| 1. |
- Kristan, Matej, et al.
(författare)
-
The Ninth Visual Object Tracking VOT2021 Challenge Results
- 2021
-
Ingår i: 2021 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW 2021). - : IEEE COMPUTER SOC. - 9781665401913 ; , s. 2711-2738
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2021 is the ninth annual tracker benchmarking activity organized by the VOT initiative. Results of 71 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in recent years. The VOT2021 challenge was composed of four sub-challenges focusing on different tracking domains: (i) VOT-ST2021 challenge focused on short-term tracking in RGB, (ii) VOT-RT2021 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2021 focused on long-term tracking, namely coping with target disappearance and reappearance and (iv) VOT-RGBD2021 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2021 dataset was refreshed, while VOT-RGBD2021 introduces a training dataset and sequestered dataset for winner identification. The source code for most of the trackers, the datasets, the evaluation kit and the results along with the source code for most trackers are publicly available at the challenge website(1).
|
|
| 2. |
- Wang, Yuwen, et al.
(författare)
-
Fast room-temperature hydrogenation of nitroaromatics on Pd nanocrystal-boron cluster/graphene oxide nanosheets
- 2022
-
Ingår i: Molecular Catalysis. - : Elsevier. - 2468-8231. ; 529
-
Tidskriftsartikel (refereegranskat)abstract
- The reduction of nitroaromatics to aminoaromatics is essential for fine chemical production and effective sewage treatment. However, the activity of an external catalyst is essential for the reaction. In this study, Pd nanocrystals were anchored in situ on two-dimensional graphene oxide (GO), which acted as a catalyst support with high specific surface area. The oxygen-containing groups on the surface of GO bonded to the functionally rich boron clusters through hydrogen bonding interactions. A mildly reducible closed-dodecahydrododecaboric acid anion cluster (closo‑[B12H12]2–) was employed as the target site. The mild reducibility of closo‑[B12H12]2– resulted in a wide dispersion of ultrafine Pd nanocrystals on GO. Under ambient conditions, Pd/BGO rapidly hydrogenated nitroaromatics, such as 4-nitrophenol, to aminoaromatics with approximately 100% efficiency. Moreover, Pd/BGO retained its high catalytic activity for the hydrogenation/reduction of 4-nitrophenol after five catalytic cycles. Therefore, Pd/BGO could be a promising and economically viable candidate for various practical applications. The proposed innovative preparation strategy and highly efficient catalytic activity suggested the effective performance of closo‑[B12H12]2– as nanometal nucleation target sites. In addition to providing an alternate route for preparing supported nanometals, this study presents a stable and efficient catalyst for the hydrogenation of nitroaromatics.
|
|
| 3. |
- Zhao, Xue, et al.
(författare)
-
Electron modulation and morphology engineering jointly accelerate oxygen reaction to enhance Zn-Air battery performance
- 2023
-
Ingår i: Advanced Science. - : John Wiley & Sons. - 2198-3844. ; 10:8
-
Tidskriftsartikel (refereegranskat)abstract
- Combining morphological control engineering and diatomic coupling strategies, heteronuclear Fe-Co bimetals are efficiently intercalated into nitrogen-doped carbon materials with star-like to simultaneously accelerate oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The half-wave potential and kinetic current density of the ORR driven by FeCoNC/SL surpass the commercial Pt/C catalyst. The overpotential of OER is as low as 316 mV (η10), and the mass activity is at least 3.2 and 9.4 times that of mononuclear CoNC/SL and FeNC/SL, respectively. The power density and specific capacity of the Zn-air battery with FeCoNC/SL as air cathode are as high as 224.8 mW cm−2 and 803 mAh g−1, respectively. Morphologically, FeCoNC/SL endows more reactive sites and accelerates the process of oxygen reaction. Density functional theory reveals the active site of the heteronuclear diatomic, and the formation of FeCoN5C configuration can effectively tune the d-band center and electronic structure. The redistribution of electrons provides conditions for fast electron exchange, and the change of the center of the d-band avoids the strong adsorption of intermediate species to simultaneously take into account both ORR and OER and thus achieve high-performance Zn-air batteries.
|
|
| 4. |
- Bi, Zenghui, et al.
(författare)
-
Three dimensional star-like mesoporous nitrogen-doped carbon anchored with highly dispersed Fe and Ce dual-sites for efficient oxygen reduction reaction in Zn-air battery
- 2022
-
Ingår i: Colloid and Interface Science Communications. - : Elsevier. - 2215-0382. ; 49
-
Tidskriftsartikel (refereegranskat)abstract
- Metal‑nitrogen‑carbon materials (M-N-C) have attracted much attention due to their low cost, high abundance, and efficient catalytic performance. Nevertheless, Fe-N-C materials are considered the most promising oxygen reduction reaction (ORR) catalysts for replacing noble metals. Ce is chemically active and has many metal valence states, and empty orbitals that can participate in coordination. On this basis, Fe, Ce-codoped catalyst was constructed in this study. The synergistic effect of the dual metal centers was verified, and a Fe, Ce-codoped nitrogen-doped carbon (FeCeNC) with six equal branch angles was proposed. The half-wave potential for the ORR catalyzed by FeCeNC is 0.855 V. As a rechargeable Zn-air battery cathode catalyst, FeCeNC exhibits excellent electrochemical performances, with an open-circuit voltage of 1.427 V, a maximum power density of 169.2 mW cm−2 and a stable cycling time of 80 h, demonstrating an excellent cycle performance.
|
|
| 5. |
- Geng, Longlong, et al.
(författare)
-
Valence-mixed CuOx-nanoparticles anchored biomass-based carbon nanofiber for boosting toxic nitroarenes reduction : Synthesis, kinetics, and mechanisms
- 2022
-
Ingår i: Journal of Environmental Chemical Engineering. - : Elsevier. - 2213-3437. ; 10:6
-
Tidskriftsartikel (refereegranskat)abstract
- The rational modulation of metal catalysts with tailorable valence and redox properties is a promising strategy for further improving their catalytic performance. Herein, an environment-friendly grafting and thermal strategy was adopted to immobilize copper oxides nanoparticles on carbon nanofiber (CuOx/CF). Benefiting from the defect-rich surface and valence-mixed composition of the CuOx species, the optimized sample CuOx/CF-3 exhibits superb activity for the catalytic reduction of toxic nitrophenols. The complete conversion took only 1 min and an outstanding rate constant (k) of 112.7 × 10-3 s-1 was achieved under mild conditions (25 °C and 1 atm). Kinetic and recycle experiments demonstrated that the whole catalytic process obeys a pseudo-order kinetic, and the catalyst could maintain high conversion even after 13 successive recycles. These results demonstrate that CuOx/CF-3 is an alternative catalyst to noble metals, providing superb catalytic efficiency and stability in the reduction of toxic nitrophenols, and it can be expanded to develop other noble-metal-free catalysts for various applications.
|
|
| 6. |
- He, Yingnan, et al.
(författare)
-
Separable amino-functionalized biochar/alginate beads for efficient removal of Cr(VI) from original electroplating wastewater at room temperature
- 2022
-
Ingår i: Journal of Cleaner Production. - : Elsevier. - 0959-6526 .- 1879-1786. ; 373
-
Tidskriftsartikel (refereegranskat)abstract
- An alginate gel bead composite adsorbent with polyethyleneimine (PEI) as a surface modifier and Eichhornia crassipes (EC) biochar, known as EC-alg/PEI-3, was added internally to the adsorb Cr(VI) from an aqueous environment. The functionalized gel beads were characterized using SEM, XPS, FTIR, and other techniques. The maximum adsorption capacities of EC-alg/PEI-3 were 714.3 mg g−1 at 10 °C and 769.2 mg g−1 at 25 °C. In the treatment of highly concentrated electroplating wastewater, EC-alg/PEI-3 can be dosed at 1.4 g L−1 to reduce the concentration of Cr(VI) to below 0.05 ppm. EC-alg/PEI-3 maintained a competitive adsorption capacity after six cycles. This spherical adsorbent material is easy to prepare, has a very high adsorption capacity, is environmentally friendly, and can be easily recycled. The EC-alg/PEI-3 gel beads are promising for the treatment of industrial wastewater.
|
|
| 7. |
- He, Yingnan, et al.
(författare)
-
Separatable MoS2 loaded biochar/CaCO3/Alginate gel beads for selective and efficient removal of Pb(II) from aqueous solution
- 2022
-
Ingår i: Separation and Purification Technology. - : Elsevier. - 1383-5866 .- 1873-3794. ; 303
-
Tidskriftsartikel (refereegranskat)abstract
- Centimeter-scale composite biochar-alginate gel beads (MoS2B/CaCO3/Alg) were designed for the adsorption of Pb(II) in water using MoS2 modified biochar as the filler, alginate as the matrix, and CaCO3 as the active additive component. The composite gel beads were characterized using scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and other techniques. MoS2B/CaCO3/Alg showed excellent adsorption capacity over a wide range of pH 4–7. The maximum adsorption capacities obtained using the Langmuir model were 769.2, 833.3, and 909.1 mg g−1 at 10, 25 and 40 °C, respectively. At a dosing rate of 0.4 g L−1, MoS2B/CaCO3/Alg was able to reduce the Pb(II) concentration to below 0.05 ppm in complex simulated lead battery wastewater. After 10 repeated cycles, MoS2B/CaCO3/Alg maintained a high removal rate of 98.4 %. This spherical adsorbent is simple to prepare and easy to recover, has an ultra-high adsorption capacity, and is mechanically stable and resistant to interference, thus it is expected to be suitable for application in industrial wastewater treatment.
|
|
| 8. |
- Huang, Ruihua, et al.
(författare)
-
Three-dimensional porous high boron-nitrogen-doped carbon for the ultrasensitive electrochemical detection of trace heavy metals in food samples
- 2023
-
Ingår i: Journal of Hazardous Materials. - : Elsevier. - 0304-3894 .- 1873-3336. ; 442
-
Tidskriftsartikel (refereegranskat)abstract
- Exposure to even trace amounts of Cd(II) and Pb(II) in food can have serious effects on the human body. Therefore, the development of novel electrochemical sensors that can accurately detect the different toxicity levels of heavy metal ions in food is of great significance. Based on the principle of green chemistry, we propose a new type of boron and nitrogen co-doped carbon (BCN) material derived from a metal-organic framework material and study its synthesis, characterization, and heavy-metal ion detection ability. Under the optimum conditions, the BCN-modified glassy carbon electrode was studied using square-wave anodic stripping voltammetry, which showed good electrochemical responses to Cd(II) and Pb(II), with sensitivities as low as 0.459 and 0.509 μA/μM cm2, respectively. The sensor was successfully used to detect Cd(II) and Pb(II) in Beta vulgaris var. cicla L samples, which is consistent with the results obtained using inductively coupled plasma-mass spectrometry. It also has a strong selectivity for complex samples. This study provides a novel approach for the detection of heavy metal ions in food and greatly expands the application of heteroatom-doped metal-free carbon materials in detection platforms.
|
|
| 9. |
- Peng, Yan, et al.
(författare)
-
Cu Nanoparticle-Decorated Boron-Carbon-Nitrogen Nanosheets for Electrochemical Determination of Chloramphenicol
- 2022
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 14:25, s. 28956-28964
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, irregular Cu nanoparticle-decorated boron-carbon-nitrogen (Cu-BCN) nanosheets were successfully synthesized. A Cu-BCN dispersion was deposited on a bare glassy carbon electrode (GCE) to prepare an electrochemical sensor (Cu-BCN/GCE) for the detection of chloramphenicol (CAP) in the environment. Cu-BCN was characterized using high-resolution scanning transmission electron microscopy (HRSTEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, and X-ray photoelectron spectroscopy (XPS). The performance of the Cu-BCN/GCE was studied using electrochemical impedance spectroscopy (EIS), and its advantages were proven by electrode comparison. Differential pulse voltammetry (DPV) was used to optimize the experimental conditions, including the amount of Cu-BCN deposited, enrichment potential, deposition time, and pH of the electrolyte. A linear relationship between the CAP concentration and current response was obtained under the optimized experimental conditions, with a wide linear range and a limit of detection (LOD) of 2.41 nmol/L. Cu-BCN/GCE exhibited high stability, reproducibility, and repeatability. In the presence of various organic and inorganic species, the influence of the Cu-BCN-based sensor on the current response of CAP was less than 5%. Notably, the prepared sensor exhibited excellent performance in real-water samples, with satisfactory recovery.
|
|
| 10. |
- Wang, Yuwen, et al.
(författare)
-
Dodecahydrododecaborate anion cluster-reduced nano-Au-decorated graphene oxide for 100% hydrogenation of nitroaromatics
- 2022
-
Ingår i: Colloid and Interface Science Communications. - : Elsevier. - 2215-0382. ; 50
-
Tidskriftsartikel (refereegranskat)abstract
- The reduction of nitroaromatics is important in industrial wastewater treatment. However, the activity of an external catalyst is critical for the reaction. In this study, Au nanocrystals were anchored in situ on two-dimensional graphene oxide (GO), which had oxygen-rich groups on its surface. Oxygen-containing groups combined to form functional boron clusters through hydrogen bond interactions (BGO). The mild reducibility of a dodecahydrododecaborate anion cluster (closo-[B12H12]2−) made ultrafine Au nanocrystals uniformly disperse on GO (Au/BGO). 4-Nitrophenol and other nitro-aromatic hydrocarbons could be rapidly hydrogenated into aminoaromatic hydrocarbons by Au/BGO, and the hydrogenation efficiency was approximately 100%. It retained high catalytic activity after 16 catalytic cycles. Therefore, the proposed innovative preparation strategy and high catalytic activity indicate the advancement of closo-[B12H12]2− as a nucleation target for nanometals. This study provides a stable and efficient catalyst for the hydrogenation of nitroaromatics and an alternative approach for the preparation of supported nano-metals.
|
|
