| 1. |
- Abelev, Betty, et al.
(författare)
-
Long-range angular correlations on the near and away side in p-Pb collisions at root S-NN=5.02 TeV
- 2013
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 719:1-3, s. 29-41
-
Tidskriftsartikel (refereegranskat)abstract
- Angular correlations between charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV for transverse momentum ranges within 0.5 < P-T,P-assoc < P-T,P-trig < 4 GeV/c. The correlations are measured over two units of pseudorapidity and full azimuthal angle in different intervals of event multiplicity, and expressed as associated yield per trigger particle. Two long-range ridge-like structures, one on the near side and one on the away side, are observed when the per-trigger yield obtained in low-multiplicity events is subtracted from the one in high-multiplicity events. The excess on the near-side is qualitatively similar to that recently reported by the CMS Collaboration, while the excess on the away-side is reported for the first time. The two-ridge structure projected onto azimuthal angle is quantified with the second and third Fourier coefficients as well as by near-side and away-side yields and widths. The yields on the near side and on the away side are equal within the uncertainties for all studied event multiplicity and p(T) bins, and the widths show no significant evolution with event multiplicity or p(T). These findings suggest that the near-side ridge is accompanied by an essentially identical away-side ridge. (c) 2013 CERN. Published by Elsevier B.V. All rights reserved.
|
|
| 2. |
- Abelev, Betty, et al.
(författare)
-
Measurement of prompt J/psi and beauty hadron production cross sections at mid-rapidity in pp collisions at root s=7 TeV
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :11
-
Tidskriftsartikel (refereegranskat)abstract
- The ALICE experiment at the LHC has studied J/psi production at mid-rapidity in pp collisions at root s = 7 TeV through its electron pair decay on a data sample corresponding to an integrated luminosity L-int = 5.6 nb(-1). The fraction of J/psi from the decay of long-lived beauty hadrons was determined for J/psi candidates with transverse momentum p(t) > 1,3 GeV/c and rapidity vertical bar y vertical bar < 0.9. The cross section for prompt J/psi mesons, i.e. directly produced J/psi and prompt decays of heavier charmonium states such as the psi(2S) and chi(c) resonances, is sigma(prompt J/psi) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 8.3 +/- 0.8(stat.) +/- 1.1 (syst.)(-1.4)(+1.5) (syst. pol.) mu b. The cross section for the production of b-hadrons decaying to J/psi with p(t) > 1.3 GeV/c and vertical bar y vertical bar < 0.9 is a sigma(J/psi <- hB) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 1.46 +/- 0.38 (stat.)(-0.32)(+0.26) (syst.) mu b. The results are compared to QCD model predictions. The shape of the p(t) and y distributions of b-quarks predicted by perturbative QCD model calculations are used to extrapolate the measured cross section to derive the b (b) over bar pair total cross section and d sigma/dy at mid-rapidity.
|
|
| 3. |
- Abelev, Betty, et al.
(författare)
-
Underlying Event measurements in pp collisions at root s=0.9 and 7 TeV with the ALICE experiment at the LHC
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :7
-
Tidskriftsartikel (refereegranskat)abstract
- We present measurements of Underlying Event observables in pp collisions at root s = 0 : 9 and 7 TeV. The analysis is performed as a function of the highest charged-particle transverse momentum p(T),L-T in the event. Different regions are defined with respect to the azimuthal direction of the leading (highest transverse momentum) track: Toward, Transverse and Away. The Toward and Away regions collect the fragmentation products of the hardest partonic interaction. The Transverse region is expected to be most sensitive to the Underlying Event activity. The study is performed with charged particles above three different p(T) thresholds: 0.15, 0.5 and 1.0 GeV/c. In the Transverse region we observe an increase in the multiplicity of a factor 2-3 between the lower and higher collision energies, depending on the track p(T) threshold considered. Data are compared to PYTHIA 6.4, PYTHIA 8.1 and PHOJET. On average, all models considered underestimate the multiplicity and summed p(T) in the Transverse region by about 10-30%.
|
|
| 4. |
- Crispin, Annica, et al.
(författare)
-
Influence of dopant on the electronic structure of spiro-oligophenyl-based disordered organic semiconductors
- 2002
-
Ingår i: Journal of Chemical Physics. - : AIP Publishing. - 0021-9606 .- 1089-7690. ; 116:18, s. 8159-8167
-
Tidskriftsartikel (refereegranskat)abstract
- The influence of the dopant on the electronic structure of spiro-oligophenyl-based disordered organic semiconductors was studied by means of photoelectron spectroscopy. With lithium atoms as dopants, two charges were stored on the same spiro branch in the form of bipolarons, for spiro-quarterphenyl and spiro-sexiphenyl. For doping with the sodium atoms, the size of the counter ions made it less energetically desirable to store two charges onto a single branch, and the charged species were polarons independent of the level of doping which was confirmed by optical absorption data.
|
|
| 5. |
- Crispin, Annica, 1972-, et al.
(författare)
-
Transition between energy level alignment regimes at a low band gap polymer-electrode interfaces
- 2006
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 89:21
-
Tidskriftsartikel (refereegranskat)abstract
- The energy level alignment at interfaces between a low band gap conjugated polymer and various electrodes is investigated using ultraviolet photoemission spectroscopy. When the electrode work function is lower (higher) than the negative (positive) polaronic level of the polymer, the Fermi level is pinned to the negative (positive) polaronic level. These Fermi level pinning regimes suggest a spontaneous electron transfer from or towards the electrode resulting in an interfacial dipole of different orientation. On the contrary, when the substrate work function is intermediate, there is no charge transfer and the energy level alignment across the interface follows the Schottky-Mott limit. © 2006 American Institute of Physics.
|
|
| 6. |
- Crispin, Xavier, et al.
(författare)
-
Characterization of the interface dipole at organic/metal interfaces
- 2002
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 124:27, s. 8131-8141
-
Tidskriftsartikel (refereegranskat)abstract
- In organics-based (opto)electronic devices, the interface dipoles formed at the organic/metal interfaces play a key role in determining the barrier for charge (hole or electron) injection between the metal electrodes and the active organic layers. The origin of this dipole is rationalized here from the results of a joint experimental and theoretical study based on the interaction between acrylonitrile, a p-conjugated molecule, and transition metal surfaces (Cu, Ni, and Fe). The adsorption of acrylonitrile on these surfaces is investigated experimentally by photoelectron spectroscopies, while quantum mechanical methods based on density functional theory are used to study the systems theoretically. It appears that the interface dipole formed at an organic/metal interface can be divided into two contributions: (i) the first corresponds to the "chemical" dipole induced by a partial charge transfer between the organic layers and the metal upon chemisorption of the organic molecules on the metal surface, and (ii) the second relates to the change in metal surface dipole because of the modification of the metal electron density tail that is induced by the presence of the adsorbed organic molecules. Our analysis shows that the charge injection barrier in devices can be tuned by modulating various parameters: the chemical potential of the bare metal (given by its work function), the metal surface dipole, and the ionization potential and electron affinity of the organic layer.
|
|
| 7. |
- Crispin, Xavier, 1972-, et al.
(författare)
-
Electronic delocalization in discotic liquid crystals : A joint experimental and theoretical study
- 2004
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 126:38, s. 11889-11899
-
Tidskriftsartikel (refereegranskat)abstract
- Discotic liquid crystals emerge as very attractive materials for organic-based (opto)electronics as they allow efficient charge and energy transport along self-organized molecular columns. Here, angle-resolved photoelectron spectroscopy (ARUPS) is used to investigate the electronic structure and supramolecular organization of the discotic molecule, hexakis(hexylthio)diquinoxalino[2,3-a:2′,3′-c]phenazine, deposited on graphite. The ARUPS data reveal significant changes in the electronic properties when going from disordered to columnar phases, the main feature being a decrease in ionization potential by 1.8 eV following the appearance of new electronic states at low binding energy. This evolution is rationalized by quantum-chemical calculations performed on model stacks containing from two to six molecules, which illustrate the formation of a quasi-band structure with Bloch-like orbitals delocalized over several molecules in the column. The ARUPS data also point to an energy dispersion of the upper π-bands in the columns by some 1.1 eV, therefore highlighting the strongly delocalized nature of the π-electrons along the discotic stacks.
|
|
| 8. |
- Crispin, Xavier, 1972-, et al.
(författare)
-
The origin of the high conductivity of poly(3,4-ethylenedioxythiophene)- poly(styrenesulfonate) (PEDOT-PSS) plastic electrodes
- 2006
-
Ingår i: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 18:18, s. 4354-4360
-
Tidskriftsartikel (refereegranskat)abstract
- The development of printed and flexible (opto)electronics requires specific materials for the device's electrodes. Those materials must satisfy a combination of properties. They must be electrically conducting, transparent, printable, and flexible. The conducting polymer poly(3,4-ethylenedioxythiophene) - poly-(styrenesulfonate) (PEDOT-PSS) is known as a promising candidate. Its conductivity can be increased by 3 orders of magnitude by the secondary dopant diethylene glycol (DEG). This "secondary doping" phenomenon is clarified in a combined photoelectron spectroscopy and scanning probe microscopy investigation. PEDOT-PSS appears to form a three-dimensional conducting network explaining the improvement of its electrical property upon addition of DEG. Polymer light emitting diodes are successfully fabricated using the transparent plastic PEDOT-PSS electrodes instead of the traditionally used indium tin oxide. © 2006 American Chemical Society.
|
|
| 9. |
- Crispin, Xavier, et al.
(författare)
-
Understanding the initial stages of polymer grafting on metals : A photoelectron spectroscopy study of acrylonitrile adsorption on transition metal surfaces
- 2001
-
Ingår i: Journal of Electron Spectroscopy and Related Phenomena. - 0368-2048 .- 1873-2526. ; 121:1-3, s. 57-74
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray and UV photoelectron spectroscopies show that acrylonitrile is chemisorbed on iron, nickel and copper polycrystalline surfaces via the carbon and nitrogen atoms. Depending on the conditions used, different adsorption geometries are found. The molecules can either be adsorbed flat on the surface and chemically bound by a (2pp)-(3d/4s) overlap via both the C=C double bond and the C=N nitrile group or they can be adsorbed perpendicular to the surface via a covalent interaction between the nitrogen lone pair and the 3d-4s levels of the metals. Analysis of the XPS data obtained on molecular mono-layers chemisorbed on metal surfaces emphasizes the importance of initial-state effects (charge transfer upon chemisorption, contribution of the metal surface dipole) and final-state effects (metal screening and polarization effect within the mono-layer). The correlation between the XPS and UPS data illustrates the importance of the metal surface dipole in understanding the workfunction changes upon molecular adsorption on metal surfaces. © 2001 Elsevier Science B.V. All rights reserved.
|
|
| 10. |
- Fahlman, Mats, et al.
(författare)
-
Electronic structure of hybrid interfaces for polymer-based electronics
- 2007
-
Ingår i: Journal of Physics. - : IOP Publishing. - 0953-8984 .- 1361-648X. ; 19:18
-
Forskningsöversikt (refereegranskat)abstract
- The fundamentals of the energy level alignment at anode and cathode electrodes in organic electronics are described. We focus on two different models that treat weakly interacting organic/metal (and organic/organic) interfaces: the induced density of interfacial states model and the so-called integer charge transfer model. The two models are compared and evaluated, mainly using photoelectron spectroscopy data of the energy level alignment of conjugated polymers and molecules at various organic/metal and organic/organic interfaces. We show that two different alignment regimes are generally observed: (i) vacuum level alignment, which corresponds to the lack of vacuum level offsets (Schottky-Mott limit) and hence the lack of charge transfer across the interface, and (ii) Fermi level pinning where the resulting work function of an organic/metal and organic/organic bilayer is independent of the substrate work function and an interface dipole is formed due to charge transfer across the interface. We argue that the experimental results are best described by the integer charge transfer model which predicts the vacuum level alignment when the substrate work function is above the positive charge transfer level and below the negative charge transfer level of the conjugated material. The model further predicts Fermi level pinning to the positive (negative) charge transfer level when the substrate work function is below (above) the positive (negative) charge transfer level. The nature of the integer charge transfer levels depend on the materials system: for conjugated large molecules and polymers, the integer charge transfer states are polarons or bipolarons, for small molecules' highest occupied and lowest unoccupied molecular orbitals and for crystalline systems, the relevant levels are the valence and conduction band edges. Finally, limits and further improvements to the integer charge transfer model are discussed as well as the impact on device design. © IOP Publishing Ltd.
|
|
