| 1. |
- Labit, B., et al.
(författare)
-
Dependence on plasma shape and plasma fueling for small edge-localized mode regimes in TCV and ASDEX Upgrade
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:8
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019 Institute of Physics Publishing. All rights reserved. Within the EUROfusion MST1 work package, a series of experiments has been conducted on AUG and TCV devices to disentangle the role of plasma fueling and plasma shape for the onset of small ELM regimes. On both devices, small ELM regimes with high confinement are achieved if and only if two conditions are fulfilled at the same time. Firstly, the plasma density at the separatrix must be large enough (ne,sep/nG ∼ 0.3), leading to a pressure profile flattening at the separatrix, which stabilizes type-I ELMs. Secondly, the magnetic configuration has to be close to a double null (DN), leading to a reduction of the magnetic shear in the extreme vicinity of the separatrix. As a consequence, its stabilizing effect on ballooning modes is weakened.
|
|
| 2. |
- Zuin, M., et al.
(författare)
-
Overview of the RFX-mod fusion science activity
- 2017
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Tidskriftsartikel (refereegranskat)abstract
- This paper reports the main recent results of the RFX-mod fusion science activity. The RFX-mod device is characterized by a unique flexibility in terms of accessible magnetic configurations. Axisymmetric and helically shaped reversed-field pinch equilibria have been studied, along with tokamak plasmas in a wide range of q(a) regimes (spanning from 4 down to 1.2 values). The full range of magnetic configurations in between the two, the so-called ultra-low q ones, has been explored, with the aim of studying specific physical issues common to all equilibria, such as, for example, the density limit phenomenon. The powerful RFX-mod feedback control system has been exploited for MHD control, which allowed us to extend the range of experimental parameters, as well as to induce specific magnetic perturbations for the study of 3D effects. In particular, transport, edge and isotope effects in 3D equilibria have been investigated, along with runaway mitigations through induced magnetic perturbations. The first transitions to an improved confinement scenario in circular and D-shaped tokamak plasmas have been obtained thanks to an active modification of the edge electric field through a polarized electrode. The experiments are supported by intense modeling with 3D MHD, gyrokinetic, guiding center and transport codes. Proposed modifications to the RFX-mod device, which will enable further contributions to the solution of key issues in the roadmap to ITER and DEMO, are also briefly presented.
|
|
| 3. |
- Coda, S., et al.
(författare)
-
Physics research on the TCV tokamak facility: From conventional to alternative scenarios and beyond
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Tidskriftsartikel (refereegranskat)abstract
- The research program of the TCV tokamak ranges from conventional to advanced-tokamak scenarios and alternative divertor configurations, to exploratory plasmas driven by theoretical insight, exploiting the device's unique shaping capabilities. Disruption avoidance by real-time locked mode prevention or unlocking with electron-cyclotron resonance heating (ECRH) was thoroughly documented, using magnetic and radiation triggers. Runaway generation with high-Z noble-gas injection and runaway dissipation by subsequent Ne or Ar injection were studied for model validation. The new 1 MW neutral beam injector has expanded the parameter range, now encompassing ELMy H-modes in an ITER-like shape and nearly non-inductive H-mode discharges sustained by electron cyclotron and neutral beam current drive. In the H-mode, the pedestal pressure increases modestly with nitrogen seeding while fueling moves the density pedestal outwards, but the plasma stored energy is largely uncorrelated to either seeding or fueling. High fueling at high triangularity is key to accessing the attractive small edge-localized mode (type-II) regime. Turbulence is reduced in the core at negative triangularity, consistent with increased confinement and in accord with global gyrokinetic simulations. The geodesic acoustic mode, possibly coupled with avalanche events, has been linked with particle flow to the wall in diverted plasmas. Detachment, scrape-off layer transport, and turbulence were studied in L- and H-modes in both standard and alternative configurations (snowflake, super-X, and beyond). The detachment process is caused by power 'starvation' reducing the ionization source, with volume recombination playing only a minor role. Partial detachment in the H-mode is obtained with impurity seeding and has shown little dependence on flux expansion in standard single-null geometry. In the attached L-mode phase, increasing the outer connection length reduces the in-out heat-flow asymmetry. A doublet plasma, featuring an internal X-point, was achieved successfully, and a transport barrier was observed in the mantle just outside the internal separatrix. In the near future variable-configuration baffles and possibly divertor pumping will be introduced to investigate the effect of divertor closure on exhaust and performance, and 3.5 MW ECRH and 1 MW neutral beam injection heating will be added.
|
|
| 4. |
- Chellaï, O., et al.
(författare)
-
Millimeter-wave beam scattering and induced broadening by plasma turbulence in the TCV tokamak
- 2021
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 61:6
-
Tidskriftsartikel (refereegranskat)abstract
- The scattering of millimeter-wave beams from electron density fluctuations and the associated beam broadening are experimentally demonstrated. Using a dedicated setup, instantaneous deflection and (de-)focusing of the beam due to density blobs on the beam path are shown to agree with full-wave simulations. The detected time-averaged wave power transmitted through the turbulent plasma is reproduced by the radiative-transfer model implemented in the WKBeam code, which predicts a ∼50% turbulence-induced broadening of the beam cross-section. The role of core turbulence for the considered geometry is highlighted.
|
|
| 5. |
- Hammerle, C. H. F., et al.
(författare)
-
Biomechanical aspects: Summary and consensus statements of group 4. The 5(th) EAO Consensus Conference 2018
- 2018
-
Ingår i: Clinical Oral Implants Research. - : Wiley. - 0905-7161. ; 29, s. 326-331
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: The aim of the present publication was to report on the EAO Workshop group-4 discussions and consensus statements on the five reviews previously prepared. These reviews provided the scientific evidence on the effect of crown-to-implant ratio, on reconstructions with cantilevers in fully and partially edentulous patients, on biological and technical complications of tilted in comparison with straight implants, and on the effects of osseointegrated implants functioning in a residual dentition. Material and Methods: The group discussed, evaluated, corrected where deemed appropriate, and made recommendations to the authors regarding the following five reviews submitted: (a) Is there an effect of crown-to-implant ratio on implant treatment outcomes?; (b) Implant-supported cantilevered fixed dental rehabilitations in fully edentulous patients; (c) and in partially edentulous patients; (d) Biological and technical complications of tilted implants in comparison with straight implants supporting fixed dental prostheses; (e) What are the adverse effects of osseointegrated implants functioning among natural teeth of a residual dentition? Based on the five manuscripts and the discussion among the group as well as the plenum members, the major findings were summarized, consensus statements were formulated, clinical recommendations were proposed, and areas of future research were identified. Results: Crown-to-implant ratios ranging from 0.9 to 2.2 did not influence the occurrence of biological or technical complications also in single-tooth restorations. Reconstructions with cantilevers for the rehabilitation of fully and partially edentulous jaws showed high implant and reconstruction survival rates. In contrast, the rate of complications-in particular associated with veneering material-was high during the observation period of 5-10 years. The data reported were primarily derived from studies with high risk of bias. The data for single-implant reconstructions were small. There was no evidence that distally tilted implants were associated with higher failure rates and increased amounts of marginal bone loss. The data supporting these findings, however, were at high risk of bias and frequently incompletely reported. Frequent positional changes occurred between the natural teeth and the implant-supported restorations. These changes were more pronounced in younger individuals, and even though they were reduced with age, they still occurred in adult patients. Even though these changes were frequent, potential implications for the patient are unclear. Conclusions: The use of single-tooth restorations with crown-to-implant ratio in between 0.9 and 2.2 may be considered a viable treatment option. Multiunit reconstructions with cantilevers are a viable treatment option in fully and partially edentulous patients. Clinicians and patients should be aware, however, that complications are frequent and primarily related to resin material used for veneering. There is some evidence that tilting an implant does affect stability of the implant and the surrounding bone. Treatment options to tilted implants should carefully be considered, as the effect on soft tissues and on prosthesis behavior is poorly reported for tilted implants. Positional changes in the dentition in relation to implant-supported restorations occur frequently. The patient should be informed about the possible need for a treatment related to these changes in the long term.
|
|
| 6. |
- Jepsen, S., et al.
(författare)
-
Regeneration of alveolar ridge defects. Consensus report of group 4 of the 15th European Workshop on Periodontology on Bone Regeneration
- 2019
-
Ingår i: Journal of Clinical Periodontology. - : Wiley. - 0303-6979 .- 1600-051X. ; 46, s. 277-286
-
Tidskriftsartikel (refereegranskat)abstract
- Background and Aims Bone augmentation procedures to enable dental implant placement are frequently performed. The remit of this working group was to evaluate the current evidence on the efficacy of regenerative measures for the reconstruction of alveolar ridge defects. Material and Methods The discussions were based on four systematic reviews focusing on lateral bone augmentation with implant placement at a later stage, vertical bone augmentation, reconstructive treatment of peri-implantitis associated defects, and long-term results of lateral window sinus augmentation procedures. Results A substantial body of evidence supports lateral bone augmentation prior to implant placement as a predictable procedure in order to gain sufficient ridge width for implant placement. Also, vertical ridge augmentation procedures were in many studies shown to be effective in treating deficient alveolar ridges to allow for dental implant placement. However, for both procedures the rate of associated complications was high. The adjunctive benefit of reconstructive measures for the treatment of peri-implantitis-related bone defects has only been assessed in a few RCTs. Meta-analyses demonstrated a benefit with regard to radiographic bone gain but not for clinical outcomes. Lateral window sinus floor augmentation was shown to be a reliable procedure in the long term for the partially and fully edentulous maxilla. Conclusions The evaluated bone augmentation procedures were proven to be effective for the reconstruction of alveolar ridge defects. However, some procedures are demanding and bear a higher risk for post-operative complications.
|
|
| 7. |
- Jepsen, S, et al.
(författare)
-
Regenration of alveolar ridge defects : Consensus report of group 4 of the 15th European Workshop on Periodontology on Bone Regeneration
- 2019
-
Ingår i: Journal of Clinical Periodontology. - 0303-6979 .- 1600-051X. ; 46, s. 277-286
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND AND AIMS: Bone augmentation procedures to enable dental implant placement are frequently performed. The remit of this working group was to evaluate the current evidence on the efficacy of regenerative measures for the reconstruction of alveolar ridge defects.MATERIAL AND METHODS: The discussions were based on four systematic reviews focusing on lateral bone augmentation with implant placement at a later stage, vertical bone augmentation, reconstructive treatment of peri-implantitis associated defects, and long-term results of lateral window sinus augmentation procedures.RESULTS: A substantial body of evidence supports lateral bone augmentation prior to implant placement as a predictable procedure in order to gain sufficient ridge width for implant placement. Also, vertical ridge augmentation procedures were in many studies shown to be effective in treating deficient alveolar ridges to allow for dental implant placement. However, for both procedures the rate of associated complications was high. The adjunctive benefit of reconstructive measures for the treatment of peri-implantitis-related bone defects has only been assessed in a few RCTs. Meta-analyses demonstrated a benefit with regard to radiographic bone gain but not for clinical outcomes. Lateral window sinus floor augmentation was shown to be a reliable procedure in the long-term for the partially and fully edentulous maxilla.CONCLUSIONS: The evaluated bone augmentation procedures were proven to be effective for the reconstruction of alveolar ridge defects. However, some procedures are demanding and bear a higher risk for postoperative complications. This article is protected by copyright. All rights reserved.
|
|
| 8. |
|
|
