1. |
- Lacour, S., et al.
(författare)
-
The mass of β Pictoris c from β Pictoris b orbital motion
- 2021
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 654
-
Tidskriftsartikel (refereegranskat)abstract
- Aims. We aim to demonstrate that the presence and mass of an exoplanet can now be effectively derived from the astrometry of another exoplanet.Methods. We combined previous astrometry of β Pictoris b with a new set of observations from the GRAVITY interferometer. The orbital motion of β Pictoris b is fit using Markov chain Monte Carlo simulations in Jacobi coordinates. The inner planet, β Pictoris c, was also reobserved at a separation of 96 mas, confirming the previous orbital estimations.Results. From the astrometry of planet b only, we can (i) detect the presence of β Pictoris c and (ii) constrain its mass to 10.04(-3.10)(+4.53) M-Jup. If one adds the astrometry of β Pictoris c, the mass is narrowed down to 9.15(-1.06)(+1.08) M-Jup. The inclusion of radial velocity measurements does not affect the orbital parameters significantly, but it does slightly decrease the mass estimate to 8.89(-0.75)(+0.75) M-Jup. With a semimajor axis of 2.68 +/- 0.02 au, a period of 1221 +/- 15 days, and an eccentricity of 0.32 +/- 0.02, the orbital parameters of β Pictoris c are now constrained as precisely as those of β Pictoris b. The orbital configuration is compatible with a high-order mean-motion resonance (7:1). The impact of the resonance on the planets' dynamics would then be negligible with respect to the secular perturbations, which might have played an important role in the eccentricity excitation of the outer planet.
|
|
2. |
- Lagrange, A. M., et al.
(författare)
-
Unveiling the beta Pictoris system, coupling high contrast imaging, interferometric, and radial velocity data
- 2020
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 642
-
Tidskriftsartikel (refereegranskat)abstract
- Context. The nearby and young beta Pictoris system hosts a well resolved disk, a directly imaged massive giant planet orbiting at similar or equal to 9 au, as well as an inner planet orbiting at similar or equal to 2.7 au, which was recently detected through radial velocity (RV). As such, it offers several unique opportunities for detailed studies of planetary system formation and early evolution.Aims. We aim to further constrain the orbital and physical properties of beta Pictoris b and c using a combination of high contrast imaging, long base-line interferometry, and RV data. We also predict the closest approaches or the transit times of both planets, and we constrain the presence of additional planets in the system.Methods. We obtained six additional epochs of SPHERE data, six additional epochs of GRAVITY data, and five additional epochs of RV data. We combined these various types of data in a single Markov-chain Monte Carlo analysis to constrain the orbital parameters and masses of the two planets simultaneously. The analysis takes into account the gravitational influence of both planets on the star and hence their relative astrometry. Secondly, we used the RV and high contrast imaging data to derive the probabilities of presence of additional planets throughout the disk, and we tested the impact of absolute astrometry.Results. The orbital properties of both planets are constrained with a semi-major axis of 9.8 0.4 au and 2.7 +/- 0.02 au for b and c, respectively, and eccentricities of 0.09 +/- 0.1 and 0.27 +/- 0.07, assuming the HIPPARCOS distance. We note that despite these low fitting error bars, the eccentricity of beta Pictoris c might still be over-estimated. If no prior is provided on the mass of beta Pictoris b, we obtain a very low value that is inconsistent with what is derived from brightness-mass models. When we set an evolutionary model motivated prior to the mass of beta Pictoris b, we find a solution in the 10-11 M-Jup range. Conversely, beta Pictoris c's mass is well constrained, at 7.8 +/- 0.4 M-Jup, assuming both planets are on coplanar orbits. These values depend on the assumptions on the distance of the beta Pictoris system. The absolute astrometry HIPPARCOS-Gaia data are consistent with the solutions presented here at the 2 sigma level, but these solutions are fully driven by the relative astrometry plus RV data. Finally, we derive unprecedented limits on the presence of additional planets in the disk. We can now exclude the presence of planets that are more massive than about 2.5 M-Jup closer than 3 au, and more massive than 3.5 M-Jup between 3 and 7.5 au. Beyond 7.5 au, we exclude the presence of planets that are more massive than 1-2 M-Jup.Conclusions. Combining relative astrometry and RVs allows one to precisely constrain the orbital parameters of both planets and to give lower limits to potential additional planets throughout the disk. The mass of beta Pictoris c is also well constrained, while additional RV data with appropriate observing strategies are required to properly constrain the mass of beta Pictoris b.
|
|
3. |
|
|
4. |
|
|
5. |
- Engler, N., et al.
(författare)
-
The high-albedo, low polarization disk around HD 114082 that harbors a Jupiter-sized transiting planet Constraints from VLT/SPHERE completed with TESS, Gaia, and radial velocities
- 2023
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 672
-
Tidskriftsartikel (refereegranskat)abstract
- Aims. We present new optical and near-infrared images of the debris disk around the F-type star HD 114082 in the Scorpius-Centaurus OB association. We obtained direct imaging observations and analyzed the TESS photometric time series data of this target with the goal of searching for planetary companions to HD 114082 and characterizing the morphology of the debris disk and the scattering properties of dust particles. Methods. HD 114082 was observed with the VLT/SPHERE instrument in different modes - the IRDIS camera in the K band (2.0-2.3 mu m) together with the IFS in the Y, J, and H bands (0.95-1.66 mu m) using the angular differential imaging technique as well as IRDIS in the H band (1.5-1.8 mu m) and ZIMPOL in the I_PRIME band (0.71-0.87 mu m) using the polarimetric differential imaging technique. To constrain the basic geometrical parameters of the disk and the scattering properties of dust grains, scattered light images were fitted with a 3D model for single scattering in an optically thin dust disk using a Markov chain Monte Carlo approach. We performed aperture photometry to derive the scattering and polarized phase functions, the polarization fraction, and the spectral scattering albedo for the dust particles in the disk. This method was also used to obtain the reflectance spectrum of the disk and, in turn, to retrieve the disk color and study the dust reflectivity in comparison to the debris disk HD 117214. We also performed the modeling of the HD 114082 light curve measured by TESS using models for planet transit and stellar activity to put constraints on the radius of the detected planet and its orbit. Last, we searched for additional planets in the system by combining archival radial velocity data, astrometry, and direct imaging. Results. The debris disk HD 114082 appears as an axisymmetric debris belt with a radius of similar to 0.37 '' (35 au), an inclination of similar to 83 degrees, and a wide inner cavity. Dust particles in HD 114082 have a maximum polarization fraction of similar to 17% and a higher reflectivity when compared to the debris disk HD 117214. This high reflectivity results in a spectral scattering albedo of similar to 0.65 for the HD 114082 disk at near-infrared wavelengths. The disk reflectance spectrum exhibits a red color at the position of the planetesimal belt and shows no obvious features, whereas that of HD 117214 might indicate the presence of CO2 ice. The analysis of TESS photometric data reveals a transiting planetary companion to HD 114082 with a radius of similar to 1 R-Jup on an orbit with a semimajor axis of 0.7 +/- 0.4 au. No additional planet was detected in the system when we combined the SPHERE images with constraints from astrometry and radial velocity. We reach deep sensitivity limits down to similar to 5 M-Jup at 50 au and similar to 10 M-Jup at 30 au from the central star.
|
|
6. |
- Milli, J., et al.
(författare)
-
Discovery of a low-mass companion inside the debris ring surrounding the F5V star HD 206893
- 2017
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 597
-
Tidskriftsartikel (refereegranskat)abstract
- Aims. Uncovering the ingredients and the architecture of planetary systems is a very active field of research that has fuelled many new theories on giant planet formation, migration, composition, and interaction with the circumstellar environment. We aim at discovering and studying new such systems, to further expand our knowledge of how low-mass companions form and evolve.Methods. We obtained high-contrast H-band images of the circumstellar environment of the F5V star HD 206893, known to host a debris disc never detected in scattered light. These observations are part of the SPHERE High Angular Resolution Debris Disc Survey (SHARDDS) using the InfraRed Dual-band Imager and Spectrograph (IRDIS) installed on VLT/SPHERE.Results. We report the detection of a source with a contrast of 3.6 × 10−5 in the H-band, orbiting at a projected separation of 270 milliarcsecond or 10 au, corresponding to a mass in the range 24 to 73MJup for an age of the system in the range 0.2 to 2 Gyr. The detection was confirmed ten months later with VLT/NaCo, ruling out a background object with no proper motion. A faint extended emission compatible with the disc scattered light signal is also observed.Conclusions. The detection of a low-mass companion inside a massive debris disc makes this system an analog of other young planetary systems such as β Pictoris, HR 8799 or HD 95086 and requires now further characterisation of both components to understand their interactions.
|
|
7. |
|
|
8. |
- Gossec, L, et al.
(författare)
-
EULAR points to consider for the use of big data in rheumatic and musculoskeletal diseases
- 2020
-
Ingår i: Annals of the rheumatic diseases. - : BMJ. - 1468-2060 .- 0003-4967. ; 79:1, s. 69-76
-
Tidskriftsartikel (refereegranskat)abstract
- Tremendous opportunities for health research have been unlocked by the recent expansion of big data and artificial intelligence. However, this is an emergent area where recommendations for optimal use and implementation are needed. The objective of these European League Against Rheumatism (EULAR) points to consider is to guide the collection, analysis and use of big data in rheumatic and musculoskeletal disorders (RMDs).MethodsA multidisciplinary task force of 14 international experts was assembled with expertise from a range of disciplines including computer science and artificial intelligence. Based on a literature review of the current status of big data in RMDs and in other fields of medicine, points to consider were formulated. Levels of evidence and strengths of recommendations were allocated and mean levels of agreement of the task force members were calculated.ResultsThree overarching principles and 10 points to consider were formulated. The overarching principles address ethical and general principles for dealing with big data in RMDs. The points to consider cover aspects of data sources and data collection, privacy by design, data platforms, data sharing and data analyses, in particular through artificial intelligence and machine learning. Furthermore, the points to consider state that big data is a moving field in need of adequate reporting of methods and benchmarking, careful data interpretation and implementation in clinical practice.ConclusionThese EULAR points to consider discuss essential issues and provide a framework for the use of big data in RMDs.
|
|
9. |
- Kedra, J, et al.
(författare)
-
Current status of use of big data and artificial intelligence in RMDs: a systematic literature review informing EULAR recommendations
- 2019
-
Ingår i: RMD open. - : BMJ. - 2056-5933. ; 5:2, s. e001004-
-
Tidskriftsartikel (refereegranskat)abstract
- To assess the current use of big data and artificial intelligence (AI) in the field of rheumatic and musculoskeletal diseases (RMDs).MethodsA systematic literature review was performed in PubMed MEDLINE in November 2018, with key words referring to big data, AI and RMDs. All original reports published in English were analysed. A mirror literature review was also performed outside of RMDs on the same number of articles. The number of data analysed, data sources and statistical methods used (traditional statistics, AI or both) were collected. The analysis compared findings within and beyond the field of RMDs.ResultsOf 567 articles relating to RMDs, 55 met the inclusion criteria and were analysed, as well as 55 articles in other medical fields. The mean number of data points was 746 million (range 2000–5 billion) in RMDs, and 9.1 billion (range 100 000–200 billion) outside of RMDs. Data sources were varied: in RMDs, 26 (47%) were clinical, 8 (15%) biological and 16 (29%) radiological. Both traditional and AI methods were used to analyse big data (respectively, 10 (18%) and 45 (82%) in RMDs and 8 (15%) and 47 (85%) out of RMDs). Machine learning represented 97% of AI methods in RMDs and among these methods, the most represented was artificial neural network (20/44 articles in RMDs).ConclusionsBig data sources and types are varied within the field of RMDs, and methods used to analyse big data were heterogeneous. These findings will inform a European League Against Rheumatism taskforce on big data in RMDs.
|
|
10. |
- Panwisawas, C., et al.
(författare)
-
A Multi-scale Multi-physics Approach to Modelling of Additive Manufacturing in Nickel-based Superalloys
- 2016
-
Ingår i: Superalloys 2016. - : Minerals, Metals & Materials Society. - 9781118996669 ; , s. 1021-1030
-
Konferensbidrag (refereegranskat)abstract
- A multi-scale, multi-physics modelling framework of selective laser melting (SLM) in the nickel-based superalloy IN718 is presented. Representative powder-bed particle distribution is simulated using the measured size distribution from experiment. Thermal fluid dynamics calculations are then used to predict melting behaviour, sub-surface morphology, and porosity development during a single pass scanning of the SLM process. The results suggest that the pores and uneven surface structure are exacerbated by increasing powder layer thicknesses. Predicted porosity volume fraction is up to 12% of the single track when 5 statistical powder distributions are simulated for each powder layer thickness. Processing-induced microstructure is predicted by linking cellular automatons – finite element calculations indicate further that the cooling rate is about 4400 o C/s and grain growth strongly follows the thermal gradient giving rise to a columnar grain morphology if homogeneous nucleation is assumed. Random texture is likely for as-fabricated SLM single pass with approximately 8 Pm and 6 Pm grain size for 20 Pm and 100 Pm powder layer thickness fabrication. Use has been made of the cooling history to predict more detailed microstructure using a γ" precipitation model. With the short time scale of solidification and rapid cooling, it becomes less likely that γ" precipitation will be observed in the condition investigated unless a prolonged hold at temperature is carried out. Future work on extension of the proposed multiscale modelling approach on microstructure predictions in SLM to mechanical properties will be discussed.
|
|