| 1. |
|
|
| 2. |
- Blanco, A., et al.
(författare)
-
Performance of timing resistive plate chambers with relativistic neutrons from 300 to 1500 MeV
- 2015
-
Ingår i: Journal of Instrumentation. - : IOP Publishing. - 1748-0221. ; 10:2
-
Tidskriftsartikel (refereegranskat)abstract
- A prototype composed of four resistive plate chamber layers has been exposed to quasi-monoenergetic neutrons produced from a deuteron beam of varying energy (300 to 1500 AMeV) in experiment S406 at GSI, Darmstad, Germany. Each layer, with an active area of about 2000 × 500 mm2, is made of modules containing the active gaps, all in multigap construction. Each gap is defined by 0.3 mm nylon mono-filaments positioned between 2.85 mm thick float glass electrodes. The modules are operated in avalanche mode with a non-flammable gas mixture composed of 90% C2H2F4 and 10% SF6. The signals are readout by a pick-up electrode formed by 15 copper strips (per layer), spaced at a pitch of 30 mm, connected at both sides to timing front end electronics. Measurements of the time of flight jitter of neutrons, in the mentioned energy range, point to a contribution of the resistive plate chamber in the order of 150 ps, independent of the neutron energy.
|
|
| 3. |
- Machado, J., et al.
(författare)
-
Performance of timing Resistive Plate Chambers with protons from 200 to 800 MeV
- 2015
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 10:1, s. C01043-
-
Tidskriftsartikel (refereegranskat)abstract
- A prototype composed of four resistive plate chamber layers has been exposed to quasi-monoenergetic protons produced from a deuteron beam of varying energy (200 to 800 AMeV) in experiment S406 at GSI, Darmstadt, Germany. The aim of the experiment is to characterize the response of the prototype to protons in this energy range, which deposit from 1.75 to 6 times more energy than minimum ionizing particles. Each layer, with an active area of about 2000 × 500 mm 2 , is made of modules containing the active gaps, all in multigap construction. Each gap is defined by 0.3 mm nylon mono-filaments positioned between 2.85 mm thick float glass electrodes. The modules are operated in avalanche mode with a non-flammable gas mixture composed of 90% C 2 H 2 F 4 and 10% SF 6 . The signals are readout by a pick-up electrode formed by 15 copper strips (per layer), spaced at a pitch of 30 mm, connected at both sides to timing front end electronics. Results show an uniform efficiency close to 100% along with a timing resolution of around 60 ps on the entire 2000 × 500 mm 2 area.
|
|
| 4. |
- Petri, M., et al.
(författare)
-
Structure of C-16: Testing shell model and ab initio approaches
- 2012
-
Ingår i: Physical Review C - Nuclear Physics. - 2469-9985 .- 2469-9993. ; 86:4, s. Art. no. 044329-
-
Tidskriftsartikel (refereegranskat)abstract
- Excited states in C-16 were populated via the Be-9(N-17,C-16+gamma)X one-proton knockout reaction. The lifetime of the 2(1)(+) state in C-16 was measured using the recoil distance method. The extracted lifetime of tau(+)(21) = 11.4(-0.9)(+0.8)(stat) +/- 0.7(syst(B rho))(-1.5)(+0.0)(syst(feeding)) ps yields a deduced B(E2;2(1)(+) -> 0(1)(+)) = 4.21(-0.26)(+0.34)(stat)(-0.24)(+0.28)(syst(B rho))(-0.00)(+0.64)(syst(feeding)) e(2)fm(4) value in good agreement with a previous measurement. The one-proton knockout cross section is used to extract the proton amplitude of the C-16 2(1)(+) state, which confirms the neutron dominant character of this state. Gamma-ray branching ratios between the 2(2)(+) state and the 2(1)(+) and ground states were also determined. The results are compared with p-sd shell model and no-core shell model (with NN and NN + NNN) calculations. The inclusion of three-body forces are essential in order for the no-core shell model calculations to reproduce the experimental findings on the gamma-ray branching ratios.
|
|
