| 1. |
- Arrhenius, Karine, et al.
(författare)
-
Need for a protocol for performance evaluation of the gas analyzers used in biomethane conformity assessment
- 2024
-
Ingår i: Accreditation and Quality Assurance. - : Springer Science and Business Media Deutschland GmbH. - 0949-1775 .- 1432-0517. ; 29:1, s. 69-76
-
Tidskriftsartikel (refereegranskat)abstract
- Biomethane may contain trace components that can have adverse effects on gas vehicles performances and on the pipelines when injected in the gas grid. Biomethane quality assurance against specifications is therefore crucial for the integrity of the end-users’ appliances. Analytical methods used to assess biomethane conformity assessment must be validated properly and possibly, new methods specifically for biomethane should be developed. This paper provides an overview of the biomethane quality assurance infrastructure and the challenges faced with focus on sampling, analysis methods, reference gas mixtures, and performance evaluation. Currently, requirements for analytical method validation and fit-for-purpose assessments do not exist for biomethane. The industry is in urgent need of a protocol to evaluate the fit-for-purpose of methods in a harmonized manner. Reference gas mixtures to check the accuracy of the instrument and to determine the traceability of the measurement are also urgently required.
|
|
| 2. |
- Arrhenius, Karine, et al.
(författare)
-
Suitability of vessels and adsorbents for the short-term storage of biogas/biomethane for the determination of impurities – Siloxanes, sulfur compounds, halogenated hydrocarbons, BTEX
- 2017
-
Ingår i: Biomass and Bioenergy. - : Elsevier BV. - 0961-9534 .- 1873-2909. ; 105, s. 127-135
-
Tidskriftsartikel (refereegranskat)abstract
- Biogas is a renewable energy source with many different production pathways and various excellent opportunities to use, for example as vehicle fuel (biomethane). Reliable analytical methodologies for assessing the quality of the gas are critical to ensure that the gas can technically and safely be used. An essential part of any procedure aiming to determine the quality is the sampling and the transfer to the laboratory. One of the greatest challenges is then to ensure that the composition of the sample collected does not change between the time of sampling and the analysis. The choice of the sampling vessel to be used must be made only after fully assessing its short-term stability. In this paper, the results from short-term stability studies in different vessels (cylinders, bags and sorbents) are presented for siloxanes, BTEX, halogenated hydrocarbons and sulfur compounds. Storage of dry gas at high pressure (> 6 MPa) appears to be a good alternative however it is currently challenging to find an optimal treatment of the cylinders for all species to be assessed in biogas/biomethane. At lower pressure, adsorption effects on the inner surface of the cylinders have been observed. The use of bags and sorbent tubes also shows limitation. No existing sorbent tubes are sufficiently universal as to trap all possible impurities and high boiling compounds may adsorbed on the inner surface of the bags walls. Moreover, the presence of water when storing biogas most certainly impacts the storage stability of compounds in most vessels. Using at least two sampling methods for a given compound and comparing results will allow taking into account the eventual effects of water vapour, and adsorption on the inner surface of the vessels.
|
|
| 3. |
- Arrhenius, Karine, et al.
(författare)
-
Traceable reference gas mixtures for sulfur-free natural gas odorants
- 2014
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 13:1, s. 6695-6702
-
Tidskriftsartikel (refereegranskat)abstract
- The first reference gas mixtures of sulfur-free natural gas odorants that are traceable to the International System of Units (SI) have been produced and their compositions validated. These mixtures, which contain methyl acrylate and ethyl acrylate at amount fractions between 1.1 and 2.1 μmol mol-1, can be used to underpin measurements of sulfur-free odorants, which are increasingly being used to odorize natural gas in transmission networks as they have less harmful properties than traditional sulfur-containing odorants. The reference gas mixtures produced have been shown to be stable in passivated aluminum cylinders for at least 8 months and have been validated (to within 6% or less) by interlaboratory measurements at three National Measurement Institutes. The stability of methyl acrylate and ethyl acrylate in gas sampling bags has been investigated, and the challenges of analyzing 2-ethyl-3- methylpyrazine, which is used as a stabilizer in sulfur-free odorants, are also briefly discussed.
|
|
| 4. |
- Brown, Andrew S., et al.
(författare)
-
Sampling of gaseous sulfur-containing compounds at low concentrations with a review of best-practice methods for biogas and natural gas applications
- 2015
-
Ingår i: TrAC. Trends in analytical chemistry. - : Elsevier BV. - 0165-9936 .- 1879-3142. ; 64, s. 42-52
-
Tidskriftsartikel (refereegranskat)abstract
- The accurate quantification of low-concentration sulfur-containing compounds is essential for the biogas and natural gas industries. We review literature data for the stability of these compounds in standard gas mixtures when sampled in cylinders with different passivations, sample bags, sorbent tubes, solid-phase microextraction and glass sampling bulbs, and we present new data obtained at our three National Measurement Institutes. We show that losses of sulfur-containing compounds are minimized when using passivated sampling cylinders, and the most suitable sorbent material for sampling these compounds is Tenax TA. We also discuss methods for transferring gas from sample vessels to analyzers and give recommendations for the selection of regulators (and other pressure-reducing devices) and transfer lines. Further, we propose approaches that could be taken to reduce or correct for losses in order to provide more accurate measurements of sulfur-containing compounds.
|
|
| 5. |
- Culleton, Lucy, et al.
(författare)
-
Characterization of Fourier Transform Infrared, Cavity Ring-Down Spectroscopy, and Optical Feedback Cavity-Enhanced Absorption Spectroscopy Instruments for the Analysis of Ammonia in Biogas and Biomethane
- 2022
-
Ingår i: Analytical Chemistry. - : American Chemical Society. - 0003-2700 .- 1520-6882. ; 94:44, s. 15207-15214
-
Tidskriftsartikel (refereegranskat)abstract
- Novel traceable analytical methods and reference gas standards were developed for the detection of trace-level ammonia in biogas and biomethane. This work focused on an ammonia amount fraction at an upper limit level of 10 mg m-3(corresponding to approximately 14 μmol mol-1) specified in EN 16723-1:2016. The application of spectroscopic analytical methods, such as Fourier transform infrared spectroscopy, cavity ring-down spectroscopy, and optical feedback cavity-enhanced absorption spectroscopy, was investigated. These techniques all exhibited the necessary ammonia sensitivity at the required 14 μmol mol-1amount fraction. A 29-month stability study of reference gas mixtures of 10 μmol mol-1ammonia in methane and synthetic biogas is also reported.
|
|
