| 1. |
- Ajuria, Jon, et al.
(författare)
-
Graphene-based lithium ion capacitor with high gravimetric energy and power densities
- 2017
-
Ingår i: Journal of Power Sources. - : Elsevier. - 0378-7753 .- 1873-2755. ; 363, s. 422-427
-
Tidskriftsartikel (refereegranskat)abstract
- Hybrid capacitor configurations are now of increasing interest to overcome the current energy limitations of supercapacitors. In this work, we report a lithium ion capacitor (LIC) entirely based on graphene. On the one hand, the negative-battery-type- electrode consists of a self-standing, binder-free 3D macroporous foam formed by reduced graphene oxide and decorated with tin oxide nanoparticles (SnO2-rGO). On the other hand, the positive-capacitor-type- electrode is based on a thermally expanded and physically activated reduced graphene oxide (a-TEGO). For comparison purposes, a symmetric electrical double layer capacitor (EDLC) using the same activated graphene in 1.5 M Et4NBE4/ACN electrolyte is also assembled. Built in 1 M LiPF6 EC:DMC, the graphene-based LIC shows an outstanding, 10-fold increase in energy density with respect to its EDLC counterpart at low discharge rates (up to 200 Wh kg(-1)). Furthermore, it is still capable to deliver double the energy in the high power region, within a discharge time of few seconds.
|
|
| 2. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 3. |
- Boulanger, Nicolas, et al.
(författare)
-
Spray deposition of supercapacitor electrodes using environmentally friendly aqueous activated graphene and activated carbon dispersions for industrial implementation
- 2021
-
Ingår i: ChemElectroChem. - : John Wiley & Sons. - 2196-0216. ; 8:7, s. 1349-1361
-
Tidskriftsartikel (refereegranskat)abstract
- A spray gun machine was used to deposit high‐surface‐area supercapacitor electrodes using green non‐toxic aqueous dispersions based on different kinds of high specific surface area nanostructured carbon materials: activated graphene (a‐rGO) and activated carbon (AC). Tuning the spray conditions and dispersion formulation allowed us to achieve good adhesion to stainless‐steel current collectors in combination with high surface area and a satisfactory mechanical stability of the electrodes. The specific surface area of approximately 2000 m2/g was measured directly on a‐rGO and AC electrodes showing only around a 20 % decrease compared to the precursor powder materials. The performance of the electrodes deposited on stainless‐steel and aluminum current collectors was tested in supercapacitor devices using three electrolytes. The electrodes were tested in an “as‐deposited” state and after post‐deposition annealing at 200 °C. The spray deposition method and post‐deposition annealing are completely compatible with roll‐to‐roll industrial production methods. The a‐rGO demonstrated superior performance compared to AC in supercapacitor electrodes with gravimetric capacitance, energy, and power density parameters, which exceed commercially available analogues. The formulation of the dispersions used in this study is environmentally friendly, as it is based on only on water as a solvent and commercially available non‐toxic additives (graphene oxide, fumed silica, and carbon nanotubes).
|
|
| 4. |
- Bousquet, Jean, et al.
(författare)
-
Allergic Rhinitis and its Impact on Asthma (ARIA) Phase 4 (2018) : Change management in allergic rhinitis and asthma multimorbidity using mobile technology
- 2019
-
Ingår i: Journal of Allergy and Clinical Immunology. - : Elsevier. - 0091-6749 .- 1097-6825. ; 143:3, s. 864-879
-
Tidskriftsartikel (refereegranskat)abstract
- Allergic Rhinitis and its Impact on Asthma (ARIA) has evolved from a guideline by using the best approach to integrated care pathways using mobile technology in patients with allergic rhinitis (AR) and asthma multimorbidity. The proposed next phase of ARIA is change management, with the aim of providing an active and healthy life to patients with rhinitis and to those with asthma multimorbidity across the lifecycle irrespective of their sex or socioeconomic status to reduce health and social inequities incurred by the disease. ARIA has followed the 8-step model of Kotter to assess and implement the effect of rhinitis on asthma multimorbidity and to propose multimorbid guidelines. A second change management strategy is proposed by ARIA Phase 4 to increase self-medication and shared decision making in rhinitis and asthma multimorbidity. An innovation of ARIA has been the development and validation of information technology evidence-based tools (Mobile Airways Sentinel Network [MASK]) that can inform patient decisions on the basis of a self-care plan proposed by the health care professional.
|
|
| 5. |
- Bousquet, Jean, et al.
(författare)
-
ARIA digital anamorphosis : Digital transformation of health and care in airway diseases from research to practice
- 2021
-
Ingår i: Allergy. European Journal of Allergy and Clinical Immunology. - : John Wiley & Sons. - 0105-4538 .- 1398-9995. ; 76:1, s. 168-190
-
Forskningsöversikt (refereegranskat)abstract
- Digital anamorphosis is used to define a distorted image of health and care that may be viewed correctly using digital tools and strategies. MASK digital anamorphosis represents the process used by MASK to develop the digital transformation of health and care in rhinitis. It strengthens the ARIA change management strategy in the prevention and management of airway disease. The MASK strategy is based on validated digital tools. Using the MASK digital tool and the CARAT online enhanced clinical framework, solutions for practical steps of digital enhancement of care are proposed.
|
|
| 6. |
- Bousquet, J. Jean, et al.
(författare)
-
Next-generation ARIA care pathways for rhinitis and asthma : a model for multimorbid chronic diseases
- 2019
-
Ingår i: Clinical and Translational Allergy. - : BMC. - 2045-7022. ; 9
-
Forskningsöversikt (refereegranskat)abstract
- Background: In all societies, the burden and cost of allergic and chronic respiratory diseases are increasing rapidly. Most economies are struggling to deliver modern health care effectively. There is a need to support the transformation of the health care system into integrated care with organizational health literacy.Main body: As an example for chronic disease care, MASK (Mobile Airways Sentinel NetworK), a new project of the ARIA (Allergic Rhinitis and its Impact on Asthma) initiative, and POLLAR (Impact of Air POLLution on Asthma and Rhinitis, EIT Health), in collaboration with professional and patient organizations in the field of allergy and airway diseases, are proposing real-life ICPs centred around the patient with rhinitis, and using mHealth to monitor environmental exposure. Three aspects of care pathways are being developed: (i) Patient participation, health literacy and self-care through technology-assisted "patient activation", (ii) Implementation of care pathways by pharmacists and (iii) Next-generation guidelines assessing the recommendations of GRADE guidelines in rhinitis and asthma using real-world evidence (RWE) obtained through mobile technology. The EU and global political agendas are of great importance in supporting the digital transformation of health and care, and MASK has been recognized by DG Sante as a Good Practice in the field of digitally-enabled, integrated, person-centred care.Conclusion: In 20 years, ARIA has considerably evolved from the first multimorbidity guideline in respiratory diseases to the digital transformation of health and care with a strong political involvement.
|
|
| 7. |
- Menditto, Enrica, et al.
(författare)
-
Adherence to treatment in allergic rhinitis using mobile technology : The MASK Study
- 2019
-
Ingår i: Clinical and Experimental Allergy. - : WILEY. - 0954-7894 .- 1365-2222. ; 49:4, s. 442-460
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Mobile technology may help to better understand the adherence to treatment. MASK-rhinitis (Mobile Airways Sentinel NetworK for allergic rhinitis) is a patient-centred ICT system. A mobile phone app (the Allergy Diary) central to MASK is available in 22 countries. Objectives: To assess the adherence to treatment in allergic rhinitis patients using the Allergy Diary App. Methods: An observational cross-sectional study was carried out on all users who filled in the Allergy Diary from 1 January 2016 to 1 August 2017. Secondary adherence was assessed by using the modified Medication Possession Ratio (MPR) and the Proportion of days covered (PDC) approach. Results: A total of 12143 users were registered. A total of 6949 users reported at least one VAS data recording. Among them, 1887 users reported >= 7 VAS data. About 1195 subjects were included in the analysis of adherence. One hundred and thirty-six (11.28%) users were adherent (MPR >= 70% and PDC <= 1.25), 51 (4.23%) were partly adherent (MPR >= 70% and PDC = 1.50) and 176 (14.60%) were switchers. On the other hand, 832 (69.05%) users were non-adherent to medications (MPR <70%). Of those, the largest group was non-adherent to medications and the time interval was increased in 442 (36.68%) users. Conclusion and clinical relevance: Adherence to treatment is low. The relative efficacy of continuous vs on-demand treatment for allergic rhinitis symptoms is still a matter of debate. This study shows an approach for measuring retrospective adherence based on a mobile app. This also represents a novel approach for analysing medication-taking behaviour in a real-world setting.
|
|
| 8. |
- Moreno-Fernández, Gelines, et al.
(författare)
-
Ball-milling-enhanced capacitive charge storage of activated graphene in aqueous, organic and ionic liquid electrolytes
- 2021
-
Ingår i: Electrochimica Acta. - : Elsevier. - 0013-4686 .- 1873-3859. ; 370
-
Tidskriftsartikel (refereegranskat)abstract
- Ball-milling under either air or argon is explored as a facile way to adjust the textural properties, surface chemistry and morphology of activated reduced graphene oxide to the requirements for optimum electrode materials in electrical double layer capacitors operating in aqueous (KOH), organic (tetraethylammonium tetrafluoroborate in acetonitrile) and ionic liquid (1-Ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) electrolytes. Ball-milling is evidenced to specifically remove excessively large pores through the collapse of mesoporosity with no negative effect on in-pore resistance in any electrolyte, a concomitant improvement in volume-based storage and no loss of gravimetric performance. Ball-milling under air results in high oxygen content in the materials, which brings about performance deterioration in tetraethylammonium tetrafluoroborate in acetonitrile, but not significantly in aqueous and ionic liquid electrolytes. The best performance is achieved using activated graphene ball-milling under argon, with a volumetric capacitance of 90, 60, 70 F.cm−3 and a characteristic cell response time of 0.28, 1.3 and 8 s for aqueous, organic and ionic liquid electrolyte. While the highest energy density of 25 Wh.L−1 is reached in ionic liquid electrolyte at a cell potential of 3 V, the highest practical power density of 15 kW.L−1 is measured in tetraethylammonium tetrafluoroborate in acetonitrile at the energy density of 10 Wh.L−1. Our study underscores that simple ball-milling can provide the best trade-off among multiple performance parameters, resulting in sufficiently high volumetric capacitance with no detriment in high-rate response and cycle stability.
|
|
| 9. |
- Quesnel, Etienne, et al.
(författare)
-
Graphene-based technologies for energy applications, challenges and perspectives
- 2015
-
Ingår i: Current Opinion in Chemical Engineering. - : IOP Publishing. - 2211-3398. ; 2:3, s. 1-16
-
Tidskriftsartikel (refereegranskat)abstract
- Here we report on technology developments implemented into the Graphene Flagship European project for the integration of graphene and graphene-related materials (GRMs) into energy application devices. Many of the technologies investigated so far aim at producing composite materials associating graphene or GRMs with either metal or semiconducting nanocrystals or other carbon nanostructures (e.g., CNT, graphite). These composites can be used favourably as hydrogen storage materials or solar cell absorbers. They can also provide better performing electrodes for fuel cells, batteries, or supercapacitors. For photovoltaic (PV) electrodes, where thin layers and interface engineering are required, surface technologies are preferred. We are using conventional vacuum processes to integrate graphene as well as radically new approaches based on laser irradiation strategies. For each application, the potential of implemented technologies is then presented on the basis of selected experimental and modelling results. It is shown in particular how some of these technologies can maximize the benefit taken from GRM integration. The technical challenges still to be addressed are highlighted and perspectives derived from the running works emphasized.
|
|
