| 1. |
- Paradela, C., et al.
(författare)
-
High accuracy 235U(n,f) data in the resonance energy region
- 2016
-
Ingår i: EPJ Web of Conferences. - : EDP Sciences. - 2100-014X.
-
Konferensbidrag (refereegranskat)abstract
- The U-235 neutron-induced cross section is widely used as reference cross section for measuring other fission cross sections, but in the resonance region it is not considered as an IAEA standard because of the scarce experimental data covering the full region. In this work, we deal with a new analysis of the experimental data obtained with a detection setup based on parallel plate ionization chambers (PPACs) at the CERN n_TOF facility in the range from 1 eV to 10 keV. The relative cross section has been normalised to the IAEA value in the region between 7.8 and 11 eV, which is claimed as well-known. Comparison with the ENDF/B-VII evaluation and the IAEA reference file from 100 eV to 10 keV are provided.
|
|
| 2. |
- Mattsson, Niklas, 1979, et al.
(författare)
-
The Alzheimer's Association external quality control program for cerebrospinal fluid biomarkers.
- 2011
-
Ingår i: Alzheimer's & dementia : the journal of the Alzheimer's Association. - : Wiley. - 1552-5279. ; 7:4
-
Tidskriftsartikel (refereegranskat)abstract
- The cerebrospinal fluid (CSF) biomarkers amyloid β (Aβ)-42, total-tau (T-tau), and phosphorylated-tau (P-tau) demonstrate good diagnostic accuracy for Alzheimer's disease (AD). However, there are large variations in biomarker measurements between studies, and between and within laboratories. The Alzheimer's Association has initiated a global quality control program to estimate and monitor variability of measurements, quantify batch-to-batch assay variations, and identify sources of variability. In this article, we present the results from the first two rounds of the program.
|
|
| 3. |
- Gomez-Carretero, S., et al.
(författare)
-
Correction: Redox-active conducting polymers modulate Salmonella biofilm formation by controlling availability of electron acceptors (vol 3, article number 19, 2017)
- 2018
-
Ingår i: npj Biofilms and Microbiomes. - : Nature Publishing Group. - 2055-5008. ; 4:1
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- In the original published article, the author list did not include Karl Svennersten, Kristin Persson, Edwin Jager and Magnus Berggren. After publication, we were notified by the corresponding author that the author list did not accurately reflect the contributions made, and these authors have been added to the author list. The original “Author Contributions” stated that “S.G.C., M.R., and A.R.D. designed research; S.G.C. performed all experiments…” this has been updated to read “S.G.C., K.S., K.M.P., E.W.H.J., M.B., M.R., and A.R.D. designed research; K.S., K.M.P., and E.W.H.J. performed experiments; S.G.C. performed all reported experiments…”. The “Acknowledgements” previously read “We thank K. Svennersten, A. Kader, K. Persson, and M. Berggren for fruitful discussions, and S. Löffler for insightful comments on the manuscript…” and have been updated to state “We thank A. Kader for fruitful discussions and S. Loffler for insightful comments on the manuscript…”. The “Competing Interests” section did not require any amendments. All authors have agreed with this correction statement and authorship change.
|
|
| 4. |
- Gomez-Carretero, S, et al.
(författare)
-
Redox-active conducting polymers modulate Salmonella biofilm formation by controlling availability of electron acceptors
- 2017
-
Ingår i: NPJ biofilms and microbiomes. - : Springer Science and Business Media LLC. - 2055-5008. ; 3, s. 19-
-
Tidskriftsartikel (refereegranskat)abstract
- Biofouling is a major problem caused by bacteria colonizing abiotic surfaces, such as medical devices. Biofilms are formed as the bacterial metabolism adapts to an attached growth state. We studied whether bacterial metabolism, hence biofilm formation, can be modulated in electrochemically active surfaces using the conducting conjugated polymer poly(3,4-ethylenedioxythiophene) (PEDOT). We fabricated composites of PEDOT doped with either heparin, dodecyl benzene sulfonate or chloride, and identified the fabrication parameters so that the electrochemical redox state is the main distinct factor influencing biofilm growth. PEDOT surfaces fitted into a custom-designed culturing device allowed for redox switching in Salmonella cultures, leading to oxidized or reduced electrodes. Similarly large biofilm growth was found on the oxidized anodes and on conventional polyester. In contrast, biofilm was significantly decreased (52–58%) on the reduced cathodes. Quantification of electrochromism in unswitched conducting polymer surfaces revealed a bacteria-driven electrochemical reduction of PEDOT. As a result, unswitched PEDOT acquired an analogous electrochemical state to the externally reduced cathode, explaining the similarly decreased biofilm growth on reduced cathodes and unswitched surfaces. Collectively, our findings reveal two opposing effects affecting biofilm formation. While the oxidized PEDOT anode constitutes a renewable electron sink that promotes biofilm growth, reduction of PEDOT by a power source or by bacteria largely suppresses biofilm formation. Modulating bacterial metabolism using the redox state of electroactive surfaces constitutes an unexplored method with applications spanning from antifouling coatings and microbial fuel cells to the study of the role of bacterial respiration during infection.
|
|
| 5. |
- Gomez-Carretero, S., et al.
(författare)
-
Redox-active conducting polymers modulate Salmonella biofilm formation by controlling availability of electron acceptors (vol 3, article number 19, 2017)
- 2017
-
Ingår i: npj Biofilms and Microbiomes. - : Springer Science and Business Media LLC. - 2055-5008. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- Biofouling is a major problem caused by bacteria colonizing abiotic surfaces, such as medical devices. Biofilms are formed as the bacterial metabolism adapts to an attached growth state. We studied whether bacterial metabolism, hence biofilm formation, can be modulated in electrochemically active surfaces using the conducting conjugated polymer poly(3,4-ethylenedioxythiophene) (PEDOT). We fabricated composites of PEDOT doped with either heparin, dodecyl benzene sulfonate or chloride, and identified the fabrication parameters so that the electrochemical redox state is the main distinct factor influencing biofilm growth. PEDOT surfaces fitted into a custom-designed culturing device allowed for redox switching in Salmonella cultures, leading to oxidized or reduced electrodes. Similarly large biofilm growth was found on the oxidized anodes and on conventional polyester. In contrast, biofilm was significantly decreased (52-58%) on the reduced cathodes. Quantification of electrochromism in unswitched conducting polymer surfaces revealed a bacteria-driven electrochemical reduction of PEDOT. As a result, unswitched PEDOT acquired an analogous electrochemical state to the externally reduced cathode, explaining the similarly decreased biofilm growth on reduced cathodes and unswitched surfaces. Collectively, our findings reveal two opposing effects affecting biofilm formation. While the oxidized PEDOT anode constitutes a renewable electron sink that promotes biofilm growth, reduction of PEDOT by a power source or by bacteria largely suppresses biofilm formation. Modulating bacterial metabolism using the redox state of electroactive surfaces constitutes an unexplored method with applications spanning from antifouling coatings and microbial fuel cells to the study of the role of bacterial respiration during infection.
|
|
| 6. |
|
|
| 7. |
- Antypas, H., et al.
(författare)
-
A universal platform for selection and high-resolution phenotypic screening of bacterial mutants using the nanowell slide
- 2018
-
Ingår i: Lab on a Chip. - : ROYAL SOC CHEMISTRY. - 1473-0197 .- 1473-0189. ; 18:12, s. 1767-1777
-
Tidskriftsartikel (refereegranskat)abstract
- The Petri dish and microtiter plate are the golden standard for selection and screening of bacteria in microbiological research. To improve on the limited resolution and throughput of these methods, we developed a universal, user-friendly platform for selection and high-resolution phenotypic screening based on the nanowell slide. This miniaturized platform has an optimal ratio between throughput and assay complexity, holding 672 nanowells of 500 nl each. As monoclonality is essential in bacterial genetics, we used FACS to inoculate each nanowell with a single bacterium in 15 min. We further extended the protocol to select and sort only bacteria of interest from a mixed culture. We demonstrated this by isolating single transposon mutants generated by a custom-made transposon with dual selection for GFP fluorescence and kanamycin resistance. Optical compatibility of the nanowell slide enabled phenotypic screening of sorted mutants by spectrophotometric recording during incubation. By processing the absorbance data with our custom algorithm, a phenotypic screen for growth-associated mutations was performed. Alternatively, by processing fluorescence data, we detected metabolism-associated mutations, exemplified by a screen for -galactosidase activity. Besides spectrophotometry, optical compatibility enabled us to perform microscopic analysis directly in the nanowells to screen for mutants with altered morphologies. Despite the miniaturized format, easy transition from nano- to macroscale cultures allowed retrieval of bacterial mutants for downstream genetic analysis, demonstrated here by a cloning-free single-primer PCR protocol. Taken together, our FACS-linked nanowell slide replaces manual selection of mutants on agar plates, and enables combined selection and phenotypic screening in a one-step process. The versatility of the nanowell slide, and the modular workflow built on mainstream technologies, makes our universal platform widely applicable in microbiological research.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
