1. |
- Boulanger, Nicolas, et al.
(författare)
-
Spray deposition of supercapacitor electrodes using environmentally friendly aqueous activated graphene and activated carbon dispersions for industrial implementation
- 2021
-
Ingår i: ChemElectroChem. - : John Wiley & Sons. - 2196-0216. ; 8:7, s. 1349-1361
-
Tidskriftsartikel (refereegranskat)abstract
- A spray gun machine was used to deposit high‐surface‐area supercapacitor electrodes using green non‐toxic aqueous dispersions based on different kinds of high specific surface area nanostructured carbon materials: activated graphene (a‐rGO) and activated carbon (AC). Tuning the spray conditions and dispersion formulation allowed us to achieve good adhesion to stainless‐steel current collectors in combination with high surface area and a satisfactory mechanical stability of the electrodes. The specific surface area of approximately 2000 m2/g was measured directly on a‐rGO and AC electrodes showing only around a 20 % decrease compared to the precursor powder materials. The performance of the electrodes deposited on stainless‐steel and aluminum current collectors was tested in supercapacitor devices using three electrolytes. The electrodes were tested in an “as‐deposited” state and after post‐deposition annealing at 200 °C. The spray deposition method and post‐deposition annealing are completely compatible with roll‐to‐roll industrial production methods. The a‐rGO demonstrated superior performance compared to AC in supercapacitor electrodes with gravimetric capacitance, energy, and power density parameters, which exceed commercially available analogues. The formulation of the dispersions used in this study is environmentally friendly, as it is based on only on water as a solvent and commercially available non‐toxic additives (graphene oxide, fumed silica, and carbon nanotubes).
|
|
2. |
- Nordenström, Andreas, et al.
(författare)
-
High-surface-area activated carbon from pine cones for semi-industrial spray deposition of supercapacitor electrodes
- 2022
-
Ingår i: Nanoscale Advances. - : Royal Society of Chemistry. - 2516-0230. ; 4:21, s. 4689-4700
-
Tidskriftsartikel (refereegranskat)abstract
- High surface area carbons are so far the best materials for industrial manufacturing of supercapacitor electrodes. Here we demonstrate that pine cones, an abundant bio-precursor currently considered as a waste in the wood industry, can be used to prepare activated carbons with a BET surface area exceeding 3000 m2 g−1. It is found that the same KOH activation procedure applied to reduced graphene oxide (rGO) and pine cone derived biochars results in carbon materials with a similar surface area, pore size distribution and performance in supercapacitor (SC) electrodes. It can be argued that “activated graphene” and activated carbon are essentially the same kind of material with a porous 3D structure. It is demonstrated that the pine cone derived activated carbon (PC-AC) can be used as a main part of aqueous dispersions stabilized by graphene oxide for spray deposition of electrodes. The PC-AC based electrodes prepared using a semi-industrial spray gun machine and laboratory scale blade deposition of these dispersions were compared to pellet electrodes.
|
|
3. |
- Quesnel, Etienne, et al.
(författare)
-
Graphene-based technologies for energy applications, challenges and perspectives
- 2015
-
Ingår i: Current Opinion in Chemical Engineering. - : IOP Publishing. - 2211-3398. ; 2:3, s. 1-16
-
Tidskriftsartikel (refereegranskat)abstract
- Here we report on technology developments implemented into the Graphene Flagship European project for the integration of graphene and graphene-related materials (GRMs) into energy application devices. Many of the technologies investigated so far aim at producing composite materials associating graphene or GRMs with either metal or semiconducting nanocrystals or other carbon nanostructures (e.g., CNT, graphite). These composites can be used favourably as hydrogen storage materials or solar cell absorbers. They can also provide better performing electrodes for fuel cells, batteries, or supercapacitors. For photovoltaic (PV) electrodes, where thin layers and interface engineering are required, surface technologies are preferred. We are using conventional vacuum processes to integrate graphene as well as radically new approaches based on laser irradiation strategies. For each application, the potential of implemented technologies is then presented on the basis of selected experimental and modelling results. It is shown in particular how some of these technologies can maximize the benefit taken from GRM integration. The technical challenges still to be addressed are highlighted and perspectives derived from the running works emphasized.
|
|