| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
- Falster, Daniel, et al.
(författare)
-
AusTraits, a curated plant trait database for the Australian flora
- 2021
-
Ingår i: Scientific Data. - : Nature Portfolio. - 2052-4463. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- We introduce the AusTraits database - a compilation of values of plant traits for taxa in the Australian flora (hereafter AusTraits). AusTraits synthesises data on 448 traits across 28,640 taxa from field campaigns, published literature, taxonomic monographs, and individual taxon descriptions. Traits vary in scope from physiological measures of performance (e.g. photosynthetic gas exchange, water-use efficiency) to morphological attributes (e.g. leaf area, seed mass, plant height) which link to aspects of ecological variation. AusTraits contains curated and harmonised individual- and species-level measurements coupled to, where available, contextual information on site properties and experimental conditions. This article provides information on version 3.0.2 of AusTraits which contains data for 997,808 trait-by-taxon combinations. We envision AusTraits as an ongoing collaborative initiative for easily archiving and sharing trait data, which also provides a template for other national or regional initiatives globally to fill persistent gaps in trait knowledge.
|
|
| 3. |
- Janko, Matthew, et al.
(författare)
-
Contemporary Outcomes After Partial Resection of Infected Aortic Grafts
- 2021
-
Ingår i: Annals of Vascular Surgery. - : Elsevier. - 0890-5096 .- 1615-5947. ; 76, s. 202-210
-
Tidskriftsartikel (refereegranskat)abstract
- INTRODUCTION: Aortic graft infection remains a considerable clinical challenge, and it is unclear which variables are associated with adverse outcomes among patients undergoing partial resection.METHODS: A retrospective, multi-institutional study of patients who underwent partial resection of infected aortic grafts from 2002 to 2014 was performed using a standard database. Baseline demographics, comorbidities, operative, and postoperative variables were recorded. The primary outcome was mortality. Descriptive statistics, Kaplan-Meier (KM) survival analysis, and Cox regression analysis were performed.RESULTS: One hundred fourteen patients at 22 medical centers in 6 countries underwent partial resection of an infected aortic graft. Seventy percent were men with median age 70 years. Ninety-seven percent had a history of open aortic bypass graft: 88 (77%) patients had infected aortobifemoral bypass, 18 (16%) had infected aortobiiliac bypass, and 1 (0.8%) had an infected thoracic graft. Infection was diagnosed at a median 4.3 years post-implant. All patients underwent partial resection followed by either extra-anatomic (47%) or in situ (53%) vascular reconstruction. Median follow-up period was 17 months (IQR 1, 50 months). Thirty-day mortality was 17.5%. The KM-estimated median survival from time of partial resection was 3.6 years. There was no significant survival difference between those undergoing in situ reconstruction or extra-anatomic bypass (P = 0.6). During follow up, 72% of repairs remained patent and 11% of patients underwent major amputation. On univariate Cox regression analysis, Candida infection was associated with increased risk of mortality (HR 2.4; P = 0.01) as well as aortoenteric fistula (HR 1.9, P = 0.03). Resection of a single graft limb only to resection of abdominal (graft main body) infection was associated with decreased risk of mortality (HR 0.57, P = 0.04), as well as those with American Society of Anesthesiologists classification less than 3 (HR 0.35, P = 0.04). Multivariate analysis did not reveal any factors significantly associated with mortality. Persistent early infection was noted in 26% of patients within 30 days postoperatively, and 39% of patients were found to have any post-repair infection during the follow-up period. Two patients (1.8%) were found to have a late reinfection without early persistent postoperative infection. Patients with any post-repair infection were older (67 vs. 60 years, P = 0.01) and less likely to have patent repairs during follow up (59% vs. 32%, P = 0.01). Patients with aortoenteric fistula had a higher rate of any post-repair infection (63% vs. 29%, P < 0.01)CONCLUSION: This large multi-center study suggests that patients who have undergone partial resection of infected aortic grafts may be at high risk of death or post-repair infection, especially older patients with abdominal infection not isolated to a single graft limb, or with Candida infection or aortoenteric fistula. Late reinfection correlated strongly with early persistent postoperative infection, raising concern for occult retained infected graft material.
|
|
| 4. |
- Janko, Matthew R., et al.
(författare)
-
In situ bypass and extra-anatomic bypass procedures result in similar survival in patients with secondary aortoenteric fistulas
- 2021
-
Ingår i: Journal of Vascular Surgery. - : Elsevier. - 0741-5214 .- 1097-6809. ; 73:1, s. 210-221.e1
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: The optimal revascularization modality in secondary aortoenteric fistula (SAEF) remains unclear in the literature. The purpose of this investigation was to determine the revascularization approach associated with the lowest morbidity and mortality using real-world data in patients with SAEF. Methods: A retrospective, multi-institutional study of SAEF from 2002 to 2014 was performed using a standardized database. Baseline demographics, comorbidities, and operative and postoperative variables were recorded. The primary outcome was long-term mortality. Descriptive statistics, Kaplan-Meier survival analysis, and univariate and multivariate analyses were performed. Results: During the study period, 182 patients at 34 institutions from 11 countries presented with SAEF (median age, 72 years; 79% male). The initial aortic procedures that resulted in SAEF were 138 surgical grafts (76%) and 42 endografts (23%), with 2 unknown; 102 of the SAEFs (56%) underwent complete excision of infected aortic graft material, followed by in situ (in-line) bypass (ISB), including antibiotic-soaked prosthetic graft (53), autogenous femoral vein (neoaortoiliac surgery; 17), cryopreserved allograft (28), and untreated prosthetic grafts (4). There were 80 patients (44%) who underwent extra-anatomic bypass (EAB) with infected graft excision. Overall median Kaplan-Meier estimated survival was 319 days (interquartile range, 20-2410 days). Stratified by EAB vs ISB, there was no significant difference in Kaplan-Meier estimated survival (P = .82). In comparing EAB vs ISB, EAB patients were older (74 vs 70 years; P = .01), had less operative hemorrhage (1200 mL vs 2000 mL; P = .04), were more likely to initiate dialysis within 30 days postoperatively (15% vs 5%; P = .02), and were less likely to experience aorta-related hemorrhage within 30 days postoperatively (3% aortic stump dehiscence vs 11% anastomotic rupture; P = .03). There were otherwise no significant differences in presentation, comorbidities, and intraoperative or postoperative variables. Multivariable Cox regression showed that the duration of antibiotic use (hazard ratio, 0.92; 95% confidence interval, 0.86-0.98; P = .01) and rifampin use at time of discharge (hazard ratio, 0.20; 95% confidence interval, 0.05-0.86; P = .03) independently decreased mortality. Conclusions: These data suggest that ISB does not offer a survival advantage compared with EAB and does not decrease the risk of postoperative aorta-related hemorrhage. After repair, <50% of SAEF patients survive 10-months. Each week of antibiotic use decreases mortality by 8%. Further study with risk modeling is imperative for this population. (J Vasc Surg 2021;73:210-21.)
|
|
| 5. |
- Aguado, D. S., et al.
(författare)
-
The Fifteenth Data Release of the Sloan Digital Sky Surveys : First Release of MaNGA-derived Quantities, Data Visualization Tools, and Stellar Library
- 2019
-
Ingår i: Astrophysical Journal Supplement Series. - : Institute of Physics Publishing (IOPP). - 0067-0049 .- 1538-4365. ; 240:2
-
Tidskriftsartikel (refereegranskat)abstract
- Twenty years have passed since first light for the Sloan Digital Sky Survey (SDSS). Here, we release data taken by the fourth phase of SDSS (SDSS-IV) across its first three years of operation (2014 July-2017 July). This is the third data release for SDSS-IV, and the 15th from SDSS (Data Release Fifteen; DR15). New data come from MaNGA-we release 4824 data cubes, as well as the first stellar spectra in the MaNGA Stellar Library (MaStar), the first set of survey-supported analysis products (e.g., stellar and gas kinematics, emission-line and other maps) from the MaNGA Data Analysis Pipeline, and a new data visualization and access tool we call "Marvin." The next data release, DR16, will include new data from both APOGEE-2 and eBOSS; those surveys release no new data here, but we document updates and corrections to their data processing pipelines. The release is cumulative; it also includes the most recent reductions and calibrations of all data taken by SDSS since first light. In this paper, we describe the location and format of the data and tools and cite technical references describing how it was obtained and processed. The SDSS website (www.sdss.org) has also been updated, providing links to data downloads, tutorials, and examples of data use. Although SDSS-IV will continue to collect astronomical data until 2020, and will be followed by SDSS-V (2020-2025), we end this paper by describing plans to ensure the sustainability of the SDSS data archive for many years beyond the collection of data.
|
|
| 6. |
- Janko, Matthew R., et al.
(författare)
-
In-situ bypass is associated with superior infection-free survival compared with extra-anatomic bypass for the management of secondary aortic graft infections without enteric involvement
- 2022
-
Ingår i: Journal of Vascular Surgery. - : Elsevier. - 0741-5214 .- 1097-6809. ; 76:2, s. 546-
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: The optimal revascularization modality following complete resection of aortic graft infection (AGI) without enteric involvement remains unclear. The purpose of this investigation is to determine the revascularization approach associated with the lowest morbidity and mortality using real-world data in patients undergoing complete excision of AGI. Methods: A retrospective, multi-institutional study of AGI from 2002 to 2014 was performed using a standardized database. Baseline demographics, comorbidities, and perioperative variables were recorded. The primary outcome was infection-free survival. Descriptive statistics, Kaplan-Meier survival analysis, and univariate and multivariable analyses were performed. Results: A total of 241 patients at 34 institutions from seven countries presented with AGI during the study period (median age, 68 years; 75% male). The initial aortic procedures that resulted in AGI were 172 surgical grafts (71%), 66 endografts (27%), and three unknown (2%). Of the patients, 172 (71%) underwent complete excision of infected aortic graft material followed by in situ (in-line) bypass (ISB), including antibiotic-treated prosthetic graft (35%), autogenous femoral vein (neo-aortoiliac surgery) (24%), and cryopreserved allograft (41%). Sixty-nine patients (29%) underwent extra-anatomic bypass (EAB). Overall median Kaplan-Meier estimated survival was 5.8 years. Perioperative mortality was 16%. When stratified by ISB vs EAB, there was a significant difference in Kaplan-Meier estimated infection-free survival (2910 days; interquartile range, 391-3771 days vs 180 days; interquartile range, 27-3750 days; P <.001). There were otherwise no significant differences in presentation, comorbidities, or perioperative variables. Multivariable Cox regression showed lower infection-free survival among patients with EAB (hazard ratio [HR], 2.4; 95% confidence interval [CI], 1.6-3.6; P <.001), polymicrobial infection (HR, 2.2; 95% CI, 1.4-3.5; P = .001), methicillin-resistant Staphylococcus aureus infection (HR, 1.7; 95% CI, 1.1-2.7; P = .02), as well as the protective effect of omental/muscle flap coverage (HR, 0.59; 95% CI, 0.37-0.92; P = .02). Conclusions: After complete resection of AGI, perioperative mortality is 16% and median overall survival is 5.8 years. EAB is associated with nearly a two and one-half-fold higher reinfection/mortality compared with ISB. Omental and/or muscle flap coverage of the repair appear protective.
|
|
| 7. |
- Watts, Nick, et al.
(författare)
-
The 2020 report of The Lancet Countdown on health and climate change : responding to converging crises
- 2021
-
Ingår i: The Lancet. - : Elsevier. - 0140-6736 .- 1474-547X. ; 397:10269, s. 129-170
-
Forskningsöversikt (refereegranskat)abstract
- The Lancet Countdown is an international collaboration established to provide an independent, global monitoring system dedicated to tracking the emerging health profile of the changing climate.The 2020 report presents 43 indicators across five sections: climate change impacts, exposures, and vulnerabilities; adaptation, planning, and resilience for health; mitigation actions and health co-benefits; economics and finance; and public and political engagement. This report represents the findings and consensus of the 35 leading academic institutions and UN agencies that make up The Lancet Countdown, and draws on the expertise of climate scientists, geographers, engineers, experts in energy, food, and transport, economists, social, and political scientists, data scientists, public health professionals, and doctors.
|
|
| 8. |
- Kanai, M, et al.
(författare)
-
- 2023
-
swepub:Mat__t
|
|
| 9. |
- Andrews, Harry Arthur, et al.
(författare)
-
Novel tools and observables for jet physics in heavy-ion collisions
- 2020
-
Ingår i: Journal of Physics G: Nuclear and Particle Physics. - : IOP Publishing. - 0954-3899 .- 1361-6471. ; 47:6
-
Tidskriftsartikel (refereegranskat)abstract
- Studies of fully-reconstructed jets in heavy-ion collisions aim at extracting thermodynamical and transport properties of hot and dense QCD matter. Recently, a plethora of new jet substructure observables have been theoretically and experimentally developed that provide novel precise insights on the modifications of the parton radiation pattern induced by a QCD medium. This report, summarizing the main lines of discussion at the 5th Heavy Ion Jet Workshop and CERN TH institute 'Novel tools and observables for jet physics in heavy-ion collisions' in 2017, presents a first attempt at outlining a strategy for isolating and identifying the relevant physical processes that are responsible for the observed medium-induced jet modifications. These studies combine theory insights, based on the Lund parton splitting map, with sophisticated jet reconstruction techniques, including grooming and background subtraction algorithms.
|
|
| 10. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
