| 1. |
- Litjens, Carlijn H. C., et al.
(författare)
-
Protein binding of rifampicin is not saturated when using high-dose rifampicin
- 2019
-
Ingår i: Journal of Antimicrobial Chemotherapy. - : OXFORD UNIV PRESS. - 0305-7453 .- 1460-2091. ; 74:4, s. 986-990
-
Tidskriftsartikel (refereegranskat)abstract
- Background Higher doses of rifampicin are being investigated as a means to optimize response to this pivotal TB drug. It is unknown whether high-dose rifampicin results in saturation of plasma protein binding and a relative increase in protein-unbound (active) drug concentrations. Objectives To assess the free fraction of rifampicin based on an in vitro experiment and data from a clinical trial on high-dose rifampicin. Methods Protein-unbound rifampicin concentrations were measured in human serum spiked with increasing total concentrations (up to 64mg/L) of rifampicin and in samples obtained by intensive pharmacokinetic sampling of patients who used standard (10mg/kg daily) or high-dose (35mg/kg) rifampicin up to steady-state. The performance of total AUC(0-24) to predict unbound AUC(0-24) was evaluated. Results The in vitro free fraction of rifampicin remained unaltered (approximate to 9%) up to 21mg/L and increased up to 13% at 41mg/L and 17% at 64mg/L rifampicin. The highest (peak) concentration in vivo was 39.1mg/L (high-dose group). The arithmetic mean percentage unbound to total AUC(0-24)in vivo was 13.3% (range=8.1%-24.9%) and 11.1% (range=8.6%-13.6%) for the standard group and the high-dose group, respectively (P=0.214). Prediction of unbound AUC(0-24) based on total AUC(0-24) resulted in a bias of -0.05% and an imprecision of 13.2%. Conclusions Plasma protein binding of rifampicin can become saturated, but exposures after high-dose rifampicin are not high enough to increase the free fraction in TB patients with normal albumin values. Unbound rifampicin exposures can be predicted from total exposures, even in the higher dose range.
|
|
| 2. |
- Ayoun Alsoud, Rami, et al.
(författare)
-
Combined quantitative tuberculosis biomarker model for time-to-positivity and colony forming unit to support tuberculosis drug development
- 2023
-
Ingår i: Frontiers in Pharmacology. - : Frontiers Media S.A.. - 1663-9812. ; 14
-
Tidskriftsartikel (refereegranskat)abstract
- Biomarkers are quantifiable characteristics of biological processes. In Mycobacterium tuberculosis, common biomarkers used in clinical drug development are colony forming unit (CFU) and time-to-positivity (TTP) from sputum samples. This analysis aimed to develop a combined quantitative tuberculosis biomarker model for CFU and TTP biomarkers for assessing drug efficacy in early bactericidal activity studies. Daily CFU and TTP observations in 83 previously patients with uncomplicated pulmonary tuberculosis after 7 days of different rifampicin monotherapy treatments (10-40 mg/kg) from the HIGHRIF1 study were included in this analysis. The combined quantitative tuberculosis biomarker model employed the Multistate Tuberculosis Pharmacometric model linked to a rifampicin pharmacokinetic model in order to determine drug exposure-response relationships on three bacterial sub-states using both the CFU and TTP data simultaneously. CFU was predicted from the MTP model and TTP was predicted through a time-to-event approach from the TTP model, which was linked to the MTP model through the transfer of all bacterial sub-states in the MTP model to a one bacterial TTP model. The non-linear CFU-TTP relationship over time was well predicted by the final model. The combined quantitative tuberculosis biomarker model provides an efficient approach for assessing drug efficacy informed by both CFU and TTP data in early bactericidal activity studies and to describe the relationship between CFU and TTP over time.
|
|
| 3. |
|
|
| 4. |
- Diaz, Jessica M. Aguilar, et al.
(författare)
-
New and Repurposed Drugs for the Treatment of Active Tuberculosis : An Update for Clinicians
- 2023
-
Ingår i: Respiration. - : S. Karger. - 0025-7931 .- 1423-0356. ; 102:2, s. 83-100
-
Forskningsöversikt (refereegranskat)abstract
- Although tuberculosis (TB) is preventable and curable, the lengthy treatment (generally 6 months), poor patient adherence, high inter-individual variability in pharmacokinetics (PK), emergence of drug resistance, presence of comorbidities, and adverse drug reactions complicate TB therapy and drive the need for new drugs and/or regimens. Hence, new compounds are being developed, available drugs are repurposed, and the dosing of existing drugs is optimized, resulting in the largest drug development portfolio in TB history. This review highlights a selection of clinically available drug candidates that could be part of future TB regimens, including bedaquiline, delamanid, pretomanid, linezolid, clofazimine, optimized (high dose) rifampicin, rifapentine, and para-aminosalicylic acid. The review covers drug development history, preclinical data, PK, and current clinical development.
|
|
| 5. |
- Litjens, Carlijn H. C., et al.
(författare)
-
Prediction of Moxifloxacin Concentrations in Tuberculosis Patient Populations by Physiologically Based Pharmacokinetic Modeling
- 2022
-
Ingår i: Journal of clinical pharmacology. - : John Wiley & Sons. - 0091-2700 .- 1552-4604. ; 62:3, s. 385-396
-
Tidskriftsartikel (refereegranskat)abstract
- Moxifloxacin has an important role in the treatment of tuberculosis (TB). Unfortunately, coadministration with the cornerstone TB drug rifampicin results in suboptimal plasma exposure. We aimed to gain insight into the moxifloxacin pharmacokinetics and the interaction with rifampicin. Moreover, we provided a mechanistic framework to understand moxifloxacin pharmacokinetics. We developed a physiologically based pharmacokinetic model in Simcyp version 19, with available and newly generated in vitro and in vivo data, to estimate pharmacokinetic parameters of moxifloxacin alone and when administered with rifampicin. By combining these strategies, we illustrate that the role of P-glycoprotein in moxifloxacin transport is limited and implicate MRP2 as transporter of moxifloxacin-glucuronide followed by rapid hydrolysis in the gut. Simulations of multiple dose area under the plasma concentration-time curve (AUC) of moxifloxacin (400 mg once daily) with and without rifampicin (600 mg once daily) were in accordance with clinically observed data (predicted/observed [P/O] ratio of 0.87 and 0.80, respectively). Importantly, increasing the moxifloxacin dose to 600 mg restored the plasma exposure both in actual patients with TB as well as in our simulations. Furthermore, we extrapolated the single dose model to pediatric populations (P/O AUC ratios, 1.04-1.52) and the multiple dose model to children with TB (P/O AUC ratio, 1.51). In conclusion, our combined approach resulted in new insights into moxifloxacin pharmacokinetics and accurate simulations of moxifloxacin exposure with and without rifampicin. Finally, various knowledge gaps were identified, which may be considered as avenues for further physiologically based pharmacokinetic refinement.
|
|
| 6. |
- Stemkens, Ralf, et al.
(författare)
-
Drug interaction potential of high-dose rifampicin in patients with pulmonary tuberculosis
- 2023
-
Ingår i: Antimicrobial Agents and Chemotherapy. - : American Society for Microbiology. - 0066-4804 .- 1098-6596. ; 67:10
-
Tidskriftsartikel (refereegranskat)abstract
- Accumulating evidence supports the use of higher doses of rifampicin for tuberculosis (TB) treatment. Rifampicin is a potent inducer of metabolic enzymes and drug transporters, resulting in clinically relevant drug interactions. To assess the drug interaction potential of higher doses of rifampicin, we compared the effect of high-dose rifampicin (40 mg/kg daily, RIF40) and standard-dose rifampicin (10 mg/kg daily, RIF10) on the activities of major cytochrome P450 (CYP) enzymes and P-glycoprotein (P-gp). In this open-label, single-arm, two-period, fixed-order phenotyping cocktail study, adult participants with pulmonary TB received RIF10 (days 1–15), followed by RIF40 (days 16–30). A single dose of selective substrates (probe drugs) was administered orally on days 15 and 30: caffeine (CYP1A2), tolbutamide (CYP2C9), omeprazole (CYP2C19), dextromethorphan (CYP2D6), midazolam (CYP3A), and digoxin (P-gp). Intensive pharmacokinetic blood sampling was performed over 24 hours after probe drug intake. In all, 25 participants completed the study. Geometric mean ratios (90% confidence interval) of the total exposure (area under the concentration versus time curve, RIF40 versus RIF10) for each of the probe drugs were as follows: caffeine, 105% (96%–115%); tolbutamide, 80% (74%–86%); omeprazole, 55% (47%–65%); dextromethorphan, 77% (68%–86%); midazolam, 62% (49%–78%), and 117% (105%–130%) for digoxin. In summary, high-dose rifampicin resulted in no additional effect on CYP1A2, mild additional induction of CYP2C9, CYP2C19, CYP2D6, and CYP3A, and marginal inhibition of P-gp. Existing recommendations on managing drug interactions with rifampicin can remain unchanged for the majority of co-administered drugs when using high-dose rifampicin. Clinical Trials registration number NCT04525235.
|
|
| 7. |
- Susanto, Budi O., et al.
(författare)
-
Model-based analysis of bactericidal activity and a new dosing strategy for optimised-dose rifampicin
- 2023
-
Ingår i: International Journal of Antimicrobial Agents. - : Elsevier. - 0924-8579 .- 1872-7913. ; 61:6
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundHigher doses of rifampicin for tuberculosis have been shown to improve early bactericidal activity (EBA) and at the same time increase the intolerability due to high exposure at the beginning of treatment. To support dose optimisation of rifampicin, this study investigated new and innovative staggered dosing of rifampicin using clinical trial simulations to minimise tolerability problems and still achieve good efficacy.MethodsRifampicin population pharmacokinetics and time-to-positivity models were applied to data from patients receiving 14 days of daily 10–50 mg/kg rifampicin to characterise the exposure-response relationship. Furthermore, clinical trial simulations of rifampicin exposure were performed following four different staggered dosing scenarios. The simulated exposure after 35 mg/kg was used as a relative comparison for efficacy. Tolerability was derived from a previous model-based analysis relating exposure at day 7 and the probability of having adverse events.ResultsThe linear relationship between rifampicin exposure and bacterial killing rate in sputum indicated that the maximum rifampicin EBA was not reached at doses up to 50 mg/kg. Clinical trial simulations of a staggered dosing strategy starting the treatment at a lower dose (20 mg/kg) for 7 days followed by a higher dose (40 mg/kg) predicted a lower initial exposure with lower probability of tolerability problems and better EBA compared with a regimen of 35 mg/kg daily.ConclusionsStaggered dosing of 20 mg/kg for 7 days followed by 40 mg/kg is predicted to reduce tolerability while maintaining exposure levels associated with better efficacy.
|
|
| 8. |
- Susanto, Budi Octasari, et al.
(författare)
-
Rifampicin can be given as flat-dosing instead of weight-band dosing
- 2020
-
Ingår i: Clinical Infectious Diseases. - : Oxford University Press (OUP). - 1058-4838 .- 1537-6591. ; 71:12, s. 3055-3060
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: The weight-band dosing in tuberculosis treatment regimen has been implemented in clinical practice for decades. Patients will receive different number of fixed dose combination (FDC) tablets according to their weight-band. However, some analysis have shown that weight was not the best covariate to explain variability of rifampicin exposure. Furthermore, the rationale for using weight-band dosing instead of flat-dosing becomes questionable. Therefore, this study aimed to compare the average and the variability of rifampicin exposure after weight-band dosing and flat-dosing.METHODS: Rifampicin exposure were simulated using previously published population pharmacokinetics model at dose 10-40 mg/kg for weight-band dosing and dose 600-2400 mg for flat-dosing. The median AUC0-24h after day 7 and 14 were compared as well as the variability of each dose group between weight-band and flat-dosing.RESULTS: The difference of median AUC0-24h of all dose groups between flat-dosing and weight-band dosing were considered low (< 20%) except for the lowest dose. At the dose of 10 mg/kg (600 mg for flat-dosing), flat-dosing resulted in higher median AUC0-24h compared to the weight-band dosing. A marginal decrease in between-patient variability was predicted for weight-band dosing compared to flat-dosing.CONCLUSIONS: Weight-band dosing yields a small and non-clinically relevant decrease in variability of AUC0-24h.
|
|
| 9. |
- Svensson, Elin M., 1985-, et al.
(författare)
-
The Potential for Treatment Shortening With Higher Rifampicin Doses : Relating Drug Exposure to Treatment Response in Patients With Pulmonary Tuberculosis
- 2018
-
Ingår i: Clinical Infectious Diseases. - : OXFORD UNIV PRESS INC. - 1058-4838 .- 1537-6591. ; 67:1, s. 34-41
-
Tidskriftsartikel (refereegranskat)abstract
- Background. Tuberculosis remains a huge public health problem and the prolonged treatment duration obstructs effective tuberculosis control. Higher rifampicin doses have been associated with better bactericidal activity, but optimal dosing is uncertain. This analysis aimed to characterize the relationship between rifampicin plasma exposure and treatment response over 6 months in a recent study investigating the potential for treatment shortening with high-dose rifampicin. Methods. Data were analyzed from 336 patients with pulmonary tuberculosis (97 with pharmacokinetic data) treated with rifampicin doses of 10, 20, or 35 mg/kg. The response measure was time to stable sputum culture conversion (TSCC). We derived individual exposure metrics with a previously developed population pharmacokinetic model of rifampicin. TSCC was modeled using a parametric time-to-event approach, and a sequential exposure-response analysis was performed. Results. Higher rifampicin exposures increased the probability of early culture conversion. No maximal limit of the effect was detected within the observed range. The expected proportion of patients with stable culture conversion on liquid medium at week 8 was predicted to increase from 39% (95% confidence interval, 37%-41%) to 55% (49%-61%), with the rifampicin area under the curve increasing from 20 to 175 mg/L.h (representative for 10 and 35 mg/kg, respectively). Other predictors of TSCC were baseline bacterial load, proportion of culture results unavailable, and substitution of ethambutol for either moxifloxacin or SQ109. Conclusions. Increasing rifampicin exposure shortened TSCC, and the effect did not plateau, indicating that doses >35 mg/kg could be yet more effective. Optimizing rifampicin dosage while preventing toxicity is a clinical priority.
|
|
| 10. |
- Svensson, Robin J., et al.
(författare)
-
A Population Pharmacokinetic Model Incorporating Saturable Pharmacokinetics and Autoinduction for High Rifampicin Doses
- 2018
-
Ingår i: Clinical Pharmacology and Therapeutics. - : Wiley. - 0009-9236 .- 1532-6535. ; 103:4, s. 674-683
-
Tidskriftsartikel (refereegranskat)abstract
- Accumulating evidence suggests that increasing doses of rifampicin may shorten tuberculosis treatment. The PanACEA HIGHRIF1 trial assessed safety, pharmacokinetics, and antimycobacterial activity of rifampicin at doses up to 40 mg/kg. Eighty-three pulmonary tuberculosis patients received 10, 20, 25, 30, 35, or 40 mg/kg rifampicin daily over 2 weeks, supplemented with standard doses of isoniazid, pyrazinamide, and ethambutol in the second week. This study aimed at characterizing rifampicin pharmacokinetics observed in HIGHRIF1 using nonlinear mixed effects modeling. The final population pharmacokinetic model included an enzyme turnover model accounting for time-dependent elimination due to autoinduction, concentration-dependent clearance, and dose-dependent bioavailability. The relationship between clearance and concentration was characterized by a Michaelis–Menten relationship. The relationship between bioavailability and dose was described using an Emax relationship. The model will be key in determining exposure–response relationships for rifampicin and should be considered when designing future trials and when treating future patients with high-dose rifampicin.
|
|
