| 1. |
- Bott, Lukas Thomas, et al.
(författare)
-
Coulomb dissociation of O-16 into He-4 and C-12
- 2023
-
Ingår i: NUCLEAR PHYSICS IN ASTROPHYSICS - X, NPA-X 2022. - : EDP Sciences. - 2100-014X. ; 279
-
Konferensbidrag (refereegranskat)abstract
- We measured the Coulomb dissociation of O-16 into He-4 and C-12 within the FAIR Phase-0 program at GSI Helmholtzzentrum fur Schwerionenforschung Darmstadt, Germany. From this we will extract the photon dissociation cross section O-16(alpha,gamma)C-12, which is the time reversed reaction to C-12(alpha,gamma)O-16. With this indirect method, we aim to improve on the accuracy of the experimental data at lower energies than measured so far. The expected low cross section for the Coulomb dissociation reaction and close magnetic rigidity of beam and fragments demand a high precision measurement. Hence, new detector systems were built and radical changes to the (RB)-B-3 setup were necessary to cope with the high-intensity O-16 beam. All tracking detectors were designed to let the unreacted O-16 ions pass, while detecting the C-12 and He-4.
|
|
| 2. |
- Gobel, K., et al.
(författare)
-
Coulomb dissociation of 16O into 4He and 12C
- 2020
-
Ingår i: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 1668:1
-
Konferensbidrag (refereegranskat)abstract
- We measured the Coulomb dissociation of 16O into 4He and 12C at the R3B setup in a first campaign within FAIR Phase 0 at GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt. The goal was to improve the accuracy of the experimental data for the 12C(a,?)16O fusion reaction and to reach lower center-ofmass energies than measured so far. The experiment required beam intensities of 109 16O ions per second at an energy of 500 MeV/nucleon. The rare case of Coulomb breakup into 12C and 4He posed another challenge: The magnetic rigidities of the particles are so close because of the same mass-To-charge-number ratio A/Z = 2 for 16O, 12C and 4He. Hence, radical changes of the R3B setup were necessary. All detectors had slits to allow the passage of the unreacted 16O ions, while 4He and 12C would hit the detectors' active areas depending on the scattering angle and their relative energies. We developed and built detectors based on organic scintillators to track and identify the reaction products with sufficient precision.
|
|
| 3. |
- Polenz, Stefan, et al.
(författare)
-
Development of a system for additive manufacturing of ceramic matrix composite structures using laser technology
- 2021
-
Ingår i: Materials. - : MDPI. - 1996-1944. ; 14:12
-
Tidskriftsartikel (refereegranskat)abstract
- Ceramic matrix composites (CMCs) are refractory ceramic materials with damage-tolerant behavior. Coming from the space industry, this class of materials is increasingly being used in other applications, such as automotive construction for high-performance brake discs, furnace technology, heat coatings for pipe systems and landing flaps on reusable rocket sections. In order to produce CMC faster and more cost-efficiently for the increasing demand, a new additive manufacturing process is being tested, which in the future should also be able to realize material joints and higher component wall thicknesses than conventional processes. The main features of the process are as follows. A ceramic fiber bundle is de-sized and infiltrated with ceramic suspension. The bundle infiltrated with matrix material is dried and then applied to a body form. During application, the matrix material is melted by laser radiation without damaging the fiber material. For the initial validation of the material system, samples are pressed and analyzed for their absorption properties using integrating sphere measurement. With the results, a suitable processing laser is selected, and initial melting tests of the matrix system are carried out. After the first validation of the process, a test system is set up, and the first test specimens are produced to determine the material parameters.
|
|
| 4. |
- Sguazzin, M., et al.
(författare)
-
Determining neutron-induced reaction cross sections through surrogate reactions at storage rings
- 2023
-
Ingår i: Journal of Physics: Conference Series. - 1742-6588 .- 1742-6596. ; 2586:1
-
Konferensbidrag (refereegranskat)abstract
- Determining the cross sections of neutron-induced reactions on short-lived nuclei is imperative to rate calculations in stellar nucleosynthesis and applications of nuclear physics. It is also an immense experimental challenge due to the radioactivity of the targets involved. Our goal is to circumvent this obstacle by using surrogate reactions in inverse kinematics at the heavy-ion storage rings of GSI/FAIR. We present here preliminary results from the first proof of principle experiment, where a beam of 208Pb impinged on a H2 gas jet target in the Experimental Storage Ring (ESR).
|
|
