| 1. |
|
|
| 2. |
- Li, Wei, et al.
(författare)
-
Non-lab and semi-lab algorithms for screening undiagnosed diabetes : A cross-sectional study
- 2018
-
Ingår i: EBioMedicine. - : ELSEVIER SCIENCE BV. - 2352-3964. ; 35, s. 307-316
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The terrifying undiagnosed rate and high prevalence of diabetes have become a public emergency. A high efficiency and cost-effective early recognition method is urgently needed. We aimed to generate innovative, user-friendly nomograms that can be applied for diabetes screening in different ethnic groups in China using the non-lab or noninvasive semi-lab data. Methods: This multicenter, multi-ethnic, population-based, cross-sectional study was conducted in eight sites in China by enrolling subjects aged 20-70. Sociodemographic and anthropometric characteristics were collected. Blood and urine samples were obtained 2 h following a standard 75 g glucose solution. In the final analysis, 10,794 participants were included and randomized into model development (n - 8096) and model validation (n = 2698) group with a ratio of 3:1. Nomograms were developed by the stepwise binary logistic regression. The nomograms were validated internally by a bootstrap sampling method in the model development set and externally in the model validation set. The area under the receiver operating characteristic curve (AUC) was used to assess the screening performance of the nomograms. Decision curve analysis was applied to calculate the net benefit of the screening model. Results: The overall prevalence of undiagnosed diabetes was 9.8% (1059/10794) according to ADA criteria. The non-lab model revealed that gender, age, body mass index, waist circumference, hypertension, ethnicities, vegetable daily consumption and family history of diabetes were independent risk factors for diabetes. By adding 2 h post meal glycosuria qualitative to the non-lab model, the semi-lab model showed an improved Akaike information criterion (AIC: 4506 to 3580). The AUC of the semi-lab model was statistically larger than the non-lab model (0.868 vs 0.763, P < 0.001). The optimal cutoff probability in semi-lab and non-lab nomograms were 0.088 and 0.098, respectively. The sensitivity and specificity were 76.3% and 81.6%, respectively in semi-lab nomogram, and 72.1% and 673% in non-lab nomogram at the optimal cut off point. The decision curve analysis also revealed a bigger decrease of avoidable OGTT test (52 per 100 subjects) in the semi-lab model compared to the non-lab model (36 per 100 subjects) and the existed New Chinese Diabetes Risk Score (NCDRS, 35 per 100 subjects). Conclusion: The non-lab and semi-lab nomograms appear to be reliable tools for diabetes screening, especially in developing countries. However, the semi-lab model outperformed the non-lab model and NCDRS prediction systems and might be worth being adopted as decision support in diabetes screening in China.
|
|
| 3. |
- Ding, Haoming, et al.
(författare)
-
Chemical scissor-mediated structural editing of layered transition metal carbides
- 2023
-
Ingår i: Science. - : AMER ASSOC ADVANCEMENT SCIENCE. - 0036-8075 .- 1095-9203. ; 379:6637, s. 1130-1135
-
Tidskriftsartikel (refereegranskat)abstract
- Intercalated layered materials offer distinctive properties and serve as precursors for important two-dimensional (2D) materials. However, intercalation of non-van der Waals structures, which can expand the family of 2D materials, is difficult. We report a structural editing protocol for layered carbides (MAX phases) and their 2D derivatives (MXenes). Gap-opening and species-intercalating stages were respectively mediated by chemical scissors and intercalants, which created a large family of MAX phases with unconventional elements and structures, as well as MXenes with versatile terminals. The removal of terminals in MXenes with metal scissors and then the stitching of 2D carbide nanosheets with atom intercalation leads to the reconstruction of MAX phases and a family of metal-intercalated 2D carbides, both of which may drive advances in fields ranging from energy to printed electronics.
|
|
| 4. |
- Li, Youbing, et al.
(författare)
-
A-site alloying-guided universal design of noble metal-based MAX phases
- 2024
-
Ingår i: Matter. - : Cell Press. - 2590-2393 .- 2590-2385. ; 7:2, s. 523-538
-
Tidskriftsartikel (refereegranskat)abstract
- Mn+1AXn (MAX) phases have attracted significant attention due to their structural diversity and potential applications. Designing MAX phases with single-atom-thick A layers featuring 4d/5d-orbital electronic elements is interesting work. Here, we present a comprehensive report on noble metal-based M2(A1-xA′x)C (M = V, Ti, Nb; A = Al, Sn, In, Ga, Ge; A′ = Ru, Rh, Pd, Ir, Pt, Au and combinations thereof; 0 < x ≤ 0.4) phases featuring A sublayers of 4d/5d-orbital electronic elements through an A-site alloying strategy. The chemical composition of MAX phases can be adjusted by selecting different M- and A-site elements, with morphology tailored by distinct C sources. Furthermore, the V2(Sn0.8Pt0.2)C (15.7 wt % Pt) catalyst showed better performance for hydrogen evolution reaction compared to the commercial Pt/C (20 wt % Pt) electrode. This study highlights the prospects of A-site alloying for the design of novel MAX phases with unique properties and promising applications in electrocatalysis and beyond.
|
|
| 5. |
- Li, Youbing, et al.
(författare)
-
Nanolaminated Ternary Transition Metal Carbide (MAX Phase)-Derived Core-Shell Structure Electrocatalysts for Hydrogen Evolution and Oxygen Evolution Reactions in Alkaline Electrolytes
- 2023
-
Ingår i: The Journal of Physical Chemistry Letters. - : AMER CHEMICAL SOC. - 1948-7185. ; 14:2, s. 481-488
-
Tidskriftsartikel (refereegranskat)abstract
- The development of abundant, cheap, and highly active catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is important for hydrogen production. Nanolaminate ternary transition metal carbides (MAX phases) and their derived two-dimensional transition metal carbides (MXenes) have attracted considerable interest for electrocatalyst applications. Herein, four new MAX@MXene core-shell structures (Ta2CoC@ Ta2CTx, Ta2NiC@Ta2CTx, Nb2CoC@Nb2CTx, and Nb2NiC@Nb2CTx), in which the core region is Co/Ni-MAX phases while the edge region is MXenes, have been prepared. Under alkaline electrolyte conditions, the Ta2CoC@Ta2CTx core-shell structure showed an overpotential of 239 mV and excellent stability during the HER with MXenes as the active sites. For the OER, the Ta2CoC@Ta2CTx core- shell structure showed an overpotential of 373 mV and a small Tafel plot (56 mV dec-1), which maintained a bulk crystalline structure and generated Co-based oxyhydroxides that formed by surface reconstruction as active sites. Considering rich chemical compositions and structures of MAX phases, this work provides a new strategy for designing multifunctional electrocatalysts and also paves the way for further development of MAX phase-based materials for clean energy applications.
|
|
| 6. |
- Ding, Haoming, et al.
(författare)
-
Progress in Structural Tailoring and Properties of Ternary Layered Ceramics
- 2023
-
Ingår i: Journal of Inorganic Materials. - : SCIENCE PRESS. - 1000-324X. ; 38:8, s. 845-884
-
Forskningsöversikt (refereegranskat)abstract
- MAX/MAB phases are a series of non-van der Waals ternary layered ceramic materials with a hexagonal structure, rich in elemental composition and crystal structure, and embody physical properties of both ceramics and metals. They exhibit great potential for applications in extreme environments such as high temperature, strong corrosion, and irradiation. In recent years, two-dimensional (2D) materials derived from the MAX/MAB phase (MXene and MBene) have attracted enormous interest in the fields of materials physics and materials chemistry and become a new 2D van der Waals material after graphene and transition metal dichalcogenides. Therefore, structural modulation of MAX/MAB phase materials is essential for understanding the intrinsic properties of this broad class of layered ceramics and for investigating the functional properties of their derived structures. In this paper, we summarize new developments in MAX/MAB phases in recent years in terms of structural modulation, theoretical calculation, and fundamental application research and provide an outlook on the key challenges and prospects for the future development of these layered materials.
|
|
| 7. |
- Ding, Haoming, et al.
(författare)
-
Synthesis of MAX phases Nb2CuC and Ti2(Al0.1Cu0.9)N by A-site replacement reaction in molten salts
- 2019
-
Ingår i: Materials Research Letters. - : Taylor & Francis. - 2166-3831. ; 7:12, s. 510-516
-
Tidskriftsartikel (refereegranskat)abstract
- New MAX phases Ti2(AlxCu1−x)N and Nb2CuC were synthesized by A-site replacement by reacting Ti2AlN and Nb2AlC, respectively, with CuCl2 or CuI molten salt. X-ray diffraction, scanning electron microscopy, and atomically resolved scanning transmission electron microscopy showed complete A-site replacement in Nb2AlC, which lead to the formation of Nb2CuC. However, the replacement of Al in Ti2AlN phase was only close to complete at Ti2(Al0.1Cu0.9)N. Density-functional theory calculations corroborated the structural stability of Nb2CuC and Ti2CuN phases. Moreover, the calculated cleavage energy in these Cu-containing MAX phases are weaker than in their Al-containing counterparts.The preparation of MAX phases Nb2CuC and Ti2(Al0.1Cu0.9)N were realized by A-site replacement in Ti2AlN and Nb2AlN, respectively.
|
|
| 8. |
- Heap, Graham A., et al.
(författare)
-
HLA-DQA1-HLA-DRB1 variants confer susceptibility to pancreatitis induced by thiopurine immunosuppressants
- 2014
-
Ingår i: Nature Genetics. - : Nature Publishing Group. - 1061-4036 .- 1546-1718. ; 46:10, s. 1131-1134
-
Tidskriftsartikel (refereegranskat)abstract
- Pancreatitis occurs in approximately 4% of patients treated with the thiopurines azathioprine or mercaptopurine. Its development is unpredictable and almost always leads to drug withdrawal. We identified patients with inflammatory bowel disease (IBD) who had developed pancreatitis within 3 months of starting these drugs from 168 sites around the world. After detailed case adjudication, we performed a genome-wide association study on 172 cases and 2,035 controls with IBD. We identified strong evidence of association within the class II HLA region, with the most significant association identified at rs2647087 (odds ratio 2.59, 95% confidence interval 2.07-3.26, P = 2 x 10(-16)). We replicated these findings in an independent set of 78 cases and 472 controls with IBD matched for drug exposure. Fine mapping of the H LA region identified association with the HLA-DQA1*02:01-HLA-DRB1*07:01 haplotype. Patients heterozygous at rs2647087 have a 9% risk of developing pancreatitis after administration of a thiopurine, whereas homozygotes have a 17% risk.
|
|
| 9. |
- Kauppi, Karolina, et al.
(författare)
-
Revisiting Antipsychotic Drug Actions Through Gene Networks Associated With Schizophrenia
- 2018
-
Ingår i: American Journal of Psychiatry. - : AMER PSYCHIATRIC PUBLISHING, INC. - 0002-953X .- 1535-7228. ; 175:7, s. 674-682
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: Antipsychotic drugs were incidentally discovered in the 1950s, but their mechanisms of action are still not understood. Better understanding of schizophrenia pathogenesis could shed light on actions of current drugs and reveal novel "druggable" pathways for unmet therapeutic needs. Recent genome-wide association studies offer unprecedented opportunities to characterize disease gene networks and uncover drug-disease relationships. Polygenic overlap between schizophrenia risk genes and antipsychotic drug targets has been demonstrated, but specific genes and pathways constituting this overlap are undetermined. Risk genes of polygenic disorders do not operate in isolation but in combination with other genes through protein-protein interactions among gene product.Method: The protein interactome was used to map antipsychotic drug targets (N=88) to networks of schizophrenia risk genes (N=328).Results: Schizophrenia risk genes were significantly localized in the interactome, forming a distinct disease module. Core genes of the module were enriched for genes involved in developmental biology and cognition, which may have a central role in schizophrenia etiology. Antipsychotic drug targets overlapped with the core disease module and comprised multiple pathways beyond dopamine. Some important risk genes like CHRN, PCDH, and HCN families were not connected to existing antipsychotics but may be suitable targets for novel drugs or drug repurposing opportunities to treat other aspects of schizophrenia, such as cognitive or negative symptoms.Conclusions: The network medicine approach provides a platform to collate information of disease genetics and drug-gene interactions to shift focus from development of antipsychotics to multitarget antischizophrenia drugs. This approach is transferable to other diseases.
|
|
| 10. |
- Kozhevnikov, Evgeny, et al.
(författare)
-
A dual-transduction-integrated biosensing system to examine the 3D cell-culture for bone regeneration
- 2019
-
Ingår i: Biosensors & bioelectronics. - : ELSEVIER ADVANCED TECHNOLOGY. - 0956-5663 .- 1873-4235. ; 141
-
Tidskriftsartikel (refereegranskat)abstract
- Three-dimensional (3D) cell cultures developed with living cells and scaffolds have demonstrated outstanding potential for tissue engineering and regenerative medicine applications. However, no suitable tools are available to monitor dynamically variable cell behavior in such a complex microenvironment. In particular, simultaneously assessing cell behavior, cell secretion, and the general state of a 3D culture system is of a really challenging task. This paper presents our development of a dual-transduction-integrated biosensing system that assesses electrical impedance in conjunction with imaging techniques to simultaneously investigate the 3D cell-culture for bone regeneration. First, we created models to mimic the dynamic deposition of the extracellular matrix (ECM) in 3D culture, which underwent osteogenesis by incorporating different amounts of bone-ECM components (collagen, hydroxyapatite [HAp], and hyaluronic acid [HA]) into alginate-based hydrogels. The formed models were investigated by means of electrical impedance spectroscopy (EIS), with the results showing that the impedances increased linearly with collagen and hyaluronan, but changed in a more complex manner with HAp. Thereafter, we created two models that consisted of primary osteoblast cells (OBs), which expressed the enhanced green fluorescent protein (EGFP), and 4T1 cells, which secreted the EGFP-HA, in the alginate hydrogel. We found the capacitance (associated with impedance and measured by EIS) increased with the increases in initial embedded OBs, and also confirmed the cell proliferation over 3 days with the EGFP signal as monitored by the fluorescent imaging component in our system. Interestingly, the change in capacitance is found to be associated with OB migration following stimulation. Also, we show higher capacitance in 4T1 cells that secret HA when compared to control 4T1 cells after a 3-day culture. Taken together, we demonstrate that our biosensing system is able to investigate the dynamic process of 3D culture in a non-invasive and real-time manner.
|
|
