| 1. |
- Bubnova, Olga, et al.
(författare)
-
Advantageous thermoelectric properties of a semimetallic polymer
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Thermoelectric generation potentially holds a solution for waste heat recovery issues provided that the availability of inexpensive, biodegradable and highly efficient thermoelectric materials is insured in the near future. Plastic thermoelectrics could successfully comply with the said requirements if the thermoelectric efficiency (ZT) of conducting polymers was higher. However, given the novelty of the subject, at present there are no clear guidelines for ZT optimization in this class of materials. The most important piece of information that is currently missing is the description of a specific electronic makeup that conducting polymers must possess in order to enable good thermoelectric performance. In the present study the thermoelectric properties of poly(3,4-ethylenedioxythiophene) derivatives with two types of counterions, i.e. poly(styrenesulfonate) (PSS) and tosylate (Tos) are evaluated. A striking variation in their thermoelectric performance is attributed to structural and morphological differences between two polymers that manifest itself in dissimilar charge transport mechanism. The superior properties of PEDOT-Tos presumably originate from a high degree of crystallinity and structural order that predetermines the tendency for bipolaron band formation. Unlike polaronic PEDOT-PSS with slowly varying density of localized states (DOS) near the Fermi level (EF), the DOS in PEDOT-Tos is characterized by higher asymmetry and higher charge carrier density at EF (similar to semimetals), which allows for higher thermopower and electrical conductivity. Therefore, we conclude that the polymers with semimetallic electronic makeup are expected to exhibit promising thermoelectric properties with bigger variation in thermopower upon doping.
|
|
| 2. |
- Bubnova, Olga, et al.
(författare)
-
Corrigendum: Semi-metallic polymers
- 2014
-
Ingår i: Nature Materials. - : Springer Science and Business Media LLC. - 1476-1122 .- 1476-4660. ; 13, s. 662-662
-
Tidskriftsartikel (refereegranskat)
|
|
| 3. |
- Bubnova, Olga, et al.
(författare)
-
Semi-metallic polymers
- 2014
-
Ingår i: Nature Materials. - : Nature Publishing Group. - 1476-1122 .- 1476-4660. ; 13:2, s. 190-194
-
Tidskriftsartikel (refereegranskat)abstract
- Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies demonstrated that they can possess insulating, semiconducting or metallic properties; here we report that polymers can also be semi-metallic. Semi-metals, exemplified by bismuth, graphite and telluride alloys, have no energy bandgap and a very low density of states at the Fermi level. Furthermore, they typically have a higher Seebeck coefficient and lower thermal conductivities compared with metals, thus being suitable for thermoelectric applications. We measure the thermoelectric properties of various poly( 3,4-ethylenedioxythiophene) samples, and observe a marked increase in the Seebeck coefficient when the electrical conductivity is enhanced through molecular organization. This initiates the transition from a Fermi glass to a semi-metal. The high Seebeck value, the metallic conductivity at room temperature and the absence of unpaired electron spins makes polymer semi-metals attractive for thermoelectrics and spintronics.
|
|
| 4. |
- Risinggård, Helene Kjær, et al.
(författare)
-
Degradation of the chemotherapy drug 5-fluorouracil on medical-grade silver surfaces
- 2018
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332. ; 435, s. 1213-1219
-
Tidskriftsartikel (refereegranskat)abstract
- The degradation of the chemotherapy drug 5-fluorouracil by a non-pristine metal surfaces is studied. Using density functional theory, X-ray photoelectron spectroscopy and X-ray absorption spectroscopy we show that the drug is entirely degraded by medical-grade silver surfaces, already at body temperature, and that all of the fluorine has left the molecule, presumably as HF. Remarkably, this degradation is even more severe than that reported previously for 5-fluorouracil on a pristine monocrystalline silver surface (in which case 80% of the drug reacted at body temperature) [1]. We conclude that the observed reaction is due to a reaction pathway, driven by H to F attraction between molecules on the surface, which results in the direct formation of HF; a pathway which is favoured when competing pathways involving reactive Ag surface sites are made unavailable by environmental contamination. Our measurements indicate that realistically cleaned, non-pristine silver alloys, which are typically used in medical applications, can result in severe degradation of 5-fluorouracil, with the release of HF – a finding which may have important implications for the handling of chemotherapy drugs.
|
|
| 5. |
- Simonsen, J. B., et al.
(författare)
-
Columnar Self-Assembly and Alignment of Planar Carbenium Ions in Langmuir-Blodgett Films
- 2011
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 1520-5827 .- 0743-7463. ; 27:2, s. 792-799
-
Tidskriftsartikel (refereegranskat)abstract
- Structural and optical properties of multilayer Langmuir-Blodgett (LB) films of two amphiphilic carbenium salts 2-didecylamino-6,10-bis(dimethylamino)-4,8,12-trioxatriangulenium hexafluorophosphate (ATOTA-1) and 2,6-bis-(decylmethylamino)-10-dimethylamino-4,8,12-trioxatriangulenium hexafluorophosphate (ATOTA-2) are described. The LB films were prepared on lipophilic glass by standard vertical dipping. Grazing incidence X-ray diffraction (GIXD) measurements show that the planar organic cores, in spite of their positive charge, form closely packed columns with a repeating distance of similar to 3.45 angstrom. Specular X-ray reflectivity (SXR) reveals the LB multilayers to consist of Y-type bilayers with thickness 31 angstrom for ATOTA-1 and 41 angstrom for ATOTA-2. This significant difference is ascribed to the different packing motifs of the alkyl chains in the two LB films. GIXD and polarized UV-vis absorption and emission spectroscopy show that the columnar aggregates in the LB films are oriented along the dipping direction. This alignment is attributed to shear effects during LB transfer. The main absorption band of the LB films is blue-shifted compared to that in solution, while the fluorescence is red-shifted by more than 100 nm. These findings suggest the presence of H-aggregates in agreement with the cofacial packing derived from the X-ray measurements. Polarized absorption spectroscopy with variable angle of incidence was used to resolve two perpendicular optical transitions in the visible range, one at 460 nm polarized perpendicular to the columnar direction, in the plane of the film, and one at 420 nm polarized along the film normal.
|
|
| 6. |
- Müller, Christian, et al.
(författare)
-
Micro X-ray diffraction mapping of a fluorene copolymer fibre
- 2013
-
Ingår i: Polymer. - : Elsevier. - 0032-3861 .- 1873-2291. ; 54:2, s. 805-811
-
Tidskriftsartikel (refereegranskat)abstract
- Using raster-scanning wide-angle X-ray scattering, we investigate oriented fibres of the low bandgap conjugated polymer, poly[2,7-(9,9-dioctylfluorene)-alt-5,5-(4,7-di-2-thienyl-2,1,3-benzothiadiazole)] (F8TBT), that was developed in particular for polymer solar cells. For the first time, structural data are provided for F8TBT. Our results demonstrate that the nano-scale structure of this polymer is closely related to the externally observable features of the fibre, and thus emphasise the importance of having full control over the local molecular conformation. Liquid-crystalline phases are observed at elevated temperatures, and the molecular alignment in the drawn fibres yields scattering patterns that are dominated by broad peaks of equatorial diffuse scattering. The significant degree of preferred orientation facilitates the analysis, leading to estimates of (average) nearest-neighbour packing distances and coherence length of this macromolecule. In particular, we observe a pronounced broad signal assigned to packing of the conjugated backbone with an approximate spacing of 4.00-4.39 angstrom that is coherent over 5-6 polymer segments.
|
|
| 7. |
- Murer, Fredrik K., et al.
(författare)
-
3D Maps of Mineral Composition and Hydroxyapatite Orientation in Fossil Bone Samples Obtained by X-ray Diffraction Computed Tomography
- 2018
-
Ingår i: Scientific Reports. - : NATURE PUBLISHING GROUP. - 2045-2322. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- Whether hydroxyapatite (HA) orientation in fossilised bone samples can be non-destructively retrieved and used to determine the arrangement of the bone matrix and the location of muscle attachments (entheses), is a question of high relevance to palaeontology, as it facilitates a detailed understanding of the (micro-)anatomy of extinct species with no damage to the precious fossil specimens. Here, we report studies of two fossil bone samples, specifically the tibia of a 300-million-year-old tetrapod, Discosauriscus austriacus, and the humerus of a 370-million-year-old lobe-finned fish, Eusthenopteron foordi, using XRD-CT - a combination of X-ray diffraction (XRD) and computed tomography (CT). Reconstructed 3D images showing the spatial mineral distributions and the local orientation of HA were obtained. For Discosauriscus austriacus, details of the muscle attachments could be discerned. For Eusthenopteron foordi, the gross details of the preferred orientation of HA were deduced using three tomographic datasets obtained with orthogonally oriented rotation axes. For both samples, the HA in the bone matrix exhibited preferred orientation, with the unit cell c-axis of the HA crystallites tending to be parallel with the bone surface. In summary, we have demonstrated that XRD-CT combined with an intuitive reconstruction procedure is becoming a powerful tool for studying palaeontological samples.
|
|
| 8. |
- Mürer, Fredrik K., et al.
(författare)
-
Quantifying the hydroxyapatite orientation near the ossification front in a piglet femoral condyle using X-ray diffraction tensor tomography
- 2021
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322 .- 2045-2322. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- While a detailed knowledge of the hierarchical structure and morphology of the extracellular matrix is considered crucial for understanding the physiological and mechanical properties of bone and cartilage, the orientation of collagen fibres and carbonated hydroxyapatite (HA) crystallites remains a debated topic. Conventional microscopy techniques for orientational imaging require destructive sample sectioning, which both precludes further studies of the intact sample and potentially changes the microstructure. In this work, we use X-ray diffraction tensor tomography to image non-destructively in 3D the HA orientation in a medial femoral condyle of a piglet. By exploiting the anisotropic HA diffraction signal, 3D maps showing systematic local variations of the HA crystallite orientation in the growing subchondral bone and in the adjacent mineralized growth cartilage are obtained. Orientation maps of HA crystallites over a large field of view (~ 3 × 3 × 3 mm3) close to the ossification (bone-growth) front are compared with high-resolution X-ray propagation phase-contrast computed tomography images. The HA crystallites are found to predominantly orient with their crystallite c-axis directed towards the ossification front. Distinct patterns of HA preferred orientation are found in the vicinity of cartilage canals protruding from the subchondral bone. The demonstrated ability of retrieving 3D orientation maps of bone-cartilage structures is expected to give a better understanding of the physiological properties of bones, including their propensity for bone-cartilage diseases.
|
|
