| 1. |
- Bruzzi, M, et al.
(författare)
-
Radiation-hard semiconductor detectors for SuperLHC
- 2005
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002. ; 541:1-2, s. 189-201
-
Tidskriftsartikel (refereegranskat)abstract
- An option of increasing the luminosity of the Large Hadron Collider (LHC) at CERN to 1035 cm-2 s-1 has been envisaged to extend the physics reach of the machine. An efficient tracking down to a few centimetres from the interaction point will be required to exploit the physics potential of the upgraded LHC. As a consequence, the semiconductor detectors close to the interaction region will receive severe doses of fast hadron irradiation and the inner tracker detectors will need to survive fast hadron fluences of up to above 1016cm-2. The CERN-RD50 project "Development of Radiation Hard Semiconductor Devices for Very High Luminosity Colliders" has been established in 2002 to explore detector materials and technologies that will allow to operate devices up to, or beyond, this limit. The strategies followed by RD50 to enhance the radiation tolerance include the development of new or defect engineered detector materials (SiC, GaN, Czochralski and epitaxial silicon, oxygen enriched Float Zone silicon), the improvement of present detector designs and the understanding of the microscopic defects causing the degradation of the irradiated detectors. The latest advancements within the RD50 collaboration on radiation hard semiconductor detectors will be reviewed and discussed in this work.
|
|
| 2. |
- Diez, S., et al.
(författare)
-
A double-sided, shield-less stave prototype for the ATLAS Upgrade strip tracker for the High Luminosity LHC
- 2014
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 9, s. P03012-
-
Tidskriftsartikel (refereegranskat)abstract
- A detailed description of the integration structures for the barrel region of the silicon strips tracker of the ATLAS Phase-II upgrade for the upgrade of the Large Hadron Collider, the so-called High Luminosity LHC (HL-LHC), is presented. This paper focuses on one of the latest demonstrator prototypes recently assembled, with numerous unique features. It consists of a shortened, shield-less, and double sided stave, with two candidate power distributions implemented. Thermal and electrical performances of the prototype are presented, as well as a description of the assembly procedures and tools.
|
|
| 3. |
- Poley, L., et al.
(författare)
-
The ABC130 barrel module prototyping programme for the ATLAS strip tracker
- 2020
-
Ingår i: Journal of Instrumentation. - : IOP PUBLISHING LTD. - 1748-0221. ; 15:9
-
Tidskriftsartikel (refereegranskat)abstract
- For the Phase-II Upgrade of the ATLAS Detector [1], its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100% silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-250) [2, 3] and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
|
|
| 4. |
- Gonzalez-Sevilla, S., et al.
(författare)
-
A double-sided silicon micro-strip Super-Module for the ATLAS Inner Detector upgrade in the High-Luminosity LHC
- 2014
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 9, s. P02003-
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS experiment is a general purpose detector aiming to fully exploit the discovery potential of the Large Hadron Collider (LHC) at CERN. It is foreseen that after several years of successful data-taking, the LHC physics programme will be extended in the so-called High-Luminosity LHC, where the instantaneous luminosity will be increased up to 5 x 10(34) cm(-2) s(-1). For ATLAS, an upgrade scenario will imply the complete replacement of its internal tracker, as the existing detector will not provide the required performance due to the cumulated radiation damage and the increase in the detector occupancy. The current baseline layout for the new ATLAS tracker is an all-silicon-based detector, with pixel sensors in the inner layers and silicon micro-strip detectors at intermediate and outer radii. The super-module is an integration concept proposed for the strip region of the future ATLAS tracker, where double-sided stereo silicon micro-strip modules are assembled into a low-mass local support structure. An electrical super-module prototype for eight double-sided strip modules has been constructed. The aim is to exercise the multi-module readout chain and to investigate the noise performance of such a system. In this paper, the main components of the current super-module prototype are described and its electrical performance is presented in detail.
|
|
| 5. |
- Wells, R S, et al.
(författare)
-
The Eurasian heartland : a continental perspective on Y-chromosome diversity.
- 2001
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 98:18, s. 10244-9
-
Tidskriftsartikel (refereegranskat)abstract
- The nonrecombining portion of the human Y chromosome has proven to be a valuable tool for the study of population history. The maintenance of extended haplotypes characteristic of particular geographic regions, despite extensive admixture, allows complex demographic events to be deconstructed. In this study we report the frequencies of 23 Y-chromosome biallelic polymorphism haplotypes in 1,935 men from 49 Eurasian populations, with a particular focus on Central Asia. These haplotypes reveal traces of historical migrations, and provide an insight into the earliest patterns of settlement of anatomically modern humans on the Eurasian continent. Central Asia is revealed to be an important reservoir of genetic diversity, and the source of at least three major waves of migration leading into Europe, the Americas, and India. The genetic results are interpreted in the context of Eurasian linguistic patterns.
|
|
| 6. |
- Qin, Yue, et al.
(författare)
-
A multi-scale map of cell structure fusing protein images and interactions
- 2021
-
Ingår i: Nature. - : Springer Nature. - 0028-0836 .- 1476-4687. ; 600:7889, s. 536-
-
Tidskriftsartikel (refereegranskat)abstract
- The cell is a multi-scale structure with modular organization across at least four orders of magnitude(1). Two central approaches for mapping this structure-protein fluorescent imaging and protein biophysical association-each generate extensive datasets, but of distinct qualities and resolutions that are typically treated separately(2,3). Here we integrate immunofluorescence images in the Human Protein Atlas(4) with affinity purifications in BioPlex(5) to create a unified hierarchical map of human cell architecture. Integration is achieved by configuring each approach as a general measure of protein distance, then calibrating the two measures using machine learning. The map, known as the multi-scale integrated cell (MuSIC 1.0), resolves 69 subcellular systems, of which approximately half are to our knowledge undocumented. Accordingly, we perform 134 additional affinity purifications and validate subunit associations for the majority of systems. The map reveals a pre-ribosomal RNA processing assembly and accessory factors, which we show govern rRNA maturation, and functional roles for SRRM1 and FAM120C in chromatin and RPS3A in splicing. By integration across scales, MuSIC increases the resolution of imaging while giving protein interactions a spatial dimension, paving the way to incorporate diverse types of data in proteome-wide cell maps.
|
|
| 7. |
- Tofeldt, Oskar, et al.
(författare)
-
Investigation of fundamental ultrasonic propagation characteristics in NDT of Electron Beam Melted additive manufactured samples : Inconel 718
- 2018
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- New approaches for efficient NDT inspection of modern additively manufactured metallic components are required urgently to qualify and validate the next generation of metallic parts across a range of industries. Ultrasonic testing is a fundamental component of NDT for such additive manufacturing processes. This work studies the ultrasonic propagation characteristics of EBM manufactured sample coupons in Inconel 718material. Fundamental longitudinal and shear wave velocity measurements are experimentally measured in 3 orthogonal build directions of the sample coupons. Results show a dependency of the ultrasonic velocities and the build direction. The measured velocities are further verified in a phased array measurement showing successful results that highlights the potential of continued studies with synthetic apertures techniques.
|
|
