SwePub
Tyck till om SwePub Sök här!
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Concepción M) "

Sökning: WFRF:(Concepción M)

  • Resultat 1-10 av 29
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Axfors, Cathrine, et al. (författare)
  • Association between convalescent plasma treatment and mortality in COVID-19 : a collaborative systematic review and meta-analysis of randomized clinical trials
  • 2021
  • Ingår i: BMC Infectious Diseases. - : BioMed Central (BMC). - 1471-2334. ; 21:1
  • Forskningsöversikt (refereegranskat)abstract
    • Background: Convalescent plasma has been widely used to treat COVID-19 and is under investigation in numerous randomized clinical trials, but results are publicly available only for a small number of trials. The objective of this study was to assess the benefits of convalescent plasma treatment compared to placebo or no treatment and all-cause mortality in patients with COVID-19, using data from all available randomized clinical trials, including unpublished and ongoing trials (Open Science Framework, ). Methods: In this collaborative systematic review and meta-analysis, clinical trial registries (ClinicalTrials.gov, WHO International Clinical Trials Registry Platform), the Cochrane COVID-19 register, the LOVE database, and PubMed were searched until April 8, 2021. Investigators of trials registered by March 1, 2021, without published results were contacted via email. Eligible were ongoing, discontinued and completed randomized clinical trials that compared convalescent plasma with placebo or no treatment in COVID-19 patients, regardless of setting or treatment schedule. Aggregated mortality data were extracted from publications or provided by investigators of unpublished trials and combined using the Hartung-Knapp-Sidik-Jonkman random effects model. We investigated the contribution of unpublished trials to the overall evidence. Results: A total of 16,477 patients were included in 33 trials (20 unpublished with 3190 patients, 13 published with 13,287 patients). 32 trials enrolled only hospitalized patients (including 3 with only intensive care unit patients). Risk of bias was low for 29/33 trials. Of 8495 patients who received convalescent plasma, 1997 died (23%), and of 7982 control patients, 1952 died (24%). The combined risk ratio for all-cause mortality was 0.97 (95% confidence interval: 0.92; 1.02) with between-study heterogeneity not beyond chance (I-2 = 0%). The RECOVERY trial had 69.8% and the unpublished evidence 25.3% of the weight in the meta-analysis. Conclusions: Convalescent plasma treatment of patients with COVID-19 did not reduce all-cause mortality. These results provide strong evidence that convalescent plasma treatment for patients with COVID-19 should not be used outside of randomized trials. Evidence synthesis from collaborations among trial investigators can inform both evidence generation and evidence application in patient care.
  •  
2.
  •  
3.
  • Fernández-Pozo, Noé, et al. (författare)
  • EuroPineDB : a high-coverage web database for maritime pine transcriptome
  • 2011
  • Ingår i: BMC Genomics. - : Springer Science and Business Media LLC. - 1471-2164. ; 12, s. 366-
  • Tidskriftsartikel (refereegranskat)abstract
    • BACKGROUND: Pinus pinaster is an economically and ecologically important species that is becoming a woody gymnosperm model. Its enormous genome size makes whole-genome sequencing approaches are hard to apply. Therefore, the expressed portion of the genome has to be characterised and the results and annotations have to be stored in dedicated databases. DESCRIPTION: EuroPineDB is the largest sequence collection available for a single pine species, Pinus pinaster (maritime pine), since it comprises 951 641 raw sequence reads obtained from non-normalised cDNA libraries and high-throughput sequencing from adult (xylem, phloem, roots, stem, needles, cones, strobili) and embryonic (germinated embryos, buds, callus) maritime pine tissues. Using open-source tools, sequences were optimally pre-processed, assembled, and extensively annotated (GO, EC and KEGG terms, descriptions, SNPs, SSRs, ORFs and InterPro codes). As a result, a 10.5× P. pinaster genome was covered and assembled in 55 322 UniGenes. A total of 32 919 (59.5%) of P. pinaster UniGenes were annotated with at least one description, revealing at least 18 466 different genes. The complete database, which is designed to be scalable, maintainable, and expandable, is freely available at: http://www.scbi.uma.es/pindb/. It can be retrieved by gene libraries, pine species, annotations, UniGenes and microarrays (i.e., the sequences are distributed in two-colour microarrays; this is the only conifer database that provides this information) and will be periodically updated. Small assemblies can be viewed using a dedicated visualisation tool that connects them with SNPs. Any sequence or annotation set shown on-screen can be downloaded. Retrieval mechanisms for sequences and gene annotations are provided. CONCLUSIONS: The EuroPineDB with its integrated information can be used to reveal new knowledge, offers an easy-to-use collection of information to directly support experimental work (including microarray hybridisation), and provides deeper knowledge on the maritime pine transcriptome.
  •  
4.
  • Backes, Claudia, et al. (författare)
  • Production and processing of graphene and related materials
  • 2020
  • Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
  • Tidskriftsartikel (refereegranskat)abstract
    • We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
  •  
5.
  • Miles, Elizabeth A, et al. (författare)
  • The Salmon in Pregnancy Study : study design, subject characteristics, maternal fish and marine n-3 fatty acid intake, and marine n-3 fatty acid status in maternal and umbilical cord blood
  • 2011
  • Ingår i: American Journal of Clinical Nutrition. - : Elsevier BV. - 0002-9165 .- 1938-3207. ; 94:6, s. 1986S-1992S
  • Tidskriftsartikel (refereegranskat)abstract
    • BACKGROUND: Oily fish provides marine n-3 (omega-3) fatty acids that are considered to be important in the growth, development, and health of the fetus and newborn infant. OBJECTIVES: The objectives were to increase salmon consumption among pregnant women and to determine the effect on maternal and umbilical cord plasma marine n-3 fatty acid content. DESIGN: Women (n = 123) with low habitual consumption of oily fish were randomly assigned to continue their habitual diet or were provided with 2 portions of farmed salmon/wk to include in their diet from week 20 of pregnancy until delivery. RESULTS: Median weekly consumption frequency of study salmon in the salmon group was 1.94 portions, and total fish consumption frequency was 2.11 portions/wk in the salmon group and 0.47 portions/wk in the control group (P < 0.001). Intakes of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) from the diet, from seafood, and from oily fish were higher in the salmon group (all P < 0.001). Percentages of EPA and DHA in plasma phosphatidylcholine decreased during pregnancy in the control group (P for trend = 0.029 and 0.008, respectively), whereas they increased in the salmon group (P for trend for both < 0.001). EPA and DHA percentages were higher in maternal plasma phosphatidylcholine at weeks 34 and 38 of pregnancy and in umbilical cord plasma phosphatidylcholine in the salmon group (P < 0.001 for all). CONCLUSION: If pregnant women, who do not regularly eat oily fish, eat 2 portions of salmon/wk, they will increase their intake of EPA and DHA, achieving the recommended minimum intake; and they will increase their and their fetus' status of EPA and DHA. This trial was registered at clinicaltrials.gov as NCT00801502.
  •  
6.
  • Villar, Jesus, et al. (författare)
  • A Quantile Analysis of Plateau and Driving Pressures : Effects on Mortality in Patients With Acute Respiratory Distress Syndrome Receiving Lung-Protective Ventilation
  • 2017
  • Ingår i: Critical Care Medicine. - 0090-3493 .- 1530-0293. ; 45:5, s. 843-850
  • Tidskriftsartikel (refereegranskat)abstract
    • Objectives: The driving pressure (plateau pressure minus positive end-expiratory pressure) has been suggested as the major determinant for the beneficial effects of lung-protective ventilation. We tested whether driving pressure was superior to the variables that define it in predicting outcome in patients with acute respiratory distress syndrome.Design: A secondary analysis of existing data from previously reported observational studies.Setting: A network of ICUs.Patients: We studied 778 patients with moderate to severe acute respiratory distress syndrome.Interventions: None.Measurements and Main Results: We assessed the risk of hospital death based on quantiles of tidal volume, positive end-expiratory pressure, plateau pressure, and driving pressure evaluated at 24 hours after acute respiratory distress syndrome diagnosis while ventilated with standardized lung-protective ventilation. We derived our model using individual data from 478 acute respiratory distress syndrome patients and assessed its replicability in a separate cohort of 300 acute respiratory distress syndrome patients. Tidal volume and positive end-expiratory pressure had no impact on mortality. We identified a plateau pressure cut-off value of 29 cm H2O, above which an ordinal increment was accompanied by an increment of risk of death. We identified a driving pressure cut-off value of 19 cm H2O where an ordinal increment was accompanied by an increment of risk of death. When we cross tabulated patients with plateau pressure less than 30 and plateau pressure greater than or equal to 30 with those with driving pressure less than 19 and driving pressure greater than or equal to 19, plateau pressure provided a slightly better prediction of outcome than driving pressure in both the derivation and validation cohorts (p < 0.0000001).Conclusions: Plateau pressure was slightly better than driving pressure in predicting hospital death in patients managed with lung-protective ventilation evaluated on standardized ventilator settings 24 hours after acute respiratory distress syndrome onset.
  •  
7.
  • Lassale, Camille, et al. (författare)
  • Separate and combined associations of obesity and metabolic health with coronary heart disease : a pan-European case-cohort analysis
  • 2018
  • Ingår i: European Heart Journal. - : Oxford University Press. - 0195-668X .- 1522-9645. ; 39:5, s. 397-406
  • Tidskriftsartikel (refereegranskat)abstract
    • Aims: The hypothesis of 'metabolically healthy obesity' implies that, in the absence of metabolic dysfunction, individuals with excess adiposity are not at greater cardiovascular risk. We tested this hypothesis in a large pan-European prospective study.Methods and results: We conducted a case-cohort analysis in the 520 000-person European Prospective Investigation into Cancer and Nutrition study ('EPIC-CVD'). During a median follow-up of 12.2 years, we recorded 7637 incident coronary heart disease (CHD) cases. Using cut-offs recommended by guidelines, we defined obesity and overweight using body mass index (BMI), and metabolic dysfunction ('unhealthy') as ≥ 3 of elevated blood pressure, hypertriglyceridaemia, low HDL-cholesterol, hyperglycaemia, and elevated waist circumference. We calculated hazard ratios (HRs) and 95% confidence intervals (95% CI) within each country using Prentice-weighted Cox proportional hazard regressions, accounting for age, sex, centre, education, smoking, diet, and physical activity. Compared with metabolically healthy normal weight people (reference), HRs were 2.15 (95% CI: 1.79; 2.57) for unhealthy normal weight, 2.33 (1.97; 2.76) for unhealthy overweight, and 2.54 (2.21; 2.92) for unhealthy obese people. Compared with the reference group, HRs were 1.26 (1.14; 1.40) and 1.28 (1.03; 1.58) for metabolically healthy overweight and obese people, respectively. These results were robust to various sensitivity analyses.Conclusion: Irrespective of BMI, metabolically unhealthy individuals had higher CHD risk than their healthy counterparts. Conversely, irrespective of metabolic health, overweight and obese people had higher CHD risk than lean people. These findings challenge the concept of 'metabolically healthy obesity', encouraging population-wide strategies to tackle obesity.
  •  
8.
  • Parsons, Michael T, et al. (författare)
  • Large scale multifactorial likelihood quantitative analysis of BRCA1 and BRCA2 variants : An ENIGMA resource to support clinical variant classification
  • 2019
  • Ingår i: Human Mutation. - : Hindawi Limited. - 1059-7794 .- 1098-1004. ; , s. 1557-1578
  • Tidskriftsartikel (refereegranskat)abstract
    • The multifactorial likelihood analysis method has demonstrated utility for quantitative assessment of variant pathogenicity for multiple cancer syndrome genes. Independent data types currently incorporated in the model for assessing BRCA1 and BRCA2 variants include clinically calibrated prior probability of pathogenicity based on variant location and bioinformatic prediction of variant effect, co-segregation, family cancer history profile, co-occurrence with a pathogenic variant in the same gene, breast tumor pathology, and case-control information. Research and clinical data for multifactorial likelihood analysis were collated for 1395 BRCA1/2 predominantly intronic and missense variants, enabling classification based on posterior probability of pathogenicity for 734 variants: 447 variants were classified as (likely) benign, and 94 as (likely) pathogenic; 248 classifications were new or considerably altered relative to ClinVar submissions. Classifications were compared to information not yet included in the likelihood model, and evidence strengths aligned to those recommended for ACMG/AMP classification codes. Altered mRNA splicing or function relative to known non-pathogenic variant controls were moderately to strongly predictive of variant pathogenicity. Variant absence in population datasets provided supporting evidence for variant pathogenicity. These findings have direct relevance for BRCA1 and BRCA2 variant evaluation, and justify the need for gene-specific calibration of evidence types used for variant classification. This article is protected by copyright. All rights reserved.
  •  
9.
  • Wang, Fang, et al. (författare)
  • Emerging contaminants: A One Health perspective
  • 2024
  • Ingår i: Innovation. - 2666-6758. ; 5
  • Forskningsöversikt (refereegranskat)abstract
    • Environmental pollution is escalating due to rapid global development that often prioritizes human needs over planetary health. Despite global efforts to mitigate legacy pollutants, the continuous introduction of new substances remains a major threat to both people and the planet. In response, global initiatives are focusing on risk assessment and regulation of emerging contaminants, as demonstrated by the ongoing efforts to establish the UN's Intergovernmental Science-Policy Panel on Chemicals, Waste, and Pollution Prevention. This review identifies the sources and impacts of emerging contaminants on planetary health, emphasizing the importance of adopting a One Health approach. Strategies for monitoring and addressing these pollutants are discussed, underscoring the need for robust and socially equitable environmental policies at both regional and international levels. Urgent actions are needed to transition toward sustainable pollution management practices to safeguard our planet for future generations.
  •  
10.
  • Ferwerda, Bart, et al. (författare)
  • Functional and genetic evidence that the Mal/TIRAP allele variant 180L has been selected by providing protection against septic shock.
  • 2009
  • Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 106:25, s. 10272-10277
  • Tidskriftsartikel (refereegranskat)abstract
    • Adequate responses by our innate immune system toward invading pathogens were of vital importance for surviving infections, especially before the antibiotic era. Recently, a polymorphism in Mal (Ser180Leu, TIRAP rs8177374), an important adaptor protein downstream of the Toll-like receptor (TLR) 2 and 4 pathways, has been described to provide protection against a broad range of infectious pathogens. We assessed the functional effects of this polymorphism in human experimental endotoxemia, and we demonstrate that individuals bearing the TIRAP 180L allele display an increased, innate immune response to TLR4 and TLR2 ligands, but not to TLR9 stimulation. This phenotype has been related to an increased resistance to infection. However, an overshoot in the release of proinflammatory cytokines by TIRAP 180L homozygous individuals suggests a scenario of balanced evolution. We have also investigated the worldwide distribution of the Ser180Leu polymorphism in 14 populations around the globe to correlate the genetic makeup of TIRAP with the local infectious pressures. Based on the immunological, clinical, and genetic data, we propose that this mutation might have been selected in West Eurasia during the early settlement of this region after the out-of-Africa migration of modern Homo sapiens. This combination of functional and genetic data provides unique insights to our understanding of the pathogenesis of sepsis.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 29
Typ av publikation
tidskriftsartikel (24)
konferensbidrag (2)
forskningsöversikt (2)
bokkapitel (1)
Typ av innehåll
refereegranskat (29)
Författare/redaktör
Tjønneland, Anne (3)
Ávila, Concepción (3)
Gil, Ángel (3)
Engström, Gunnar (2)
Skeie, Guri (2)
Overvad, Kim (2)
visa fler...
Kaaks, Rudolf (2)
Boeing, Heiner (2)
Trichopoulou, Antoni ... (2)
Masala, Giovanna (2)
Tumino, Rosario (2)
Sacerdote, Carlotta (2)
Riboli, Elio (2)
Alarcón-Riquelme, Ma ... (2)
Suarez-Sipmann, Fern ... (2)
Melander, Olle (2)
Weiderpass, Elisabet ... (2)
Panico, Salvatore (2)
Ferrari, Pietro (2)
Grioni, Sara (2)
Delgado-Vega, Angéli ... (2)
Benetou, Vassiliki (2)
Wennberg, Patrik (2)
Troye-Blomberg, Mari ... (2)
Colorado-Yohar, Sand ... (2)
Basu, Samar (2)
Dolo, Amagana (2)
van der Schouw, Yvon ... (2)
Verschuren, W. M. Mo ... (2)
Vasson, Marie-Paule (2)
Rossary, Adrien (2)
Cánovas, Francisco, ... (2)
Moons, Karel G M (2)
Calder, Philip C (2)
Maiga, Boubacar (2)
Sauerwein, Robert (2)
Godfrey, Keith M (2)
Doumbo, Ogobara (2)
Blanch, Lluis (2)
Giamarellos-Bourboul ... (2)
Canales, Javier (2)
Villar, Jesus (2)
Danesh, John (2)
Netea, Mihai G. (2)
Ferwerda, Bart (2)
Alonso, Santos (2)
McCall, Matthew B B (2)
Mouktaroudi, Maria (2)
Izagirre, Neskuts (2)
Syafruddin, Din (2)
visa färre...
Lärosäte
Uppsala universitet (9)
Lunds universitet (8)
Karolinska Institutet (5)
Umeå universitet (4)
Kungliga Tekniska Högskolan (3)
Linköpings universitet (3)
visa fler...
Göteborgs universitet (2)
Stockholms universitet (2)
Chalmers tekniska högskola (2)
Högskolan i Skövde (1)
Linnéuniversitetet (1)
Sveriges Lantbruksuniversitet (1)
visa färre...
Språk
Engelska (28)
Spanska (1)
Forskningsämne (UKÄ/SCB)
Medicin och hälsovetenskap (16)
Naturvetenskap (6)
Teknik (2)
Lantbruksvetenskap (2)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy