grow catalytically ac-tive hexagonal cobalt oxide nanoparticles. Multicomponent system CoCrFeNi is an emerging alloy system with high research interest for its high corrosion resistance suitable for harsh environments in which the applications for ORR are found. In this thesis, CoCrFexNi were synthesised as thin films. The corrosion resistance of the films was investigated in addition to their catalytic activity. The effect of Fe content on these properties was also studied. The presence of Fe was crucial for the electrochemical activation of films and catalytic activity towards ORR. In summary, this thesis shows that cobalt based thin films can be used as catalysts combined with corrosion resistance for ORR applications.
|
|
| 7. |
- Linder, Clara, et al.
(författare)
-
Corrosion Resistance and Catalytic Activity toward the Oxygen Reduction Reaction of CoCrFexNi (0 ≤ x ≤ 0.7) Thin Films
- 2022
-
Ingår i: ACS Applied Energy Materials. - : American Chemical Society. - 2574-0962. ; 5:9, s. 10838-10848
-
Tidskriftsartikel (refereegranskat)abstract
- Corrosion resistance and catalytic activity toward the oxygen reduction reaction (ORR) in an alkaline environment are two key properties for water recombination applications. In this work, CoCrFexNi (0 ≤ x ≤ 0.7) thin films were deposited by magnetron sputtering on polished steel substrates. The native passive layer was 2-4 nm thick and coherent to the columnar grains determined by transmission electron microscopy. The effect of Fe on the corrosion properties in 0.1 M NaCl and 1 M KOH and the catalytic activity of the films toward ORR were investigated. Electrochemical impedance spectroscopy and potentiodynamic polarization measurements indicate that CoCrFe0.7Ni and CoCrFe0.3Ni have the highest corrosion resistance of the studied films in NaCl and KOH, respectively. The high corrosion resistance of the CoCrFe0.7Ni film in NaCl was attributed to the smaller overall grain size, which leads to a more homogeneous film with a stronger passive layer. For CoCrFe0.3Ni in KOH, it was attributed to a lower Fe dissolution into the electrolyte and the build-up of a thick and protective hydroxide layer. Scanning Kelvin probe force microscopy showed no potential differences globally in any of the films, but locally, a potential gradient between the top of the columns and grain boundaries was observed. Corrosion of the films was likely initiated at the top of the columns where the potential was lowest. It was concluded that Fe is essential for the electrochemical activation of the surfaces and the catalytic activity toward ORR in an alkaline medium. The highest catalytic activity was recorded for high Fe-content films (x ≥ 0.5) and was attributed to the formation of platelet-like oxide particles on the film surface upon anodization. The study showed that the combination of corrosion resistance and catalytic activity toward ORR is possible for CoCrFexNi, making this material system a suitable candidate for water recombination in an alkaline environment.
|
|
| 8. |
- Liu, Lianlian, 1988-, et al.
(författare)
-
Black Charcoal for Green and Scalable Wooden Electrodes for Supercapabatteries
- 2022
-
Ingår i: Energy Technology. - : Wiley-VCH Verlag GMBH. - 2194-4288 .- 2194-4296. ; 10:3
-
Tidskriftsartikel (refereegranskat)abstract
- A green, though black, sustainable and low-cost carbon material-charcoal produced from wood-is developed for electricity storage. Charcoal electrodes are fabricated by ball-milling charcoal and adding protein nanofibril binders. The charcoal electrode presents a capacitance of 360 F g(-1) and a conductivity of 0.2 S m(-1). A pair of redox peaks is observed in the cyclic voltammetry and assigned to originate from quinone groups. Compared with other wooden electrodes, these charcoal electrodes display better cycling stability with 88% capacity retention after 1000 cycles. Their discharge capacity is 2.5 times that of lignosulfonate/graphite hybrid electrodes.
|
|
| 9. |
|
|
| 10. |
- Paul, Biplab, 1980-, et al.
(författare)
-
Nanoporous Ca3Co4O9 Thin Films for Transferable Thermoelectrics
- 2018
-
Ingår i: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 1:5, s. 2261-2268
-
Tidskriftsartikel (refereegranskat)abstract
- The development of high-performance and transferable thin-film thermoelectric materials is important for low-power applications, e.g., to power wearable electronics, and for on-chip cooling. Nanoporous films offer an opportunity to improve thermoelectric performance by selectively scattering phonons without affecting electronic transport. Here, we report the growth of nanoporous Ca3Co4O9 thin films by a sequential sputtering-annealing method. Ca3Co4O9 is promising for its high Seebeck coefficient and good electrical conductivity and important for its nontoxicity, low cost, and abundance of its constituent raw materials. To grow nanoporous films, multilayered CaO/CoO films were deposited on sapphire and mica substrates by rf-magnetron reactive sputtering from elemental Ca and Co targets, followed by annealing at 700 C to form the final phase of Ca3Co4O9. This phase transformation is accompanied by a volume contraction causing formation of nanopores in the film. The thermoelectric propoperties of the nanoporous Ca3Co4O9 films can be altered by controlling the porosity. The lowest electrical resistivity is ~7 mO cm, yielding a power factor of 2.32 × 10-4 Wm-1K-2 near room temperature. Furthermore, the films are transferable from the primary mica substrates to other arbitrary polymer platforms by simple dry transfer, which opens an opportunity of low-temperature use these materials.
|
|
