| 1. |
|
|
| 2. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 3. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 4. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 5. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 6. |
- Chen, Fu qiang, et al.
(författare)
-
Turbulent compressible flow analysis on multi-stage high pressure reducing valve
- 2018
-
Ingår i: Flow Measurement and Instrumentation. - : Elsevier BV. - 0955-5986. ; 61, s. 26-37
-
Tidskriftsartikel (refereegranskat)abstract
- Pressure reducing valve plays an important role in thermodynamic systems. Under extreme operating conditions, greater demands are requested on pressure reducing systems. In this paper, a novel multi-stage high pressure reducing valve (MSHPRV) is proposed, which can achieve multi-stage pressure reducing processes, improve the flow characteristics and deal with complex conditions. Here, the effects of different structural parameters on turbulent compressible flow inside MSHPRV are numerically investigated to achieve low valve noise and energy consumption. Mach number is taken as the parameter to reflect the fluid compressibility. Higher Mach number can cause serious aerodynamic noise and large amount of energy consumption. Based on this, transmission loss of MSHPRV is also studied to achieve better noise control performances. Meanwhile, larger turbulent dissipation rate means larger degree of energy consumption, so it is with the exergy loss. Thus, numerical models with different valve openings, perforated plate diameters, chamfer radii of perforated plates, pressure ratios and stages of perforated plates are established, and the effects of these structural parameters on the compressible turbulent flow and energy consumption of MSHPRV are investigated. Results show that different structural parameters have significant impacts on compressible turbulent flow and energy consumption performance in MSHPRV. The best noise control and least energy consumption of MSHPRV is achieved with such parameters as pressure ratio 7, perforated plate diameter 4 mm and 4 stage plates. This work can benefit the further research work on energy saving and multi-stage design of pressure reducing devices.
|
|
| 7. |
- Li, Qiang, et al.
(författare)
-
Microbial Necromass, Lignin, and Glycoproteins for Determining and Optimizing Blue Carbon Formation
- 2024
-
Ingår i: Environmental Science and Technology. - : American Chemical Society (ACS). - 0013-936X .- 1520-5851. ; 58, s. 468-479
-
Tidskriftsartikel (refereegranskat)abstract
- Coastal wetlands contribute to the mitigation of climate change through the sequestration of “blue carbon”. Microbial necromass, lignin, and glycoproteins (i.e., glomalin-related soil proteins (GRSP)), as important components of soil organic carbon (SOC), are sensitive to environmental change. However, their contributions to blue carbon formation and the underlying factors remain largely unresolved. To address this paucity of knowledge, we investigated their contributions to blue carbon formation along a salinity gradient in coastal marshes. Our results revealed decreasing contributions of microbial necromass and lignin to blue carbon as the salinity increased, while GRSP showed an opposite trend. Using random forest models, we showed that their contributions to SOC were dependent on microbial biomass and resource stoichiometry. In N-limited saline soils, contributions of microbial necromass to SOC decreased due to increased N-acquisition enzyme activity. Decreases in lignin contributions were linked to reduced mineral protection offered by short-range-ordered Fe (FeSRO). Partial least-squares path modeling (PLS-PM) further indicated that GRSP could increase microbial necromass and lignin formation by enhancing mineral protection. Our findings have implications for improving the accumulation of refractory and mineral-bound organic matter in coastal wetlands, considering the current scenario of heightened nutrient discharge and sea-level rise.
|
|
| 8. |
- Chen, Fu qiang, et al.
(författare)
-
Pressure analysis on two-step high pressure reducing system for hydrogen fuel cell electric vehicle
- 2017
-
Ingår i: International Journal of Hydrogen Energy. - : Elsevier BV. - 0360-3199. ; 42:16, s. 11541-11552
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogen fuel cell electric vehicle (FCEV) can achieve zero exhaust emission and zero pollution. In order to make FCEV reach a farther travel distance, greater demands are put on its pressure reducing system. In this paper, a two-step high pressure reducing system for FCEV is proposed. The system is made up of two parts, a new high multi-stage pressure reducing valve (HMSPRV) and a multi-stage muffler. As a new system, its feasibility has to be verified. Since the valve opening condition has a great effect on hydrogen flow, pressure reduction and energy consumption, different valve opening conditions are taken as the research point. The flow field analysis of the new HMSPRV is conducted on three aspects: pressure field, velocity field and energy consumption. It can be found that both the pressure reducing and velocity increasing gradients mainly reflect at those throttling components for all valve openings. For energy consumption, in the comprehensive study of flow vortexes and turbulent dissipation rate, it can be found that the larger of the valve opening, the larger of energy consumption. Then, a thermo-fluid-solid coupling analysis is conducted on the new HMSPRV, and it is concluded that the new system meets strength requirement. Furthermore, as the second step of the high pressure reducing system, the flow and pressure fields of multi-stage muffler are investigated. The five-stage muffler is exactly designed to complete the whole pressure reducing process. This study can provide technological support for achieving pressure regulation in the hydrogen transport system of FCEV when facing complex conditions, and it can also benefit the further research work on energy saving and multi-stage flow of pressure reducing devices.
|
|
| 9. |
- Chen, Fu qiang, et al.
(författare)
-
Thermo-mechanical stress and fatigue damage analysis on multi-stage high pressure reducing valve
- 2017
-
Ingår i: Annals of Nuclear Energy. - : Elsevier BV. - 0306-4549. ; 110, s. 753-767
-
Tidskriftsartikel (refereegranskat)abstract
- A multi-stage high pressure reducing valve (MSHPRV) is proposed. It can achieve a multi-stage pressure reducing way. Valve failure mainly occurs under high pressure and high temperature conditions, thus it is necessary to investigate the strength of MSHPRV under those complex conditions. In this paper, the mathematical model of MSHPRV is established and Computational Fluid Dynamics (CFD) method is employed to simulate its flow fields and thermo-mechanical stress. Next, the stress of MSHPRV under different opening time and the fatigue damage of MSHPRV under different valve openings are studied. Finally, two changes are provided on geometry of MSHPRV and the geometrical factors are optimized. The results show that, the radial direction from inner wall to outer wall is the main heat transfer direction for valve body. At opening time 50 s, the working condition of MSHPRV is dangerous condition. Meanwhile, the maximum value of thermal stress is 487 MPa, which is located at the upper end face of valve chamber region B3. There is a lag effect of stress distribution with respect to temperature distribution. The combined stress of valve body is composed of thermal stress and mechanical stress, in which thermal stress holds the dominant position. Moreover, with the increasing of valve opening, the fatigue damage of valve body increases correspondingly. It can be concluded that MSHPRV can cope with complex conditions like high pressure and high temperature. In the optimization design of MSHPRV, it can be found that the best strength of MSHPRV is achieved with such geometrical factors as angle 15, diameter 4 mm and 2 stage plates. Besides, radian design as the improved structure is recommended. This work can benefit the further research work on the regulation performance and safe operation of high pressure reducing valve.
|
|
| 10. |
- Fu, Pan, et al.
(författare)
-
Metasurface Enabled On-Chip Generation and Manipulation of Vector Beams from Vertical Cavity Surface-Emitting Lasers
- 2023
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; In Press
-
Tidskriftsartikel (refereegranskat)abstract
- Metasurface polarization optics that consist of 2D array of birefringent nano-antennas have proven remarkable capabilities to generate and manipulate vectorial fields with subwavelength resolution and high efficiency. Integrating this new type of metasurface with the standard vertical cavity surface-emitting laser (VCSEL) platform enables an ultracompact and powerful solution to control both phase and polarization properties of the laser on a chip, which allows to structure a VCSEL into vector beams with on-demand wavefronts. Here, this concept is demonstrated by directly generating versatile vector beams from commercially available VCSELs through on-chip integration of high-index dielectric metasurfaces. Experimentally, the versatility of the approach for the development of vectorial VCSELs are validated by implementing a variety of functionalities, including directional emission of multibeam with specified polarizations, vectorial holographic display, and vector vortex beams generations. Notably, the proposed vectorial VCSELs integrated with a single layer of beam shaping metasurface bypass the requirements of multiple cascaded optical components, and thus have the potential to promote the advancements of ultracompact, lightweight, and scalable vector beams sources, enriching and expanding the applications of VCSELs in optical communications, laser manipulation and processing, information encryption, and quantum optics.
|
|
