| 1. |
- Alberdi, Alberto, et al.
(författare)
-
Tribological behavior of nanocomposite coatings based on fullerene-like structures
- 2011
-
Ingår i: Vacuum. - : Elsevier BV. - 0042-207X .- 1879-2715. ; 85:12, s. 1087-1092
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents a new group of nanocomposite coatings based on integrating inorganic fullerene-like material (IFLM) structures into conventional coating matrices. Such coatings have been developed within the scope of the European funded FOREMOST project (FP6-NMP3-CT-2005-515840). Regarding the synthesis of these nanocomposite coatings based on fullerene-like components, two alternative routes were explored: introducing preformed IFLMs into the coating deposition process or forming the fullerene-like components in situ during the coating deposition process. Both methods have been demonstrated to be technically feasible, depending on the nature of the coating matrix or the desired fullerene-like structure. These new materials allow some independent control of tribological properties usually known as antagonists (very high load bearing capacity with a very low friction coefficient). In the case of unidirectional movement, under dry conditions, the best coatings developed in FOREMOST displayed a coefficient of friction in air within the range 0.04-0.10, depending on the degree of humidity and the test conditions. Pure sliding laboratory tests indicate that for some industrial applications fullerene-like nanocomposite coatings can give significant reductions in wear and friction coefficient when compared to similar coatings without fullerene-like components. The lubrication mechanisms through which these fullerene-like structures improve friction and prevent wear are also discussed in this paper.
|
|
| 2. |
- Blomqvist, M., et al.
(författare)
-
Structural and tribological properties of cluster-assembled CNx films
- 2007
-
Ingår i: Applied Physics A. - : Springer Science and Business Media LLC. - 0947-8396 .- 1432-0630. ; 87:4, s. 767-772
-
Tidskriftsartikel (refereegranskat)abstract
- We report the structural and tribological characterization of nanostructured CNx thin films produced by the deposition of a supersonic carbon cluster beam assisted by nitrogen ion bombardment. The influence of the deposition parameters on the chemical composition and structure of the films has been systematically studied by X-ray photoelectron spectroscopy, elastic recoil detection analysis, transmission electron microscopy and atomic force microscopy. Depending on the deposition parameters, the films show a structure ranging from amorphous to disordered graphitic with interlinked planes. Nitrogen content depends on the nitrogen ion kinetic energy. The films have a very low density with a high surface roughness. Friction measurements at the nanoscale show a correlation between nitrogen content and mechanical properties of the system.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Jenei, István Zoltán, et al.
(författare)
-
Correlation Studies of WS2 Fullerene-Like Nanoparticles Enhanced Tribofilms : A Scanning Electron Microscopy Analysis
- 2013
-
Ingår i: Tribology letters. - : Springer Science and Business Media LLC. - 1023-8883 .- 1573-2711. ; 51:3, s. 461-468
-
Tidskriftsartikel (refereegranskat)abstract
- The beneficiary effects of tungsten disulphide (WS2) inorganic fullerene-like nanoparticles (IFLNPs) in the lubrication industry were shown in recent years. However, their successful incorporation into lubricants (oils, greases) is not straightforward. In practice, the lubricant contains several components for different purposes, e.g. reducing the oxidization of the oil (antioxidant), minimizing the wear rate (anti-wear additive), dispersants, etc. These additives can contain chemically active compounds, which under the lubrication process (where locally extreme conditions can develop: high pressure and flash temperatures) can change the chemistry in the contact zone and block the beneficial effects of the inorganic nanoparticles. In this investigation, poly-alpha-olefin (PAO) is being used as base oil in which the WS2 nanoparticles and different additives are mixed. A ball-on-disc sliding test revealed that certain additives inhibit the nanoparticles to reduce friction (less than 5 % decrease in friction coefficient), while in other cases, the friction reduction was above 50 %. The comparison is being made between PAO + additive and PAO + additive + IFLNPs. Scanning electron microscope and energy dispersive X-ray spectroscopy were used to investigate the elemental composition of the tribofilms formed on the wear marks. Further analysis was made in order to reveal correlations between elemental compositions of the tribofilms and external parameters such as the friction coefficient and wear rate. For instance, a strong correlation between tungsten content of the tribofilm and the friction coefficient was found.
|
|
| 7. |
- Jenei, István Zoltán, 1985-
(författare)
-
Nanoparticle assisted tribofilm formation and material transfer studied with SEM and TEM
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The discovery and subsequent synthesis of metal containing fullerenes- IFS (Inorganic Fullerene-like Structures) by R. Tenne et al. has generated considerable scientific interest with great potential impact in many industrial application areas such as lubrication. The lubrication mechanism (tribofilm formation) via exfoliation and deposition of the atomic layers from this cage-like IF-particles was revealed and demonstrated first by this research group. The incorporation of the nanoparticles into lubricants (oils, greases) is however not straightforward.When two surfaces are sliding against each other and a lubricant is used, a thin layer (tribofilm) is formed on the contact area. The friction reducing effects of the nanoparticles can be altered or hindered by certain additives that are used in lubricative oils. The effects of such additives on the tribological behavior of the nanoparticles are investigated by analyzing the tribofilms formed on the worn surfaces using energy-dispersive X-ray spectroscopy in a scanning electron microscope. Another challenge of nanoparticles in lubricants is the penetration of the nanoparticles into the contact zone. A possible solution of this problem is briefly discussed.A modified burnishing technique can be used to coat sliding metallic surfaces with a friction reducing tribofilm. The morphology and composition of these tribofilms was investigated with analytical electron microscopy techniques.In the second part of the thesis electron microscopy was used to investigate the material transfer. Titanium is an elements with high adhesive ability to the counter surface, it displays poor tribological properties in sliding metallic contacts. This can lead to material transfer and consequently severe surface damage. The cold formation and machining of titanium, thus can lead rapid tool wear and poor surface finish. Electron microscopy techniques were used to study the mechanism of titanium transfer to different counter surfaces.
|
|
| 8. |
- Jenei, István Zoltán
(författare)
-
Scanning electron microscopy (SEM) analysis of tribofilms enhanced by fullerene-like nanoparticles
- 2012
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The beneficiary effects of WS2 inorganic fullerene-like nanoparticles in the lubrication industry were shown in recent years. The incorporation of the nanoparticles into lubricants (oils, greases) is however not straightforward.When two surfaces are sliding against each other and a lubricant is used, a thin layer (tribofilm) is formed on the contact area, which effects the friction process. Lubricants usually contain several additives. These additives can impair the friction reducing behaviour of the WS2 inorganic fullerene-like nanoparticles. This thesis investigates the effects of several additives in the lubrication process by analysing the tribofilms formed on the worn surfaces using energy-dispersive X-ray spectroscopy in a scanning electron microscope.
|
|
| 9. |
- Kashtanov, Stepan, et al.
(författare)
-
Characterization of aza-fullerene C58N2 isomers by X-ray spectroscopy
- 2003
-
Ingår i: Chemical Physics Letters. - : Elsevier BV. - 0009-2614 .- 1873-4448. ; 371:02-jan, s. 98-104
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray photoelectron and near-edge X-ray absorption fine-structure spectra (NEXAFS) of four isomers of C58N2 are predicted by means of density-functional theory calculations. A strong isomer dependence for both types of spectra are found. The spectroscopic findings are discussed in conjunction with results from electronic and geometric structure optimizations.
|
|
| 10. |
|
|
