| 1. |
- Carboni, Marco, et al.
(författare)
-
Analysis of the Solid Electrolyte Interphase on Hard Carbon Electrodes in Sodium-Ion Batteries
- 2019
-
Ingår i: ChemElectroChem. - : Wiley. - 2196-0216. ; 6:6, s. 1745-1753
-
Tidskriftsartikel (refereegranskat)abstract
- The composition, morphology, and evolution of the solid electrolyte interphase (SEI) formed on hard carbon (HC) electrodes upon cycling in sodium‐ion batteries are investigated. A microporous HC was prepared by pyrolysis of d‐(+)‐glucose at 1000 °C followed by ball‐milling. HC electrodes were galvanostatically cycled at room temperature in sodium‐ion half‐cells using an aprotic electrolyte of 1 m sodium bis(trifluoromethanesulfonyl)imide dissolved in propylene carbonate with 3 wt % fluoroethylene carbonate additive. The evolution of the electrode/electrolyte interface was studied by impedance spectroscopy upon cycling and ex situ by spectroscopy and microscopy. The irreversible capacity displayed by the HC electrodes in the first galvanostatic cycle is probably due to the accumulation of redox inactive NaxC phases and the precipitation of a porous, organic‐inorganic hybrid SEI layer over the HC electrodes. This passivation film further evolves in morphology and composition upon cycling and stabilizes after approximately ten galvanostatic cycles at low current rates.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Carboni, Marco, et al.
(författare)
-
Unlocking high capacities of graphite anodes for potassium-ion batteries
- 2019
-
Ingår i: RSC Advances. - : ROYAL SOC CHEMISTRY. - 2046-2069. ; 9:36, s. 21070-21074
-
Tidskriftsartikel (refereegranskat)abstract
- Graphite is considered a promising candidate as the anode for potassium-ion batteries (KIBs). Here, we demonstrate a significant improvement in performance through the ball-milling of graphite. Electrochemical techniques show reversible K-intercalation into graphitic layers, with 65% capacity retention after 100 cycles from initial capacities and extended cycling beyond 200 cycles. Such an affinity of the graphite towards storage of K-ions is explained by means of SEM and Raman analyses. Graphite ball-milling results in a gentle mechanical exfoliation of the graphene layers and simultaneous defect formation, leading to enhanced electrochemical performance.
|
|
| 5. |
- Ebadi, Mahsa, et al.
(författare)
-
Insights into the Li-Metal/Organic Carbonate Interfacial Chemistry by Combined First-Principles Theory and X-ray Photoelectron Spectroscopy
- 2019
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 123:1, s. 347-355
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray photoelectron spectroscopy (XPS) is a widely used technique to study surfaces and interfaces. In complex chemical systems, however, interpretation of the XPS results and peak assignments is not straightforward. This is not least true for Li-batteries, where XPS yet remains a standard technique for interface characterization. In this work, a combined density functional theory (DFT) and experimental XPS study is carried out to obtain the C 1s and O 1s core-level binding energies of organic carbonate molecules on the surface of Li metal. Decomposition of organic carbonates is frequently encountered in electrochemical cells employing this electrode, contributing to the build up of a complex solid electrolyte interphase (SEI). The goal in this current study is to identify the XPS fingerprints of the formed compounds, degradation pathways, and thereby the early formation stages of the SEI. The contribution of partial atomic charges on the core-ionized atoms and the electrostatic potential due to the surrounding atoms on the core-level binding energies, which is decisive for interpretation of the XPS spectra, are addressed based on the DFT calculations. The results display strong correlations between these two terms and the binding energies, whereas electrostatic potential is found to be the dominating factor. The organic carbonate molecules, decomposed at the surface of the Li metal, are considered based on two different decomposition pathways. The trends of calculated binding energies for products from ethereal carbon-ethereal oxygen bond cleavage in the organic carbonates are better supported when compared to the experimental XPS results.
|
|
| 6. |
- Etman, Ahmed S., et al.
(författare)
-
Acetonitrile-Based Electrolytes for Rechargeable Zinc Batteries
- 2020
-
Ingår i: Energy technology. - : Wiley. - 2194-4288 .- 2194-4296. ; 8:9
-
Tidskriftsartikel (refereegranskat)abstract
- Herein, Zn plating-stripping onto metallic Zn using a couple of acetonitrile (AN)-based electrolytes (0.5 mZn(TFSI)(2)/AN and 0.5 mZn(CF3SO3)(2)/AN) is studied. Both electrolytes show a reversible Zn plating/stripping over 1000 cycles at different applied current densities varying from 1.25 to 10 mA cm(-2). The overpotentials of Zn plating-stripping over 500 cycles at constant current of 1.25 and 10 mA cm(-2)are +/- 0.05 and +/- 0.2 V, respectively. X-ray photoelectron spectroscopy analysis reveals that no decomposition product is formed on the Zn surface. The anodic stability of four different current collectors of aluminum foil (Al), carbon-coated aluminum foil (C/Al), TiN-coated titanium foil (TiN/Ti), and multiwalled carbon nanotube paper (MWCNT-paper) is tested in both electrolytes. As a general trend, the current collectors have a higher anodic stability in Zn(TFSI)(2)/AN compared with Zn(CF3SO3)(2)/AN. The Al foil displays the highest anodic stability of approximate to 2.25 V versus Zn2+/Zn in Zn(TFSI)(2)/AN electrolyte. The TiN/Ti shows a comparable anodic stability with that of Al foil, but its anodic current density is higher than Al. The promising reversibility of the Zn plating/stripping combined with the anodic stability of Al and TiN/Ti current collectors paves the way for establishing highly reversible Zn-ion batteries.
|
|
| 7. |
- Graco-Roza, Caio, et al.
(författare)
-
Distance decay 2.0 – A global synthesis of taxonomic and functional turnover in ecological communities
- 2022
-
Ingår i: Global Ecology and Biogeography. - : Wiley. - 1466-822X .- 1466-8238. ; 31:7, s. 1399-1421
-
Tidskriftsartikel (refereegranskat)abstract
- Aim: Understanding the variation in community composition and species abundances (i.e., beta-diversity) is at the heart of community ecology. A common approach to examine beta-diversity is to evaluate directional variation in community composition by measuring the decay in the similarity among pairs of communities along spatial or environmental distance. We provide the first global synthesis of taxonomic and functional distance decay along spatial and environmental distance by analysing 148 datasets comprising different types of organisms and environments.Location: Global.Time period: 1990 to present.Major taxa studied: From diatoms to mammals.Method: We measured the strength of the decay using ranked Mantel tests (Mantel r) and the rate of distance decay as the slope of an exponential fit using generalized linear models. We used null models to test whether functional similarity decays faster or slower than expected given the taxonomic decay along the spatial and environmental distance. We also unveiled the factors driving the rate of decay across the datasets, including latitude, spatial extent, realm and organismal features.Results: Taxonomic distance decay was stronger than functional distance decay along both spatial and environmental distance. Functional distance decay was random given the taxonomic distance decay. The rate of taxonomic and functional spatial distance decay was fastest in the datasets from mid-latitudes. Overall, datasets covering larger spatial extents showed a lower rate of decay along spatial distance but a higher rate of decay along environmental distance. Marine ecosystems had the slowest rate of decay along environmental distances.Main conclusions: In general, taxonomic distance decay is a useful tool for biogeographical research because it reflects dispersal-related factors in addition to species responses to climatic and environmental variables. Moreover, functional distance decay might be a cost-effective option for investigating community changes in heterogeneous environments.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Liu, Chenjuan, 1988-, et al.
(författare)
-
On the Stability of NaO2 in Na–O2 Batteries
- 2018
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 10:16, s. 13534-13541
-
Tidskriftsartikel (refereegranskat)abstract
- Na–O2 batteries are regarded as promising candidates for energy storage. They have higher energy efficiency, rate capability, and chemical reversibility than Li–O2 batteries; in addition, sodium is cheaper and more abundant compared to lithium. However, inconsistent observations and instability of discharge products have inhibited the understanding of the working mechanism of this technology. In this work, we have investigated a number of factors that influence the stability of the discharge products. By means of in operando powder X-ray diffraction study, the influence of oxygen, sodium anode, salt, solvent, and carbon cathode were investigated. The Na metal anode and an ether-based solvent are the main factors that lead to the instability and decomposition of NaO2 in the cell environment. This fundamental insight brings new information on the working mechanism of Na–O2 batteries.
|
|
