| 1. |
- Tronin, Andrei, et al.
(författare)
-
Study of the Relationship between the Average Annual Temperature of Atmospheric Air and the Number of Tick-Bitten Humans in the North of European Russia
- 2020
-
Ingår i: International Journal of Environmental Research and Public Health. - : MDPI. - 1661-7827 .- 1660-4601. ; 17:21
-
Tidskriftsartikel (refereegranskat)abstract
- In recent decades, a considerable increase in the number of tick-bitten humans has been recorded in the north of European Russia. At the same time, significant climatic changes, such as an increase in air temperature, were noticed in this region. The northern border of the ixodidae distribution area lies in the north of European Russia, therefore the analysis of the population dynamics is of particular interest regarding the possible impact of the climate changes. Unfortunately, in such a large territory field, studies on tick abundance are very difficult. In our study, the official statistics for the number of tick-bitten humans were used. This kind of statistical analysis has been conducted in the Russian Federation for many years, and can be used for the estimation of climate change impact on tick abundance. Statistical data on tick-bitten humans have been collected in three large regions for several decades. For the same regions, the average annual air temperature was calculated and modeled. An S-shaped distribution of the number of victims depending on the average annual air temperature was established, which can be described as "Verhulst's law", or logistic function. However, the development of the population does not depend on time, but on the temperature of the ambient air.
|
|
| 2. |
- Bubnova, Olga, et al.
(författare)
-
Advantageous thermoelectric properties of a semimetallic polymer
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Thermoelectric generation potentially holds a solution for waste heat recovery issues provided that the availability of inexpensive, biodegradable and highly efficient thermoelectric materials is insured in the near future. Plastic thermoelectrics could successfully comply with the said requirements if the thermoelectric efficiency (ZT) of conducting polymers was higher. However, given the novelty of the subject, at present there are no clear guidelines for ZT optimization in this class of materials. The most important piece of information that is currently missing is the description of a specific electronic makeup that conducting polymers must possess in order to enable good thermoelectric performance. In the present study the thermoelectric properties of poly(3,4-ethylenedioxythiophene) derivatives with two types of counterions, i.e. poly(styrenesulfonate) (PSS) and tosylate (Tos) are evaluated. A striking variation in their thermoelectric performance is attributed to structural and morphological differences between two polymers that manifest itself in dissimilar charge transport mechanism. The superior properties of PEDOT-Tos presumably originate from a high degree of crystallinity and structural order that predetermines the tendency for bipolaron band formation. Unlike polaronic PEDOT-PSS with slowly varying density of localized states (DOS) near the Fermi level (EF), the DOS in PEDOT-Tos is characterized by higher asymmetry and higher charge carrier density at EF (similar to semimetals), which allows for higher thermopower and electrical conductivity. Therefore, we conclude that the polymers with semimetallic electronic makeup are expected to exhibit promising thermoelectric properties with bigger variation in thermopower upon doping.
|
|
| 3. |
- Bubnova, Olga, et al.
(författare)
-
Corrigendum: Semi-metallic polymers
- 2014
-
Ingår i: Nature Materials. - : Springer Science and Business Media LLC. - 1476-1122 .- 1476-4660. ; 13, s. 662-662
-
Tidskriftsartikel (refereegranskat)
|
|
| 4. |
- Bubnova, Olga, et al.
(författare)
-
Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)
- 2011
-
Ingår i: NATURE MATERIALS. - : Nature Publishing Group. - 1476-1122 .- 1476-4660. ; 10:6, s. 429-433
-
Tidskriftsartikel (refereegranskat)abstract
- Thermoelectric generators (TEGs) transform a heat flow into electricity. Thermoelectric materials are being investigated for electricity production from waste heat (co-generation) and natural heat sources. For temperatures below 200 degrees C, the best commercially available inorganic semiconductors are bismuth telluride (Bi2Te3)-based alloys, which possess a figure of merit ZT close to one(1). Most of the recently discovered thermoelectric materials with ZT andgt; 2 exhibit one common property, namely their low lattice thermal conductivities(2,3). Nevertheless, a high ZT value is not enough to create a viable technology platform for energy harvesting. To generate electricity from large volumes of warm fluids, heat exchangers must be functionalized with TEGs. This requires thermoelectric materials that are readily synthesized, air stable, environmentally friendly and solution processable to create patterns on large areas. Here we show that conducting polymers might be capable of meeting these demands. The accurate control of the oxidation level in poly(3,4-ethylenedioxythiophene) (PEDOT) combined with its low intrinsic thermal conductivity (lambda = D 0.37W m(-1) K-1) yields a ZT = 0.25 at room temperature that approaches the values required for efficient devices.
|
|
| 5. |
|
|
| 6. |
- Bubnova, Olga, et al.
(författare)
-
Semi-metallic polymers
- 2014
-
Ingår i: Nature Materials. - : Nature Publishing Group. - 1476-1122 .- 1476-4660. ; 13:2, s. 190-194
-
Tidskriftsartikel (refereegranskat)abstract
- Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies demonstrated that they can possess insulating, semiconducting or metallic properties; here we report that polymers can also be semi-metallic. Semi-metals, exemplified by bismuth, graphite and telluride alloys, have no energy bandgap and a very low density of states at the Fermi level. Furthermore, they typically have a higher Seebeck coefficient and lower thermal conductivities compared with metals, thus being suitable for thermoelectric applications. We measure the thermoelectric properties of various poly( 3,4-ethylenedioxythiophene) samples, and observe a marked increase in the Seebeck coefficient when the electrical conductivity is enhanced through molecular organization. This initiates the transition from a Fermi glass to a semi-metal. The high Seebeck value, the metallic conductivity at room temperature and the absence of unpaired electron spins makes polymer semi-metals attractive for thermoelectrics and spintronics.
|
|
| 7. |
- Bubnova, Olga
(författare)
-
Thermoelectric properties of conducting polymers
- 2013
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- According to different sources, from forty to sixty percent of the overall energy generated in the world today is squandered in waste heat. The existing energy conversion technologies are either close to their efficiency limits or too costly to justify their implementation. Therefore, the development of new technological approaches for waste heat recovery is highly demanded. The field of thermoelectrics can potentially provide an inexpensive, clean and efficient solution to waste heat underutilization, given that a new type of thermoelectric materials capable of meeting those requirements are available.This thesis reports on strategies to optimize a thermoelectric efficiency (ZT) of conducting polymers, more specifically poly(3,4-ethylenedioxythiophene) (Pedot). Conducting polymers constitute a special class of semiconductors characterized by low thermal conductivity as well as electrical conductivity and thermopower that can be readily modified by doping in order to achieve the best combination of thermoelectric parameters. Conducting polymers that have never previously been regarded as hypothetically compatible for thermoelectric energy conversion, can exhibit promising thermoelectric performance at moderate temperatures, which is a sought-after quality for waste heat recovery. A rather substandard thermoelectric efficiency of Pedot-Pss can be markedly improved by various secondary dopants whose addition usually improves polymer’s morphology accompanied by a drastic increase in electrical conductivity and, consequently, in ZT. In order to enable further enhancement in thermoelectric properties, the optimization of the charge carrier concentration is commonly used. The oxidation level of Pedot-Pss can be precisely controlled by electrochemical doping resulting in a tenfold increase of ZT. In contrast to Pedot-Pss, another conducting polymer Pedot-Tos exhibits superior thermoelectric performance even without secondary doping owning to its partially crystalline nature that allows for an improved electronic conduction. With the aid of a strong electron donor, positively doped Pedot-Tos gets partially reduced reaching the optimum oxidation state at which its thermoelectric efficiency is just four times smaller than that of Be2Te3 and the highest among all stable conducting polymers. The downsides associated with chemical doping of Pedot-Tos such as doping inhomogeneity or chemical dopants air sensitivity can be surmounted if the doping level of Pedot-Tos is controlled by acidity/basicity of the polymer. This approach yields similar maximum thermoelectric efficiency but does not necessitate inert conditions for sample preparation. Optimized Pedot-Tos/Pedot-Pss can be functionalized as a p-type material in organic thermogenerators (OTEG) to power low energy electronic devices. If printed on large areas, OTEGs could be used as an alternative technique for capturing heat discarded by industrial processes, households, transportation sector or any natural heat sources for electricity production.
|
|
| 8. |
- Bubnova, Olga, et al.
(författare)
-
Towards polymer-based organic thermoelectric generators
- 2012
-
Ingår i: Energy & Environmental Science. - : Royal Society of Chemistry. - 1754-5692 .- 1754-5706. ; 5:11, s. 9345-9362
-
Tidskriftsartikel (refereegranskat)abstract
- In response to the thread of environmental and ecological degradation along with projected fossil fuel depletion the active search for efficient renewable energy conversion technologies has been attempted in various research areas including the field of thermoelectrics. Despite the availability of considerable amounts of waste and natural heat stored in warm fluids (andlt;250 degrees C) a lack of environmentally friendly materials with high natural abundance, low manufacturing cost and high thermoelectric efficiency impedes the widespread use of thermoelectric generators for energy harvesting on a large scale. In this perspective, we examine the possibility of using organic conducting polymers in thermoelectric applications. We provide an overview of the background and the key concepts of organic thermoelectrics and illustrate some of the first prototypes of polymer-based organic thermoelectric generators.
|
|
| 9. |
- Bubnova, Olga, et al.
(författare)
-
Tuning the Thermoelectric Properties of Conducting Polymers in an Electrochemical Transistor
- 2012
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society. - 0002-7863 .- 1520-5126. ; 134:40, s. 16456-16459
-
Tidskriftsartikel (refereegranskat)abstract
- While organic field-effect transistors allow the investigation of interfacial charge transport at the semiconductor-dielectric interface, an electrochemical transistor truly modifies the oxidation level and conductivity throughout the bulk of an organic semiconductor. In this work, the thermoelectric properties of the bulk of the conducting polymer poly(3,4-ethylenedioxythiophene) -poly(styrene sulfonate) were controlled electrically by varying the gate voltage. In light of the growing interest in conducting polymers as thermoelectric generators, this method provides an easy tool to study the physics behind the thermoelectric properties and to optimize polymer thermoelectrics.
|
|
| 10. |
- Ullah Khan, Zia, et al.
(författare)
-
Acido-basic control of the thermoelectric properties of poly(3,4-ethylenedioxythiophene)tosylate (PEDOT-Tos) thin films
- 2015
-
Ingår i: Journal of Materials Chemistry C. - : Royal Society of Chemistry. - 2050-7526 .- 2050-7534. ; 3, s. 10616-10623
-
Tidskriftsartikel (refereegranskat)abstract
- PEDOT-Tos is one of the conducting polymers that displays the most promising thermoelectric properties. Until now, it has been utterly difficult to control all the synthesis parameters and the morphology governing the thermoelectric properties. To improve our understanding of this material, we study the variation in the thermoelectric properties by a simple acido-basic treatment. The emphasis of this study is to elucidate the chemical changes induced by acid (HCl) or base (NaOH) treatment in PEDOT-Tos thin films using various spectroscopic and structural techniques. We could identify changes in the nanoscale morphology due to anion exchange between tosylate and Cl- or OH-. But, we identified that changing the pH leads to a tuning of the oxidation level of the polymer, which can explain the changes in thermoelectric properties. Hence, a simple acid-base treatment allows finding the optimum for the power factor in PEDOT-Tos thin films.
|
|
