| 1. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 2. |
- Bentham, James, et al.
(författare)
-
A century of trends in adult human height
- 2016
-
Ingår i: eLIFE. - 2050-084X. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.522.7) and 16.5 cm (13.319.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
| 3. |
- Bentham, James, et al.
(författare)
-
A century of trends in adult human height
- 2016
-
Ingår i: eLIFE. - : eLife Sciences Publications Ltd. - 2050-084X. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.5–22.7) and 16.5 cm (13.3– 19.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8– 144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
| 4. |
- Lee, Jae Young, et al.
(författare)
-
Predicted temperature-increase-induced global health burden and its regional variability
- 2019
-
Ingår i: Environment International. - : Elsevier. - 0160-4120 .- 1873-6750. ; 131
-
Tidskriftsartikel (refereegranskat)abstract
- An increase in the global health burden of temperature was projected for 459 locations in 28 countries worldwide under four representative concentration pathway scenarios until 2099. We determined that the amount of temperature increase for each 100 ppm increase in global CO2 concentrations is nearly constant, regardless of climate scenarios. The overall average temperature increase during 2010-2099 is largest in Canada (1.16 °C/100 ppm) and Finland (1.14 °C/100 ppm), while it is smallest in Ireland (0.62 °C/100 ppm) and Argentina (0.63 °C/100 ppm). In addition, for each 1 °C temperature increase, the amount of excess mortality is increased largely in tropical countries such as Vietnam (10.34%p/°C) and the Philippines (8.18%p/°C), while it is decreased in Ireland (-0.92%p/°C) and Australia (-0.32%p/°C). To understand the regional variability in temperature increase and mortality, we performed a regression-based modeling. We observed that the projected temperature increase is highly correlated with daily temperature range at the location and vulnerability to temperature increase is affected by health expenditure, and proportions of obese and elderly population.
|
|
| 5. |
- Lee, Whanhee, et al.
(författare)
-
Mortality burden of diurnal temperature range and its temporal changes : a multi-country study
- 2018
-
Ingår i: Environment International. - : Elsevier. - 0160-4120 .- 1873-6750. ; 110, s. 123-130
-
Tidskriftsartikel (refereegranskat)abstract
- Although diurnal temperature range (DTR) is a key index of climate change, few studies have reported the health burden of DTR and its temporal changes at a multi-country scale. Therefore, we assessed the attributable risk fraction of DTR on mortality and its temporal variations in a multi-country data set. We collected time-series data covering mortality and weather variables from 308 cities in 10 countries from 1972 to 2013. The temporal change in DTR-related mortality was estimated for each city with a time-varying distributed lag model. Estimates for each city were pooled using a multivariate meta-analysis. The results showed that the attributable fraction of total mortality to DTR was 2.5% (95% eCI: 2.3-2.7%) over the entire study period. In all countries, the attributable fraction increased from 2.4% (2.1-2.7%) to 2.7% (2.4-2.9%) between the first and last study years. This study found that DTR has significantly contributed to mortality in all the countries studied, and this attributable fraction has significantly increased over time in the USA, the UK, Spain, and South Korea. Therefore, because the health burden of DTR is not likely to reduce in the near future, countermeasures are needed to alleviate its impact on human health.
|
|
| 6. |
- Moura, Camilla C G, et al.
(författare)
-
Evaluation of human polymorphonuclear behavior on textured titanium and calcium-phosphate coated surfaces
- 2013
-
Ingår i: Biomedical Materials. - : Bibliopolis, Edizioni di Filosofia e Scienze. - 1748-6041 .- 1748-605X. ; 8:3
-
Tidskriftsartikel (refereegranskat)abstract
- Few studies have evaluated the effects of titanium (Ti) surface modifications on polymorphonuclear neutrophils (PMNs). Human PMNs' viability and release of key mediators-such as IL1β, IL6, TNFα, IL12, IL10, IL4, TGFβ1, IL8, IP-10, and Mig-were evaluated on three different Ti surface treatments: (1) machined Ti; (2) alumina-blasted and acid-etched Ti (AB/AE); and (3) calcium phosphate coating of 300-500 nm by ion beam onto the AB/AE Ti surface (CaP). A polystyrene surface was used as a negative control. The PMNs were purified from whole human blood and cultured for 6 h. Cell viability was determined by flow cytometry, and the supernatant was evaluated to determine the levels of cytokines and chemokines. Results showed that the percentage of viable cells was significantly lower on the CaP surface compared to the control (p < 0.05) relative to the other groups. No differences in the levels of IL8, MIG, and IP10 were detected between groups. Significantly higher levels of IL1β (p = 0.046) and TNFα (p = 0.016) were detected for the CaP surfaces compared to AB/AE surface only. The levels of IL4, IL10, and TGFβ1 secreted from the PMNs in the CaP group were significantly lower than in the control and machined groups (p < 0.05) that were statistically comparable to AB/AE. Overall, the addition of a thin CaP coating to the AB/AE Ti surface influenced the secretion profile of pro-inflammatory cytokines due to the higher release of pro-inflammatory cytokines (IL1β and TNFα) on these surfaces.
|
|
| 7. |
- Moura, Camilla G, et al.
(författare)
-
Evaluation of osteogenic cell culture and osteogenic/peripheral blood mononuclear human cell co-culture on modified titanium surfaces
- 2013
-
Ingår i: Biomedical Materials. - : Bibliopolis, Edizioni di Filosofia e Scienze. - 1748-6041 .- 1748-605X. ; 8:3
-
Tidskriftsartikel (refereegranskat)abstract
- This study aimed to determine the effect of a bioactive ceramic coating on titanium in the nanothickness range on human osteogenic cells, peripheral blood mononuclear cells (PBMC) and on osteogenic cells co-cultured with PBMC without exogenous stimuli. Cell viability, proliferation, adhesion, cytokine release (IL1β, TGFβ1, IL10 and IL17) and intracellular stain for osteopontin and alkaline phosphatase were assessed. Morphologic evaluation showed smaller and less spread cell aspects in co-culture relative to osteogenic cell culture. Cell viability, proliferation and adhesion kinetics were differently influenced by surface texture/chemistry in culture versus co-culture. Cytokine release was also influenced by the interaction between mononuclear and osteogenic cells (mediators released by mononuclear cells acted on osteogenic cells and vice versa). In general, 'multi-cell type' interactions played a more remarkable role than the surface roughness or chemistry utilized on the in vitro cellular events related to initial stages of bone formation.
|
|
| 8. |
- Tavares, Julia, et al.
(författare)
-
Basin-wide variation in tree hydraulic safety margins predicts the carbon balance of Amazon forests
- 2023
-
Ingår i: Nature. - : Springer Nature. - 0028-0836 .- 1476-4687. ; 617:7959, s. 111-117
-
Tidskriftsartikel (refereegranskat)abstract
- Tropical forests face increasing climate risk(1,2), yet our ability to predict their response to climate change is limited by poor understanding of their resistance to water stress. Although xylem embolism resistance thresholds (for example, ?(50)) and hydraulic safety margins (for example, HSM50) are important predictors of drought-induced mortality risk(3-5), little is known about how these vary across Earth's largest tropical forest. Here, we present a pan-Amazon, fully standardized hydraulic traits dataset and use it to assess regional variation in drought sensitivity and hydraulic trait ability to predict species distributions and long-term forest biomass accumulation. Parameters ?(50) and HSM50 vary markedly across the Amazon and are related to average long-term rainfall characteristics. Both ?(50) and HSM50 influence the biogeographical distribution of Amazon tree species. However, HSM50 was the only significant predictor of observed decadal-scale changes in forest biomass. Old-growth forests with wide HSM50 are gaining more biomass than are low HSM(50 )forests. We propose that this may be associated with a growth-mortality trade-off whereby trees in forests consisting of fast-growing species take greater hydraulic risks and face greater mortality risk. Moreover, in regions of more pronounced climatic change, we find evidence that forests are losing biomass, suggesting that species in these regions may be operating beyond their hydraulic limits. Continued climate change is likely to further reduce HSM50 in the Amazon(6,7), with strong implications for the Amazon carbon sink.
|
|
| 9. |
- Zambuzzi, Willian F., et al.
(författare)
-
Nanometer Scale Titanium Surface Texturing Are Detected by Signaling Pathways Involving Transient FAK and Src Activations
- 2014
-
Ingår i: PLOS ONE. - : Public Library of Science. - 1932-6203. ; 9:7
-
Tidskriftsartikel (refereegranskat)abstract
- Background: It is known that physico/chemical alterations on biomaterial surfaces have the capability to modulate cellular behavior, affecting early tissue repair. Such surface modifications are aimed to improve early healing response and, clinically, offer the possibility to shorten the time from implant placement to functional loading. Since FAK and Src are intracellular proteins able to predict the quality of osteoblast adhesion, this study evaluated the osteoblast behavior in response to nanometer scale titanium surface texturing by monitoring FAK and Src phosphorylations. Methodology: Four engineered titanium surfaces were used for the study: machined (M), dual acid-etched (DAA), resorbable media microblasted and acid-etched (MBAA), and acid-etch microblasted (AAMB). Surfaces were characterized by scanning electron microscopy, interferometry, atomic force microscopy, x-ray photoelectron spectroscopy and energy dispersive X-ray spectroscopy. Thereafter, those 4 samples were used to evaluate their cytotoxicity and interference on FAK and Src phosphorylations. Both Src and FAK were investigated by using specific antibody against specific phosphorylation sites. Principal Findings: The results showed that both FAK and Src activations were differently modulated as a function of titanium surfaces physico/chemical configuration and protein adsorption. Conclusions: It can be suggested that signaling pathways involving both FAK and Src could provide biomarkers to predict osteoblast adhesion onto different surfaces.
|
|
| 10. |
- Anchieta, Rodolfo B., et al.
(författare)
-
Mechanical Property Assessment of Bone Healing around a Titanium-Zirconium Alloy Dental Implant
- 2014
-
Ingår i: Clinical Implant Dentistry and Related Research. - : John Wiley & Sons. - 1523-0899 .- 1708-8208. ; 16:6, s. 913-919
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundIt has been reported that titanium-zirconium alloy with 13-17% zirconium (TiZr1317) implants show higher biomechanical stability and bone area percentage relative to commercially pure titanium (cpTi) grade 4 fixtures. PurposeThis study aimed to determine whether the higher stability for TiZr1317 implants is associated with higher mechanical properties of remodeling bone in the areas around the implants. Materials and MethodsThis study utilized 36 implants (n=18: TiZr1317, n=18: cpTi), which were placed in the healed ridges of the mandibular premolar and first molar of 12 mini pigs (n=3 implants/animal). After 4 weeks in vivo, the samples were retrieved, and resin-embedded histologic sections of approximately 100m in thickness were prepared. In order to determine the nanomechanical properties, nanoindentation (n=30 tests/specimen) was performed on the bone tissue of the sections under wet conditions with maximum load of 300N (loading rate: 60N/s). ResultsThe mean (standard deviation) elastic modulus (E) and hardness (H) for the TiZr1317 group were 2.73 +/- 0.50GPa and 0.116 +/- 0.017GPa, respectively. For the cpTi group, values were 2.68 +/- 0.51GPa and 0.110 +/- 0.017GPa for E and H, respectively. Although slightly higher mechanical properties values were observed for the TiZr1317 implants relative to the cpTi for both elastic modulus and hardness, these differences were not significant (E=p>0.75; H=p>0.59). ConclusionsThe titanium-zirconium alloy used in this study presented similar degrees of nanomechanical properties to that of the cpTi implants.
|
|
