| 1. |
- Ameen, Arman, 1976-, et al.
(författare)
-
Energy saving, indoor thermal comfort and indoor air quality evaluation of an office environment using corner impinging jet ventilation
- 2023
-
Ingår i: Developments in the Built Environment. - : Elsevier. - 2666-1659. ; 15
-
Tidskriftsartikel (refereegranskat)abstract
- The performance of a corner based impinging jet ventilation system (CIJV) in an office environment was evaluated numerically. The evaluation was done both in terms of the local thermal comfort and the local indoor air quality. Three different inlet configurations were tested for a range of outdoor temperatures that included both winter and summer conditions. In terms of indoor air quality, the results showed that CIJV performed better than a traditional mixing system. The study also revealed that CIJV creates a stronger temperature stratification in summertime compared to wintertime. When evaluating the energy saving potential the results showed a possible reduction of 7% for the ventilation flowrate when the outdoor temperatures were between -15 °C and -5 °C, 8 % when the outdoor temperatures were between 0 °C and 10 °C and 9 % when the outdoor temperatures were between 15 °C and 25 °C.
|
|
| 2. |
- Ameen, Arman, 1976-
(författare)
-
Experimental and numerical study of corner impinging jet ventilation for an office environment
- 2024
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- An effective ventilation system is an important component of a building’s service infrastructure. It serves the dual purpose of creating a comfortable and healthy indoor environment for occupants, thereby enhancing their well-being and productivity. However, the ventilation system is also a part of the building that uses a high amount of energy.The main objective of this study is to evaluate a novel implementation of the impinging jet ventilation system by placing the supply inlet at the corners of the space or room, rather than in the traditional mid-wall section. The focus of this study is to test and evaluate corner impinging jet ventilation in a medium-sized office environment within a building that requires moderate amount of heating and cooling.In the first part of this study (summer condition), the system is evaluated in an experimental environment, where it is compared against other systems such as displacement ventilation and mixing ventilation. The evaluated parameters indicates that corner impinging ventilation system performs better than mixing ventilation but show similar results to displacement ventilation in terms of airchange effectiveness. This experimental setup was also tested in winter condition and the results showed that the system was most effective during summertime compared to wintertime. In wintertime the results for the air change effectiveness were similar to those of a mixing system.In the second part, numerical simulations were utilized to delve deeper into the behaviour of the corner impinging jet ventilation system close to the floor surface. A numerical model was created and validated against experimental measurements. In this part, the spreading of the air jet across the room floor was examined, and its relation to various parameters such as inlet velocity, inlet shape and discharge height. Results indicated that diffuser geometries have almost no impact on velocity profile along the floor's centreline, jet spreading rate and maximum velocity decay. The results also showed a high degree of flexibility for the room size, between 25-100 m2 for which the results were applicable. The results also concluded that there was a noticeable confinement effect present and that the jet was able to travel far into the room.In the third part numerical simulations was used for validating and to create a model for an office room containing two office workstations. The office room was evaluated in terms of local thermal comfort, close to the sitting area. In addition, the indoor air quality was also examined. The results showed that corner impinging ventilation system performed better than conventional mixing ventilation system, especially when evaluating the indoor air quality in terms of mean age of air. This evaluation also took into account both outdoor summer and winter conditions, as well as different inlet surface areas. Different locations for the workstations were also evaluated with good results, except for placing the work-stations close to the inlets. Due to the system’s effectiveness of providing fresh air to the occupants, further analysis was made to try and reduce the air flowrate but keep the same indoor air quality level as an equivalent fully mixing ventilation system. By using this method, the study was able to demonstrate reduction in the energy use by reducing the air flowrate of the supply inlet. The study showed a possible reduction of the energy use by 7-9 % for outdoor temperatures ranging between -15 °C to 25 °C.
|
|
| 3. |
- Ameen, Arman, 1976-, et al.
(författare)
-
Experimental Evaluation of the Ventilation Effectiveness of Corner Stratum Ventilation in an Office Environment
- 2019
-
Ingår i: Buildings. - : MDPI. - 2075-5309. ; 9:7
-
Tidskriftsartikel (refereegranskat)abstract
- An experimental study was conducted in a room resembling an office in a laboratory environment. The study involved investigating the ability of corner-placed stratum ventilation in order to evaluate the ventilation’s effectiveness and local thermal comfort. At fixed positions, the air temperature, air velocity, turbulence intensity, and tracer gas decay measurements were carried out. The results show that corner-placed stratum ventilation behaves very similar to a mixing ventilation system when considering air change effectiveness. The performance of the system was better at lower supply air flow rates for heat removal effectiveness. For the heating cases, the draught rates were all very low, with the maximum measured value of 12%. However, for the cooling cases, the maximum draught rate was 20% and occurred at ankle level in the middle of the room.
|
|
| 4. |
- Ameen, Arman, 1976-, et al.
(författare)
-
Experimental Investigation of Ventilation Performance of Different Air Distribution Systems in an Office Environment : Heating Mode
- 2019
-
Ingår i: Energies. - : MDPI AG. - 1996-1073. ; 12:10
-
Tidskriftsartikel (refereegranskat)abstract
- A vital requirement for all-air ventilation systems are their functionality to operate both in cooling and heating mode. This article experimentally investigates two newly designed air distribution systems, corner impinging jet (CIJV) and hybrid displacement ventilation (HDV) in comparison against a mixing type air distribution system. These three different systems are examined and compared to one another to evaluate their performance based on local thermal comfort and ventilation effectiveness when operating in heating mode. The evaluated test room is an office environment with two workstations. One of the office walls, which has three windows, faces a cold climate chamber. The results show that CIJV and HDV perform similar to a mixing ventilation in terms of ventilation effectiveness close to the workstations. As for local thermal comfort evaluation, the results show a small advantage for CIJV in the occupied zone. Comparing C2-CIJV to C2-CMV the average draught rate (DR) in the occupied zone is 0.3% for C2-CIJV and 5.3% for C2-CMV with the highest difference reaching as high as 10% at the height of 1.7 m. The results indicate that these systems can perform as well as mixing ventilation when used in offices that require moderate heating. The results also show that downdraught from the windows greatly impacts on the overall airflow and temperature pattern in the room.
|
|
| 5. |
- Ameen, Arman, et al.
(författare)
-
Experimental investigation of ventilation performance of different air distribution systems in an office environment – cooling mode
- 2019
-
Ingår i: Energies. - : MDPI. - 1996-1073. ; 12:7
-
Tidskriftsartikel (refereegranskat)abstract
- The performance of a newly designed corner impinging jet air distribution method with an equilateral triangle cross section was evaluated experimentally and compared to that of two more traditional methods (mixing and displacement ventilation). At nine evenly chosen positions with four standard vertical points, air velocity, turbulence intensity, temperature, and tracer gas decay measurements were conducted for all systems. The results show that the new method behaves as a displacement ventilation system, with high air change effectiveness and stratified flow pattern and temperature field. Both local air change effectiveness and air exchange effectiveness of the corner impinging jet showed high quality and promising results, which is a good indicator of ventilation effectiveness. The results also indicate that there is a possibility to slightly lower the airflow rates for the new air distribution system, while still meeting the requirements for thermal comfort and indoor air quality, thereby reducing fan energy usage. The draught rate was also lower for corner impinging jet compared to the other tested air distribution methods. The findings of this research show that the corner impinging jet method can be used for office ventilation.
|
|
| 6. |
- Ameen, Arman, 1976-, et al.
(författare)
-
Numerical investigation of indoor thermal comfort and air quality for an office equipped with corner impinging jet ventilation
- 2023
-
Ingår i: Advances in Building Energy Research. - : Taylor & Francis. - 1751-2549 .- 1756-2201. ; 17:5, s. 578-604
-
Tidskriftsartikel (refereegranskat)abstract
- This study investigates the feasibility of using only corner impinging jet ventilation (CIJV) for heating and cooling a medium-sized office space with two occupants while maintaining adequate indoor thermal comfort and air quality compared to traditional mixing ventilation systems. This study examines what impact various outdoor temperatures, ranging from −15°C to 25°C, have on an office environment in terms of indoor thermal comfort and air quality. Three different workspace positions were evaluated. The results show that the CIJV system meets the ASHRAE thermal comfort standards for all three positions. In terms of indoor air quality, CIJV performs better than traditional mixing systems, with improved mean age of air and ACE values. This study concludes that CIJV can be used both close and far away from the supply inlets and still provide adequate indoor thermal comfort and air quality during both cooling and heating season.
|
|
| 7. |
- Ameen, Arman, 1976-, et al.
(författare)
-
Numerical investigation of the flow behavior of an isothermal corner impinging jet for building ventilation
- 2022
-
Ingår i: Building and Environment. - : Elsevier. - 0360-1323 .- 1873-684X. ; 223
-
Tidskriftsartikel (refereegranskat)abstract
- The corner impinging jet concept has been proposed as a new air distribution system for use in office environments. The present paper reports the mean flow field behavior of an isothermal corner-based turbulent impinging jet in a room. A detailed experimental study is carried out to validate the numerical simulations, and the predictions are performed using three turbulence models. RNG k−ε model was chosen for this study. This study investigates the influence different configuration parameters such as jet discharge height, diffuser geometry (shape and size) and supply airflow rate have on the flow field. The results show that the diffuser geometries used in this study had in general a minor effect on the velocity developments along the centerline of the floor, maximum velocity decay and jet spreading rate except for some specific cases. When evaluating the triangle geometry cases, the results show that all the cases with volume flow <20 L/s are able to meet Boverket's building regulations velocity requirement both for summer and winter. The applicability evaluation show that the results can be considered for room sizes between ≈25 and 100 m2. In addition, the wall confinement effect (90° vs. 180°) is having a significant impact on the maximum velocity decay for corner impinging jet ventilation. In the regression analysis the results shows that the distance along the diagonal centerline of the room has the most impact on the evaluation of maximum velocity decay and jet spreading rate.
|
|
| 8. |
- Ameen, Arman, et al.
(författare)
-
Reducing energy usage in multi-family housing
- 2019
-
Ingår i: 2019 9th International Conference on Future Environment and Energy 9–11 January 2019, Osaka, Japan. - : Institute of Physics Publishing (IOPP).
-
Konferensbidrag (refereegranskat)abstract
- The energy usage in residential sector have been around 22% of the total energy use in the world and increasing due to the population growth and higher living standards. The energy sources for this are made up primarily of non-renewable energy resources which generates a large amount of global greenhouse gases. A lot of countries have implemented various regulations and rules to reduce the energy usage in buildings and promoting the use of renewable energy technologies. This paper presents a parametric study of a typical multi-family building in its pre-design stage. The climate location used is Sweden (Gothenburg) and Japan (Osaka). The aim of the study is to compare various configurations and to examine how they affect the energy use. The most interesting configurations are the use of heat pump and solar cells. Other configurations that are examined are infiltration levels, pressure coefficients, wind impact, ventilation with heat recovery, ventilation scheduling, building orientation and finally changing U-values in the building material. Results of this study show that the energy saving, by utilizing a heat pump and solar panels, can reduce the total energy use by 34.9% for Gothenburg and 32% for Osaka. The results also show that the difference in total energy use between the two cities reduce substantially (3% difference) when utilizing a heat pump in combination with solar panels.
|
|
| 9. |
- Andersson, Harald, 1987-, et al.
(författare)
-
A numerical and experimental investigation of a confluent jets ventilation supply device in a conference room
- 2022
-
Ingår i: Energies. - : MDPI. - 1996-1073. ; 15:5
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, confluent jets ventilation (CJV) supply devices with three different nozzle arrays (1 × 19, 2 × 19, 3 × 19) were investigated both numerically and experimentally at two different airflow and supply air temperature set-ups. The performance of the CJV supply devices was investigated concerning thermal comfort, indoor air quality (IAQ), and heat removal effectiveness in a conference room environment. A comparison between the experimental and numerical results showed that the v2−f model had the best agreement out of the investigated turbulence models. The numerical results showed that the size of the array had a great impact both on near-field development and on the conditions in the occupied zone. A larger array with multiple rows and a lower momentum conserved the inlet temperature and the mean age of the air better than a single-row array with a higher momentum. A larger array with multiple rows had a higher IAQ and a greater heat removal effectiveness in the occupied zone because the larger array conserved the mean age of air better and the buoyancy driven flow was slightly better at removing the heat. Because of the lower inlet velocities, they also had lower velocities at ankle level, which decreased the risk of draft and thermal discomfort.
|
|
| 10. |
- Andersson, Harald, 1987-, et al.
(författare)
-
An Investigation Concerning Optimal Design of Confluent Jets Ventilation with Variable Air Volume
- 2024
-
Ingår i: The International Journal of Ventilation. - : Taylor & Francis. - 1473-3315 .- 2044-4044. ; 23:3, s. 183-203
-
Tidskriftsartikel (refereegranskat)abstract
- This parametric study aims to predict the performance of confluent jets ventilation (CJV) with variable air volume (VAV) from four CJV design parameters. A combination of computational fluid dynamics (CFD), and response surface method (RSM) has been used to predict the energy efficiency, thermal comfort and IAQ for the four expected vital design variables, i.e., heat load (XH), number of nozzles (XN), airflow rate (XQ) and supply temperature (XTS). The RSM was used to generate a quad-ratic equation for the response variables exhaust temperature (TE), sup-ply temperature (TP), PMV, DR, eT and ACE. The RSM shows that the TE, TP and PMV were independent of the number of nozzles. The proposed equations were used to generate setpoints optimized for thermal com-fort (PMV) for summer, spring and winter cases with different CLO fac-tors and different TS under a scenario where the heat load varied between 10-30W/m2. TE was used as setpoint to regulate the airflow rate to keep the PMV values close to zero. The results show that by adapting the TS to the CLO factor both thermal comfort and the energy efficiency can be improved. Further energy reduction can be gained by downregulating the airflow rate to keep the TP at a fixed setpoint when the heat load is decreased. This means that a CJV can effectively be combined with VAV to improve environmental performance with good thermal comfort (-0.5
|
|
